-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2010.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this \r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in \r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting \r
- documentation, and that the name of the author not be used in \r
- advertising or publicity pertaining to distribution of the \r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- * \brief Host mode driver for the library USB Mass Storage Class driver.\r
- *\r
- * Host mode driver for the library USB Mass Storage Class driver.\r
- *\r
- * \note This file should not be included directly. It is automatically included as needed by the class driver\r
- * dispatch header located in LUFA/Drivers/USB/Class/MassStorage.h.\r
- */\r
-\r
-/** \ingroup Group_USBClassMS\r
- * @defgroup Group_USBClassMassStorageHost Mass Storage Class Host Mode Driver\r
- *\r
- * \section Sec_Dependencies Module Source Dependencies\r
- * The following files must be built with any user project that uses this module:\r
- * - LUFA/Drivers/USB/Class/Host/MassStorage.c\r
- *\r
- * \section Module Description\r
- * Host Mode USB Class driver framework interface, for the Mass Storage USB Class driver.\r
- *\r
- * @{\r
- */\r
-\r
-#ifndef __MS_CLASS_HOST_H__\r
-#define __MS_CLASS_HOST_H__\r
-\r
- /* Includes: */\r
- #include "../../USB.h"\r
- #include "../Common/MassStorage.h"\r
- \r
- /* Enable C linkage for C++ Compilers: */\r
- #if defined(__cplusplus)\r
- extern "C" {\r
- #endif\r
-\r
- /* Preprocessor Checks: */\r
- #if !defined(__INCLUDE_FROM_MS_DRIVER)\r
- #error Do not include this file directly. Include LUFA/Drivers/Class/MassStorage.h instead.\r
- #endif\r
-\r
- /* Public Interface - May be used in end-application: */\r
- /* Macros: */\r
- /** Error code for some Mass Storage Host functions, indicating a logical (and not hardware) error */\r
- #define MS_ERROR_LOGICAL_CMD_FAILED 0x80\r
- \r
- /* Type Defines: */\r
- /** \brief Mass Storage Class Host Mode Configuration and State Structure.\r
- *\r
- * Class state structure. An instance of this structure should be made within the user application,\r
- * and passed to each of the Mass Storage class driver functions as the MSInterfaceInfo parameter. This\r
- * stores each Mass Storage interface's configuration and state information.\r
- */\r
- typedef struct\r
- {\r
- const struct\r
- {\r
- uint8_t DataINPipeNumber; /**< Pipe number of the Mass Storage interface's IN data pipe */\r
- bool DataINPipeDoubleBank; /** Indicates if the Mass Storage interface's IN data pipe should use double banking */\r
-\r
- uint8_t DataOUTPipeNumber; /**< Pipe number of the Mass Storage interface's OUT data pipe */\r
- bool DataOUTPipeDoubleBank; /** Indicates if the Mass Storage interface's OUT data pipe should use double banking */\r
- } Config; /**< Config data for the USB class interface within the device. All elements in this section\r
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.\r
- */\r
- struct\r
- {\r
- bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid\r
- * after \ref MS_Host_ConfigurePipes() is called and the Host state machine is in the\r
- * Configured state\r
- */\r
- uint8_t InterfaceNumber; /**< Interface index of the Mass Storage interface within the attached device */\r
-\r
- uint16_t DataINPipeSize; /**< Size in bytes of the Mass Storage interface's IN data pipe */\r
- uint16_t DataOUTPipeSize; /**< Size in bytes of the Mass Storage interface's OUT data pipe */\r
- \r
- uint32_t TransactionTag; /**< Current transaction tag for data synchronizing of packets */\r
- } State; /**< State data for the USB class interface within the device. All elements in this section\r
- * <b>may</b> be set to initial values, but may also be ignored to default to sane values when\r
- * the interface is enumerated.\r
- */\r
- } USB_ClassInfo_MS_Host_t;\r
- \r
- /** \brief SCSI Device LUN Capacity Structure.\r
- *\r
- * SCSI capacity structure, to hold the total capacity of the device in both the number\r
- * of blocks in the current LUN, and the size of each block. This structure is filled by\r
- * the device when the MassStore_ReadCapacity() function is called.\r
- */\r
- typedef struct\r
- {\r
- uint32_t Blocks; /**< Number of blocks in the addressed LUN of the device */\r
- uint32_t BlockSize; /**< Number of bytes in each block in the addressed LUN */\r
- } SCSI_Capacity_t;\r
-\r
- /* Enums: */\r
- enum MSHost_EnumerationFailure_ErrorCodes_t\r
- {\r
- MS_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully */\r
- MS_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor */\r
- MS_ENUMERROR_NoMSInterfaceFound = 2, /**< A compatible Mass Storage interface was not found in the device's Configuration Descriptor */\r
- MS_ENUMERROR_EndpointsNotFound = 3, /**< Compatible Mass Storage endpoints were not found in the device's interfaces */\r
- };\r
- \r
- /* Function Prototypes: */\r
