-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2010.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this \r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in \r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting \r
- documentation, and that the name of the author not be used in \r
- advertising or publicity pertaining to distribution of the \r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- * \brief Device mode driver for the library USB CDC Class driver.\r
- *\r
- * Device mode driver for the library USB CDC Class driver.\r
- *\r
- * \note This file should not be included directly. It is automatically included as needed by the class driver\r
- * dispatch header located in LUFA/Drivers/USB/Class/CDC.h.\r
- */\r
-\r
-/** \ingroup Group_USBClassCDC\r
- * @defgroup Group_USBClassCDCDevice CDC Class Device Mode Driver\r
- *\r
- * \section Sec_Dependencies Module Source Dependencies\r
- * The following files must be built with any user project that uses this module:\r
- * - LUFA/Drivers/USB/Class/Device/CDC.c\r
- *\r
- * \section Module Description\r
- * Device Mode USB Class driver framework interface, for the CDC USB Class driver.\r
- *\r
- * \note There are several major drawbacks to the CDC-ACM standard USB class, however\r
- * it is very standardized and thus usually available as a built-in driver on\r
- * most platforms, and so is a better choice than a proprietary serial class.\r
- * \r
- * One major issue with CDC-ACM is that it requires two Interface descriptors,\r
- * which will upset most hosts when part of a multi-function "Composite" USB\r
- * device, as each interface will be loaded into a separate driver instance. To\r
- * conbat this, you should use the "Interface Association Descriptor" addendum to\r
- * the USB standard which is available on most OSes when creating Composite devices.\r
- *\r
- * Another major oversight is that there is no mechanism for the host to notify the\r
- * device that there is a data sink on the host side ready to accept data. This\r
- * means that the device may try to send data while the host isn't listening, causing\r
- * lengthy blocking timeouts in the transmission routines. To combat this, it is\r
- * recommended that the virtual serial line DTR (Data Terminal Ready) be used where\r
- * possible to determine if a host application is ready for data.\r
- *\r
- * @{\r
- */\r
- \r
-#ifndef _CDC_CLASS_DEVICE_H_\r
-#define _CDC_CLASS_DEVICE_H_\r
-\r
- /* Includes: */\r
- #include "../../USB.h"\r
- #include "../Common/CDC.h"\r
-\r
- #include <stdio.h>\r
- #include <string.h>\r
-\r
- /* Enable C linkage for C++ Compilers: */\r
- #if defined(__cplusplus)\r
- extern "C" {\r
- #endif\r
-\r
- /* Preprocessor Checks: */\r
- #if !defined(__INCLUDE_FROM_CDC_DRIVER)\r
- #error Do not include this file directly. Include LUFA/Drivers/Class/CDC.h instead.\r
- #endif\r
- \r
- /* Public Interface - May be used in end-application: */\r
- /* Type Defines: */\r
- /** \brief CDC Class Device Mode Configuration and State Structure.\r
- *\r
- * Class state structure. An instance of this structure should be made for each CDC interface\r
- * within the user application, and passed to each of the CDC class driver functions as the\r
- * CDCInterfaceInfo parameter. This stores each CDC interface's configuration and state information.\r
- */\r
- typedef struct\r
- {\r
- const struct\r
- {\r
- uint8_t ControlInterfaceNumber; /**< Interface number of the CDC control interface within the device */\r
-\r
- uint8_t DataINEndpointNumber; /**< Endpoint number of the CDC interface's IN data endpoint */\r
- uint16_t DataINEndpointSize; /**< Size in bytes of the CDC interface's IN data endpoint */\r
- bool DataINEndpointDoubleBank; /** Indicates if the CDC interface's IN data endpoint should use double banking */\r
-\r
- uint8_t DataOUTEndpointNumber; /**< Endpoint number of the CDC interface's OUT data endpoint */\r
- uint16_t DataOUTEndpointSize; /**< Size in bytes of the CDC interface's OUT data endpoint */\r
- bool DataOUTEndpointDoubleBank; /** Indicates if the CDC interface's OUT data endpoint should use double banking */\r
-\r
- uint8_t NotificationEndpointNumber; /**< Endpoint number of the CDC interface's IN notification endpoint, if used */\r
- uint16_t NotificationEndpointSize; /**< Size in bytes of the CDC interface's IN notification endpoint, if used */\r
- bool NotificationEndpointDoubleBank; /** Indicates if the CDC interface's notification endpoint should use double banking */\r
- } Config; /**< Config data for the USB class interface within the device. All elements in this section\r
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.\r
- */\r
- struct\r
- {\r
- struct\r
- {\r
- uint8_t HostToDevice; /**< Control line states from the host to device, as a set of CDC_CONTROL_LINE_OUT_*\r
- * masks. This value is updated each time \ref CDC_Device_USBTask() is called.\r
- */\r
- uint8_t DeviceToHost; /**< Control line states from the device to host, as a set of CDC_CONTROL_LINE_IN_*\r
- * masks - to notify the host of changes to these values, call the\r
- * \ref CDC_Device_SendControlLineStateChange() function.\r
