Manually pull PDI clock pin high for 1ms before disabling PDI mode in the AVRISP...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XPROGTarget.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 01c861f..05d5ec9 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -230,6 +230,10 @@ void XPROGTarget_DisableTargetPDI(void)
        XPROGTarget_SetRxMode();\r
 \r
 #if defined(XPROG_VIA_HARDWARE_USART)\r
        XPROGTarget_SetRxMode();\r
 \r
 #if defined(XPROG_VIA_HARDWARE_USART)\r

+       /* Set /RESET high for a one millisecond to ensure target device is restarted */\r
+       PORTD |= (1 << 5);\r
+       _delay_ms(1);\r
+\r

        /* Turn off receiver and transmitter of the USART, clear settings */\r
        UCSR1A |= (1 << TXC1) | (1 << RXC1);\r
        UCSR1B  = 0;\r
        /* Turn off receiver and transmitter of the USART, clear settings */\r
        UCSR1A |= (1 << TXC1) | (1 << RXC1);\r
        UCSR1B  = 0;\r


@@ -239,6 +243,10 @@ void XPROGTarget_DisableTargetPDI(void)
        DDRD  &= ~((1 << 5) | (1 << 3));\r
        PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));\r
 #else\r
        DDRD  &= ~((1 << 5) | (1 << 3));\r
        PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));\r
 #else\r

+       /* Set /RESET high for a one millisecond to ensure target device is restarted */\r
+       BITBANG_PDICLOCK_PORT |= BITBANG_PDICLOCK_MASK;\r
+       _delay_ms(1);\r
+\r

        /* Set DATA and CLOCK lines to inputs */\r
        BITBANG_PDIDATA_DDR   &= ~BITBANG_PDIDATA_MASK;\r
        BITBANG_PDICLOCK_DDR  &= ~BITBANG_PDICLOCK_MASK;\r
        /* Set DATA and CLOCK lines to inputs */\r
        BITBANG_PDIDATA_DDR   &= ~BITBANG_PDIDATA_MASK;\r
        BITBANG_PDICLOCK_DDR  &= ~BITBANG_PDICLOCK_MASK;\r