- /** Host interface configuration routine, to configure a given Mass Storage host interface instance using the\r
- * Configuration Descriptor read from an attached USB device. This function automatically updates the given Mass\r
- * Storage Host instance's state values and configures the pipes required to communicate with the interface if it\r
- * is found within the device. This should be called once after the stack has enumerated the attached device, while\r
- * the host state machine is in the Addressed state.\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state\r
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor\r
- * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor\r
- *\r
- * \return A value from the \ref MSHost_EnumerationFailure_ErrorCodes_t enum\r
- */\r
- uint8_t MS_Host_ConfigurePipes(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, uint16_t ConfigDescriptorSize,\r
- void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);\r
-\r
- /** Sends a MASS STORAGE RESET control request to the attached device, resetting the Mass Storage Interface\r
- * and readying it for the next Mass Storage command.\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state\r
- *\r
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum\r
- */\r
- uint8_t MS_Host_ResetMSInterface(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** Sends a GET MAX LUN control request to the attached device, retrieving the index of the highest LUN (Logical\r
- * UNit, a logical drive) in the device. This value can then be used in the other functions of the Mass Storage\r
- * Host mode Class driver to address a specific LUN within the device.\r
- *\r
- * \note Some devices do not support this request, and will STALL it when issued. To get around this,\r
- * on unsupported devices the max LUN index will be reported as zero and no error will be returned\r
- * if the device STALLs the request.\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state\r
- * \param[out] MaxLUNIndex Pointer to a location where the highest LUN index value should be stored\r
- *\r
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum\r
- */\r
- uint8_t MS_Host_GetMaxLUN(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, uint8_t* const MaxLUNIndex)\r
- ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);\r
-\r
- /** Retrieves the Mass Storage device's inquiry data for the specified LUN, indicating the device characteristics and\r
- * properties.\r
- *\r
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the\r
- * call will fail.\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state\r
- * \param[in] LUNIndex LUN index within the device the command is being issued to\r
- * \param[out] InquiryData Location where the read inquiry data should be stored\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED\r
- */\r
- uint8_t MS_Host_GetInquiryData(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,\r
- SCSI_Inquiry_Response_t* const InquiryData) ATTR_NON_NULL_PTR_ARG(1)\r
- ATTR_NON_NULL_PTR_ARG(3);\r
-\r
- /** Sends a TEST UNIT READY command to the device, to determine if it is ready to accept other SCSI commands.\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state\r
- * \param[in] LUNIndex LUN index within the device the command is being issued to\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready\r
- */\r
- uint8_t MS_Host_TestUnitReady(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex)\r
- ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** Retrieves the total capacity of the attached USB Mass Storage device, in blocks, and block size.\r
- *\r
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the\r
- * call will fail.\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state\r
- * \param[in] LUNIndex LUN index within the device the command is being issued to\r
- * \param[out] DeviceCapacity Pointer to the location where the capacity information should be stored\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready\r
- */\r
- uint8_t MS_Host_ReadDeviceCapacity(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,\r
- SCSI_Capacity_t* const DeviceCapacity) ATTR_NON_NULL_PTR_ARG(1)\r
- ATTR_NON_NULL_PTR_ARG(3);\r
- \r
- /** Retrieves the device sense data, indicating the current device state and error codes for the previously\r
- * issued command.\r
- *\r
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the\r
- * call will fail.\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state\r
- * \param[in] LUNIndex LUN index within the device the command is being issued to\r
- * \param[out] SenseData Pointer to the location where the sense information should be stored\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready\r
- */\r
- uint8_t MS_Host_RequestSense(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,\r
- SCSI_Request_Sense_Response_t* const SenseData) ATTR_NON_NULL_PTR_ARG(1)\r
- ATTR_NON_NULL_PTR_ARG(3);\r