- */\r
- } ControlLineStates; /**< Current states of the virtual serial port's control lines between the device and host. */\r
-\r
- struct\r
- {\r
- uint32_t BaudRateBPS; /**< Baud rate of the virtual serial port, in bits per second */\r
- uint8_t CharFormat; /**< Character format of the virtual serial port, a value from the\r
- * CDCDevice_CDC_LineCodingFormats_t enum\r
- */\r
- uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the\r
- * CDCDevice_LineCodingParity_t enum\r
- */\r
- uint8_t DataBits; /**< Bits of data per character of the virtual serial port */\r
- } LineEncoding; /** Line encoding used in the virtual serial port, for the device's information. This is generally\r
- * only used if the virtual serial port data is to be reconstructed on a physical UART.\r
- */ \r
- } State; /**< State data for the USB class interface within the device. All elements in this section\r
- * are reset to their defaults when the interface is enumerated.\r
- */\r
- } USB_ClassInfo_CDC_Device_t;\r
- \r
- /* Function Prototypes: */ \r
- /** Configures the endpoints of a given CDC interface, ready for use. This should be linked to the library\r
- * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration containing\r
- * the given CDC interface is selected.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- *\r
- * \return Boolean true if the endpoints were successfully configured, false otherwise\r
- */\r
- bool CDC_Device_ConfigureEndpoints(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** Processes incoming control requests from the host, that are directed to the given CDC class interface. This should be\r
- * linked to the library \ref EVENT_USB_Device_UnhandledControlRequest() event.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- */\r
- void CDC_Device_ProcessControlRequest(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** General management task for a given CDC class interface, required for the correct operation of the interface. This should\r
- * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- */\r
- void CDC_Device_USBTask(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** CDC class driver event for a line encoding change on a CDC interface. This event fires each time the host requests a\r
- * line encoding change (containing the serial parity, baud and other configuration information) and may be hooked in the\r
- * user program by declaring a handler function with the same name and parameters listed here. The new line encoding\r
- * settings are available in the LineEncoding structure inside the CDC interface structure passed as a parameter.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- */\r
- void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
- \r
- /** CDC class driver event for a control line state change on a CDC interface. This event fires each time the host requests a\r
- * control line state change (containing the virtual serial control line states, such as DTR) and may be hooked in the\r
- * user program by declaring a handler function with the same name and parameters listed here. The new control line states\r
- * are available in the ControlLineStates.HostToDevice value inside the CDC interface structure passed as a parameter, set as\r
- * a mask of CDC_CONTROL_LINE_OUT_* masks.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- */\r
- void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** CDC class driver event for a send break request sent to the device from the host. This is generally used to seperate\r
- * data or to indicate a special condition to the receiving device.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- * \param[in] Duration Duration of the break that has been sent by the host, in milliseconds\r
- */\r
- void EVENT_CDC_Device_BreakSent(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, uint8_t Duration) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** Sends a given string to the attached USB host, if connected. If a host is not connected when the function is called, the\r
- * string is discarded. Bytes will be queued for transmission to the host until either the endpoint bank becomes full, or the\r
- * \ref CDC_Device_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be \r
- * packed into a single endpoint packet, increasing data throughput.\r
- *\r
- * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or\r
- * the call will fail.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- * \param[in] Data Pointer to the string to send to the host\r
- * \param[in] Length Size in bytes of the string to send to the host\r
- *\r
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum\r
- */\r
- uint8_t CDC_Device_SendString(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, char* const Data, const uint16_t Length)\r
- ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);\r
- \r
- /** Sends a given byte to the attached USB host, if connected. If a host is not connected when the function is called, the\r
- * byte is discarded. Bytes will be queued for transmission to the host until either the endpoint bank becomes full, or the\r
