/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
- /* Macros: */
- #define _ENDPOINT_GET_MAXSIZE(EPIndex) _ENDPOINT_GET_MAXSIZE2(ENDPOINT_DETAILS_EP ## EPIndex)
- #define _ENDPOINT_GET_MAXSIZE2(EPDetails) _ENDPOINT_GET_MAXSIZE3(EPDetails)
- #define _ENDPOINT_GET_MAXSIZE3(MaxSize, Banks) (MaxSize)
-
- #define _ENDPOINT_GET_BANKS(EPIndex) _ENDPOINT_GET_BANKS2(ENDPOINT_DETAILS_EP ## EPIndex)
- #define _ENDPOINT_GET_BANKS2(EPDetails) _ENDPOINT_GET_BANKS3(EPDetails)
- #define _ENDPOINT_GET_BANKS3(MaxSize, Banks) (Banks)
-
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- #define ENDPOINT_DETAILS_MAXEP 7
-
- #define ENDPOINT_DETAILS_EP0 64, 1
- #define ENDPOINT_DETAILS_EP1 256, 2
- #define ENDPOINT_DETAILS_EP2 64, 2
- #define ENDPOINT_DETAILS_EP3 64, 2
- #define ENDPOINT_DETAILS_EP4 64, 2
- #define ENDPOINT_DETAILS_EP5 64, 2
- #define ENDPOINT_DETAILS_EP6 64, 2
- #else
- #define ENDPOINT_DETAILS_MAXEP 5
-
- #define ENDPOINT_DETAILS_EP0 64, 1
- #define ENDPOINT_DETAILS_EP1 64, 1
- #define ENDPOINT_DETAILS_EP2 64, 1
- #define ENDPOINT_DETAILS_EP3 64, 2
- #define ENDPOINT_DETAILS_EP4 64, 2
- #endif
-
/* Inline Functions: */
static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST
ATTR_ALWAYS_INLINE;
/* Public Interface - May be used in end-application: */
/* Macros: */
- /** \name Endpoint Bank Mode Masks */
- //@{
- /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates
- * that the endpoint should have one single bank, which requires less USB FIFO memory but results
- * in slower transfers as only one USB device (the AVR or the host) can access the endpoint's
- * bank at the one time.
- */
- #define ENDPOINT_BANK_SINGLE (0 << EPBK0)
-
- /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates
- * that the endpoint should have two banks, which requires more USB FIFO memory but results
- * in faster transfers as one USB device (the AVR or the host) can access one bank while the other
- * accesses the second bank.
- */
- #define ENDPOINT_BANK_DOUBLE (1 << EPBK0)
- //@}
-
#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
/** Default size of the default control endpoint's bank, until altered by the control endpoint bank size
* value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined.
#define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8
#endif
- /** Retrieves the maximum bank size in bytes of a given endpoint.
- *
- * \attention This macro will only work correctly on endpoint indexes that are compile-time constants
- * defined by the preprocessor.
- *
- * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1)
- */
- #define ENDPOINT_MAX_SIZE(EPIndex) _ENDPOINT_GET_MAXSIZE(EPIndex)
-
- /** Retrieves the total number of banks supported by the given endpoint.
- *
- * \attention This macro will only work correctly on endpoint indexes that are compile-time constants
- * defined by the preprocessor.
- *
- * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1)
- */
- #define ENDPOINT_BANKS_SUPPORTED(EPIndex) _ENDPOINT_GET_BANKS(EPIndex)
-
#if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__)
- /** Total number of endpoints (including the default control endpoint at address 0) which may
- * be used in the device. Different USB AVR models support different amounts of endpoints,
- * this value reflects the maximum number of endpoints for the currently selected AVR model.
- */
- #define ENDPOINT_TOTAL_ENDPOINTS ENDPOINT_DETAILS_MAXEP
+ #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
+ #define ENDPOINT_TOTAL_ENDPOINTS 7
+ #else
+ /** Total number of endpoints (including the default control endpoint at address 0) which may
+ * be used in the device. Different USB AVR models support different amounts of endpoints,
+ * this value reflects the maximum number of endpoints for the currently selected AVR model.
+ */
+ #define ENDPOINT_TOTAL_ENDPOINTS 5
+ #endif
#else
#define ENDPOINT_TOTAL_ENDPOINTS 1
#endif
};
/* Inline Functions: */
- /** Configures the specified endpoint number with the given endpoint type, direction, bank size
- * and banking mode. Once configured, the endpoint may be read from or written to, depending
- * on its direction.
+ /** Configures the specified endpoint address with the given endpoint type, bank size and number of hardware
+ * banks. Once configured, the endpoint may be read from or written to, depending on its direction.
*
- * \param[in] Number Endpoint number to configure. This must be more than 0 and less than
- * \ref ENDPOINT_TOTAL_ENDPOINTS.
+ * \param[in] Address Endpoint address to configure.
*
* \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types
* are available on Low Speed USB devices - refer to the USB 2.0 specification.
*
- * \param[in] Direction Endpoint data direction, either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN.
- * All endpoints (except Control type) are unidirectional - data may only be read
- * from or written to the endpoint bank based on its direction, not both.
- *
* \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted
* to the USB host, or after they have been received from the USB host (depending on
* the endpoint's data direction). The bank size must indicate the maximum packet size
* that the endpoint can handle.