- \r
- /** Issues a PREVENT MEDIUM REMOVAL command, to logically (or, depending on the type of device, physically) lock\r
- * the device from removal so that blocks of data on the medium can be read or altered.\r
- *\r
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the\r
- * call will fail.\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state\r
- * \param[in] LUNIndex LUN index within the device the command is being issued to\r
- * \param[in] PreventRemoval Boolean true if the device should be locked from removal, false otherwise\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready\r
- */\r
- uint8_t MS_Host_PreventAllowMediumRemoval(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,\r
- const bool PreventRemoval) ATTR_NON_NULL_PTR_ARG(1);\r
- \r
- /** Reads blocks of data from the attached Mass Storage device's medium.\r
- *\r
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the\r
- * call will fail.\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state\r
- * \param[in] LUNIndex LUN index within the device the command is being issued to\r
- * \param[in] BlockAddress Starting block address within the device to read from\r
- * \param[in] Blocks Total number of blocks to read\r
- * \param[in] BlockSize Size in bytes of each block within the device\r
- * \param[out] BlockBuffer Pointer to where the read data from the device should be stored\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready\r
- */\r
- uint8_t MS_Host_ReadDeviceBlocks(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,\r
- const uint32_t BlockAddress, const uint8_t Blocks, const uint16_t BlockSize,\r
- void* BlockBuffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(6);\r
- \r
- /** Writes blocks of data to the attached Mass Storage device's medium.\r
- *\r
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the\r
- * call will fail.\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state\r
- * \param[in] LUNIndex LUN index within the device the command is being issued to\r
- * \param[in] BlockAddress Starting block address within the device to write to\r
- * \param[in] Blocks Total number of blocks to read\r
- * \param[in] BlockSize Size in bytes of each block within the device\r
- * \param[in] BlockBuffer Pointer to where the data to write should be sourced from\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready\r
- */\r
- uint8_t MS_Host_WriteDeviceBlocks(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,\r
- const uint32_t BlockAddress, const uint8_t Blocks, const uint16_t BlockSize,\r
- const void* BlockBuffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(6);\r
-\r
- /* Inline Functions: */\r
- /** General management task for a given Mass Storage host class interface, required for the correct operation of\r
- * the interface. This should be called frequently in the main program loop, before the master USB management task\r
- * \ref USB_USBTask().\r
- *\r
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state\r
- */\r
- static inline void MS_Host_USBTask(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo);\r
- static inline void MS_Host_USBTask(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo)\r
- {\r
- (void)MSInterfaceInfo;\r
- }\r
-\r
- /* Private Interface - For use in library only: */\r
- #if !defined(__DOXYGEN__)\r
- /* Macros: */\r
- #define MASS_STORE_CLASS 0x08\r
- #define MASS_STORE_SUBCLASS 0x06\r
- #define MASS_STORE_PROTOCOL 0x50\r
-\r
- #define REQ_MassStorageReset 0xFF\r
- #define REQ_GetMaxLUN 0xFE\r
-\r
- #define CBW_SIGNATURE 0x43425355UL\r
- #define CSW_SIGNATURE 0x53425355UL\r
- \r
- #define COMMAND_DIRECTION_DATA_OUT (0 << 7)\r
- #define COMMAND_DIRECTION_DATA_IN (1 << 7)\r
- \r
- #define COMMAND_DATA_TIMEOUT_MS 10000\r
-\r
- #define MS_FOUND_DATAPIPE_IN (1 << 0)\r
- #define MS_FOUND_DATAPIPE_OUT (1 << 1)\r
- \r
- /* Function Prototypes: */\r
- #if defined(__INCLUDE_FROM_MS_CLASS_HOST_C) \r
- static uint8_t DComp_NextMSInterface(void* const CurrentDescriptor);\r
- static uint8_t DComp_NextMSInterfaceEndpoint(void* const CurrentDescriptor);\r
- \r
- static uint8_t MS_Host_SendCommand(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,\r
- MS_CommandBlockWrapper_t* const SCSICommandBlock,\r
- const void* const BufferPtr);\r
- static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo);\r
- static uint8_t MS_Host_SendReceiveData(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, \r
- MS_CommandBlockWrapper_t* const SCSICommandBlock, void* BufferPtr);\r
- static uint8_t MS_Host_GetReturnedStatus(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,\r
- MS_CommandStatusWrapper_t* const SCSICommandStatus);\r
- #endif\r
- #endif\r
- \r
- /* Disable C linkage for C++ Compilers: */\r
- #if defined(__cplusplus)\r
- }\r
- #endif\r
-\r
-#endif\r
-\r
-/** @} */\r
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Host mode driver for the library USB Mass Storage Class driver.
