Mark build test makefiles as being incompatible with parallel make builds, as they...

[pub/USBasp.git] / LUFA / Drivers / Peripheral / AVR8 / ADC_AVR8.h

diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index ec80dd2..d85fddc 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -55,14 +55,14 @@
  *  \code
  *      // Initialize the ADC driver before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
  *  \code
  *      // Initialize the ADC driver before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);

- *
+ *      

  *      // Must setup the ADC channel to read beforehand
  *      ADC_SetupChannel(1);
  *      // Must setup the ADC channel to read beforehand
  *      ADC_SetupChannel(1);

- *
+ *      

  *      // Perform a single conversion of the ADC channel 1
  *      ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      printf("Conversion Result: %d\r\n", ADC_GetResult());
  *      // Perform a single conversion of the ADC channel 1
  *      ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      printf("Conversion Result: %d\r\n", ADC_GetResult());

- *
+ *      

  *      // Start reading ADC channel 1 in free running (continuous conversion) mode
  *      ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      for (;;)
  *      // Start reading ADC channel 1 in free running (continuous conversion) mode
  *      ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      for (;;)


@@ -248,7 +248,7 @@
                                #define ADC_INT_TEMP_SENS           ((1 << 8) | (0x07 << MUX0))
                        #endif
 
                                #define ADC_INT_TEMP_SENS           ((1 << 8) | (0x07 << MUX0))
                        #endif
 

-                       /** MUX mask define for the internal 1.1V bandgap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
+                       /** MUX mask define for the internal 1.1V band-gap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */

                        #define ADC_1100MV_BANDGAP              (0x1E << MUX0)
 
                        /** Retrieves the ADC MUX mask for the given ADC channel number.
                        #define ADC_1100MV_BANDGAP              (0x1E << MUX0)
 
                        /** Retrieves the ADC MUX mask for the given ADC channel number.