*
- * \param[in] Banks Number of banks to use for the endpoint being configured, an \c ENDPOINT_BANK_* mask.
- * More banks uses more USB DPRAM, but offers better performance. Isochronous type
- * endpoints <b>must</b> have at least two banks.
+ * \param[in] Banks Number of banks to use for the endpoint being configured.
*
* \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in
* ascending order, or bank corruption will occur.
*
* \return Boolean \c true if the configuration succeeded, \c false otherwise.
*/
- static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number,
+ static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address,
const uint8_t Type,
- const uint8_t Direction,
const uint16_t Size,
const uint8_t Banks) ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number,
+ static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address,
const uint8_t Type,
- const uint8_t Direction,
const uint16_t Size,
const uint8_t Banks)
{
- return Endpoint_ConfigureEndpoint_Prv(Number, ((Type << EPTYPE0) | (Direction ? (1 << EPDIR) : 0)),
- ((1 << ALLOC) | Banks | Endpoint_BytesToEPSizeMask(Size)));
+ return Endpoint_ConfigureEndpoint_Prv((Address & ENDPOINT_EPNUM_MASK),
+ ((Type << EPTYPE0) | ((Address & ENDPOINT_DIR_IN) ? (1 << EPDIR) : 0)),
+ ((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Endpoint_BytesToEPSizeMask(Size)));
}
/** Indicates the number of bytes currently stored in the current endpoint's selected bank.
#endif
}
+ /** Determines the currently selected endpoint's direction.
+ *
+ * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask.
+ */
+ static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline uint8_t Endpoint_GetEndpointDirection(void)
+ {
+ return (UECFG0X & (1 << EPDIR)) ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT;
+ }
+
/** Get the endpoint address of the currently selected endpoint. This is typically used to save
- * the currently selected endpoint number so that it can be restored after another endpoint has
- * been manipulated.
+ * the currently selected endpoint so that it can be restored after another endpoint has been
+ * manipulated.
*
* \return Index of the currently selected endpoint.
*/
static inline uint8_t Endpoint_GetCurrentEndpoint(void)
{
#if !defined(CONTROL_ONLY_DEVICE)
- return (UENUM & ENDPOINT_EPNUM_MASK);
+ return ((UENUM & ENDPOINT_EPNUM_MASK) | Endpoint_GetEndpointDirection());
#else
return ENDPOINT_CONTROLEP;
#endif
}
- /** Selects the given endpoint number. If the address from the device descriptors is used, the
- * value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint
- * number (and discarding the endpoint direction bit).
+ /** Selects the given endpoint address.
*
- * Any endpoint operations which do not require the endpoint number to be indicated will operate on
+ * Any endpoint operations which do not require the endpoint address to be indicated will operate on
* the currently selected endpoint.
*
- * \param[in] EndpointNumber Endpoint number to select.
+ * \param[in] Address Endpoint address to select.
*/
- static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber)
+ static inline void Endpoint_SelectEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_SelectEndpoint(const uint8_t Address)
{
#if !defined(CONTROL_ONLY_DEVICE)
- UENUM = EndpointNumber;
+ UENUM = (Address & ENDPOINT_EPNUM_MASK);
#endif
}
/** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's
* data In and Out pointers to the bank's contents.
*
- * \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset.
+ * \param[in] Address Endpoint address whose FIFO buffers are to be reset.
*/
- static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber)
+ static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_ResetEndpoint(const uint8_t Address)
{
- UERST = (1 << EndpointNumber);
+ UERST = (1 << (Address & ENDPOINT_EPNUM_MASK));
UERST = 0;
}
/** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type
* endpoints).
*
- * \param[in] EndpointNumber Index of the endpoint whose interrupt flag should be tested.
+ * \param[in] Address Address of the endpoint whose interrupt flag should be tested.
*
* \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise.
*/
- static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber)
+ static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address)
{
- return ((Endpoint_GetEndpointInterrupts() & (1 << EndpointNumber)) ? true : false);
+ return ((Endpoint_GetEndpointInterrupts() & (1 << (Address & ENDPOINT_EPNUM_MASK))) ? true : false);
}
/** Determines if the selected IN endpoint is ready for a new packet to be sent to the host.
UECONX |= (1 << RSTDT);
}
- /** Determines the currently selected endpoint's direction.
- *
- * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask.
- */
- static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_GetEndpointDirection(void)
- {
- return (UECFG0X & (1 << EPDIR)) ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT;
- }
-
/** Sets the direction of the currently selected endpoint.
*
* \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask.
#endif
/* Function Prototypes: */
+ /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple
+ * endpoints at the same time.
+ *
+ * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the
+ * control endpoint.
+ *
+ * \param[in] Table Pointer to a table of endpoint descriptions.
+ * \param[in] Entries Number of entries in the endpoint table to configure.
+ *
+ * \return Boolean \c true if all endpoints configured successfully, \c false otherwise.
+ */
+ bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table,
+ const uint8_t Entries);
+
/** Completes the status stage of a control transfer on a CONTROL type endpoint automatically,
* with respect to the data direction. This is a convenience function which can be used to
* simplify user control request handling.
projects / pub / USBasp.git / blobdiff