+ *
+ * Host mode driver for the library USB Mass Storage Class driver.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the class driver
+ * dispatch header located in LUFA/Drivers/USB/Class/MassStorage.h.
+ */
+
+/** \ingroup Group_USBClassMS
+ * @defgroup Group_USBClassMassStorageHost Mass Storage Class Host Mode Driver
+ *
+ * \section Sec_Dependencies Module Source Dependencies
+ * The following files must be built with any user project that uses this module:
+ * - LUFA/Drivers/USB/Class/Host/MassStorage.c
+ *
+ * \section Module Description
+ * Host Mode USB Class driver framework interface, for the Mass Storage USB Class driver.
+ *
+ * @{
+ */
+
+#ifndef __MS_CLASS_HOST_H__
+#define __MS_CLASS_HOST_H__
+
+ /* Includes: */
+ #include "../../USB.h"
+ #include "../Common/MassStorage.h"
+
+ /* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_MS_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/Class/MassStorage.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Macros: */
+ /** Error code for some Mass Storage Host functions, indicating a logical (and not hardware) error */
+ #define MS_ERROR_LOGICAL_CMD_FAILED 0x80
+
+ /* Type Defines: */
+ /** \brief Mass Storage Class Host Mode Configuration and State Structure.
+ *
+ * Class state structure. An instance of this structure should be made within the user application,
+ * and passed to each of the Mass Storage class driver functions as the MSInterfaceInfo parameter. This
+ * stores each Mass Storage interface's configuration and state information.
+ */
+ typedef struct
+ {
+ const struct
+ {
+ uint8_t DataINPipeNumber; /**< Pipe number of the Mass Storage interface's IN data pipe */
+ bool DataINPipeDoubleBank; /** Indicates if the Mass Storage interface's IN data pipe should use double banking */
+
+ uint8_t DataOUTPipeNumber; /**< Pipe number of the Mass Storage interface's OUT data pipe */
+ bool DataOUTPipeDoubleBank; /** Indicates if the Mass Storage interface's OUT data pipe should use double banking */
+ } Config; /**< Config data for the USB class interface within the device. All elements in this section
+ * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
+ */
+ struct
+ {
+ bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
+ * after \ref MS_Host_ConfigurePipes() is called and the Host state machine is in the
+ * Configured state
+ */
+ uint8_t InterfaceNumber; /**< Interface index of the Mass Storage interface within the attached device */
+
+ uint16_t DataINPipeSize; /**< Size in bytes of the Mass Storage interface's IN data pipe */
+ uint16_t DataOUTPipeSize; /**< Size in bytes of the Mass Storage interface's OUT data pipe */
+
+ uint32_t TransactionTag; /**< Current transaction tag for data synchronizing of packets */
+ } State; /**< State data for the USB class interface within the device. All elements in this section
+ * <b>may</b> be set to initial values, but may also be ignored to default to sane values when
+ * the interface is enumerated.
+ */
+ } USB_ClassInfo_MS_Host_t;
+
+ /** \brief SCSI Device LUN Capacity Structure.
+ *
+ * SCSI capacity structure, to hold the total capacity of the device in both the number
+ * of blocks in the current LUN, and the size of each block. This structure is filled by
+ * the device when the MassStore_ReadCapacity() function is called.
+ */
+ typedef struct
+ {
+ uint32_t Blocks; /**< Number of blocks in the addressed LUN of the device */
+ uint32_t BlockSize; /**< Number of bytes in each block in the addressed LUN */
+ } SCSI_Capacity_t;
+
+ /* Enums: */
+ enum MSHost_EnumerationFailure_ErrorCodes_t
+ {
+ MS_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully */
+ MS_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor */
+ MS_ENUMERROR_NoMSInterfaceFound = 2, /**< A compatible Mass Storage interface was not found in the device's Configuration Descriptor */
+ MS_ENUMERROR_EndpointsNotFound = 3, /**< Compatible Mass Storage endpoints were not found in the device's interfaces */
+ };
+
+ /* Function Prototypes: */
+ /** Host interface configuration routine, to configure a given Mass Storage host interface instance using the
+ * Configuration Descriptor read from an attached USB device. This function automatically updates the given Mass
+ * Storage Host instance's state values and configures the pipes required to communicate with the interface if it
+ * is found within the device. This should be called once after the stack has enumerated the attached device, while
+ * the host state machine is in the Addressed state.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state
+ * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
+ * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
+ *
+ * \return A value from the \ref MSHost_EnumerationFailure_ErrorCodes_t enum
+ */
+ uint8_t MS_Host_ConfigurePipes(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, uint16_t ConfigDescriptorSize,
+ void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
+
+ /** Sends a MASS STORAGE RESET control request to the attached device, resetting the Mass Storage Interface
+ * and readying it for the next Mass Storage command.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
+ *
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
+ */
+ uint8_t MS_Host_ResetMSInterface(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Sends a GET MAX LUN control request to the attached device, retrieving the index of the highest LUN (Logical
+ * UNit, a logical drive) in the device. This value can then be used in the other functions of the Mass Storage
+ * Host mode Class driver to address a specific LUN within the device.
+ *
+ * \note Some devices do not support this request, and will STALL it when issued. To get around this,
+ * on unsupported devices the max LUN index will be reported as zero and no error will be returned
+ * if the device STALLs the request.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
+ * \param[out] MaxLUNIndex Pointer to a location where the highest LUN index value should be stored
+ *
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
+ */
+ uint8_t MS_Host_GetMaxLUN(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, uint8_t* const MaxLUNIndex)
+ ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
+ /** Retrieves the Mass Storage device's inquiry data for the specified LUN, indicating the device characteristics and
+ * properties.
+ *
+ * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
+ * \param[in] LUNIndex LUN index within the device the command is being issued to
+ * \param[out] InquiryData Location where the read inquiry data should be stored
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED
+ */
+ uint8_t MS_Host_GetInquiryData(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,
+ SCSI_Inquiry_Response_t* const InquiryData) ATTR_NON_NULL_PTR_ARG(1)
+ ATTR_NON_NULL_PTR_ARG(3);
+
+ /** Sends a TEST UNIT READY command to the device, to determine if it is ready to accept other SCSI commands.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
+ * \param[in] LUNIndex LUN index within the device the command is being issued to
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
+ */
+ uint8_t MS_Host_TestUnitReady(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex)
+ ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Retrieves the total capacity of the attached USB Mass Storage device, in blocks, and block size.
+ *
+ * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
+ * \param[in] LUNIndex LUN index within the device the command is being issued to
+ * \param[out] DeviceCapacity Pointer to the location where the capacity information should be stored
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
+ */
+ uint8_t MS_Host_ReadDeviceCapacity(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,
+ SCSI_Capacity_t* const DeviceCapacity) ATTR_NON_NULL_PTR_ARG(1)
+ ATTR_NON_NULL_PTR_ARG(3);
+
+ /** Retrieves the device sense data, indicating the current device state and error codes for the previously
+ * issued command.
+ *
+ * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
+ * \param[in] LUNIndex LUN index within the device the command is being issued to
+ * \param[out] SenseData Pointer to the location where the sense information should be stored
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
+ */
+ uint8_t MS_Host_RequestSense(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,
+ SCSI_Request_Sense_Response_t* const SenseData) ATTR_NON_NULL_PTR_ARG(1)
+ ATTR_NON_NULL_PTR_ARG(3);
+
+ /** Issues a PREVENT MEDIUM REMOVAL command, to logically (or, depending on the type of device, physically) lock
+ * the device from removal so that blocks of data on the medium can be read or altered.
+ *
+ * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
+ * \param[in] LUNIndex LUN index within the device the command is being issued to
+ * \param[in] PreventRemoval Boolean true if the device should be locked from removal, false otherwise
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
+ */
+ uint8_t MS_Host_PreventAllowMediumRemoval(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,
+ const bool PreventRemoval) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads blocks of data from the attached Mass Storage device's medium.
+ *
+ * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
+ * \param[in] LUNIndex LUN index within the device the command is being issued to
+ * \param[in] BlockAddress Starting block address within the device to read from
+ * \param[in] Blocks Total number of blocks to read
+ * \param[in] BlockSize Size in bytes of each block within the device
+ * \param[out] BlockBuffer Pointer to where the read data from the device should be stored
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
+ */
+ uint8_t MS_Host_ReadDeviceBlocks(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,
+ const uint32_t BlockAddress, const uint8_t Blocks, const uint16_t BlockSize,
+ void* BlockBuffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(6);
+
+ /** Writes blocks of data to the attached Mass Storage device's medium.
+ *
+ * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
+ * \param[in] LUNIndex LUN index within the device the command is being issued to
+ * \param[in] BlockAddress Starting block address within the device to write to
+ * \param[in] Blocks Total number of blocks to read
+ * \param[in] BlockSize Size in bytes of each block within the device
+ * \param[in] BlockBuffer Pointer to where the data to write should be sourced from
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
+ */
+ uint8_t MS_Host_WriteDeviceBlocks(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, const uint8_t LUNIndex,
+ const uint32_t BlockAddress, const uint8_t Blocks, const uint16_t BlockSize,
+ const void* BlockBuffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(6);
+
+ /* Inline Functions: */
+ /** General management task for a given Mass Storage host class interface, required for the correct operation of
+ * the interface. This should be called frequently in the main program loop, before the master USB management task
+ * \ref USB_USBTask().
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state
+ */
+ static inline void MS_Host_USBTask(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo);
+ static inline void MS_Host_USBTask(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo)
+ {
+ (void)MSInterfaceInfo;
+ }
+
+ /* Private Interface - For use in library only: */
+ #if !defined(__DOXYGEN__)
+ /* Macros: */
+ #define MASS_STORE_CLASS 0x08
+ #define MASS_STORE_SUBCLASS 0x06
+ #define MASS_STORE_PROTOCOL 0x50
+
+ #define REQ_MassStorageReset 0xFF
+ #define REQ_GetMaxLUN 0xFE
+
+ #define CBW_SIGNATURE 0x43425355UL
+ #define CSW_SIGNATURE 0x53425355UL
+
+ #define COMMAND_DIRECTION_DATA_OUT (0 << 7)
+ #define COMMAND_DIRECTION_DATA_IN (1 << 7)
+
+ #define COMMAND_DATA_TIMEOUT_MS 10000
+
+ #define MS_FOUND_DATAPIPE_IN (1 << 0)
+ #define MS_FOUND_DATAPIPE_OUT (1 << 1)
+
+ /* Function Prototypes: */
+ #if defined(__INCLUDE_FROM_MS_CLASS_HOST_C)
+ static uint8_t DComp_NextMSInterface(void* const CurrentDescriptor);
+ static uint8_t DComp_NextMSInterfaceEndpoint(void* const CurrentDescriptor);
+
+ static uint8_t MS_Host_SendCommand(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
+ MS_CommandBlockWrapper_t* const SCSICommandBlock,
+ const void* const BufferPtr);
+ static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo);
+ static uint8_t MS_Host_SendReceiveData(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
+ MS_CommandBlockWrapper_t* const SCSICommandBlock, void* BufferPtr);
+ static uint8_t MS_Host_GetReturnedStatus(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
+ MS_CommandStatusWrapper_t* const SCSICommandStatus);
+ #endif
+ #endif
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
+
+/** @} */
projects / pub / USBasp.git / blobdiff