- * \ref CDC_Device_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be \r
- * packed into a single endpoint packet, increasing data throughput.\r
- *\r
- * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or\r
- * the call will fail.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- * \param[in] Data Byte of data to send to the host\r
- *\r
- * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum\r
- */\r
- uint8_t CDC_Device_SendByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);\r
- \r
- /** Determines the number of bytes received by the CDC interface from the host, waiting to be read.\r
- *\r
- * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or\r
- * the call will fail.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- *\r
- * \return Total number of buffered bytes received from the host\r
- */\r
- uint16_t CDC_Device_BytesReceived(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
- \r
- /** Reads a byte of data from the host. If no data is waiting to be read of if a USB host is not connected, the function\r
- * returns 0. The \ref CDC_Device_BytesReceived() function should be queried before data is received to ensure that no data\r
- * underflow occurs.\r
- *\r
- * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or\r
- * the call will fail.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- *\r
- * \return Next received byte from the host, or 0 if no data received\r
- */\r
- uint8_t CDC_Device_ReceiveByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
- \r
- /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.\r
- *\r
- * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or\r
- * the call will fail.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- *\r
- * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum\r
- */\r
- uint8_t CDC_Device_Flush(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
- \r
- /** Sends a Serial Control Line State Change notification to the host. This should be called when the virtual serial\r
- * control lines (DCD, DSR, etc.) have changed states, or to give BREAK notifications to the host. Line states persist\r
- * until they are cleared via a second notification. This should be called each time the CDC class driver's \r
- * ControlLineStates.DeviceToHost value is updated to push the new states to the USB host.\r
- *\r
- * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or\r
- * the call will fail.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- */\r
- void CDC_Device_SendControlLineStateChange(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** Creates a standard characer stream for the given CDC Device instance so that it can be used with all the regular\r
- * functions in the avr-libc <stdio.h> library that accept a FILE stream as a destination (e.g. fprintf). The created\r
- * stream is bidirectional and can be used for both input and output functions.\r
- *\r
- * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single\r
- * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may\r
- * be used when the read data is processed byte-per-bye (via getc()) or when the user application will implement its own\r
- * line buffering.\r
- *\r
- * \note The created stream can be given as stdout if desired to direct the standard output from all <stdio.h> functions\r
- * to the given CDC interface.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed\r
- */\r
- void CDC_Device_CreateStream(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo, FILE* Stream);\r
-\r
- /** Identical to CDC_Device_CreateStream(), except that reads are blocking until the calling stream function terminates\r
- * the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications.\r
- *\r
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state\r
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed\r
- */\r
- void CDC_Device_CreateBlockingStream(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo, FILE* Stream);\r
-\r
- /* Private Interface - For use in library only: */\r
- #if !defined(__DOXYGEN__)\r
- /* Function Prototypes: */\r
- #if defined(__INCLUDE_FROM_CDC_CLASS_DEVICE_C)\r
- static int CDC_Device_putchar(char c, FILE* Stream);\r
- static int CDC_Device_getchar(FILE* Stream);\r
- static int CDC_Device_getchar_Blocking(FILE* Stream);\r
- \r
- void CDC_Device_Event_Stub(void);\r
- void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)\r
- ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Device_Event_Stub);\r
- void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)\r
- ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Device_Event_Stub);\r
- void EVENT_CDC_Device_BreakSent(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, uint8_t Duration)\r
- ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Device_Event_Stub);\r
- #endif\r
-\r
- #endif\r
- \r
- /* Disable C linkage for C++ Compilers: */\r
- #if defined(__cplusplus)\r
- }\r
- #endif\r
- \r
-#endif\r
-\r
-/** @} */\r
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Device mode driver for the library USB CDC Class driver.
+ *
+ * Device mode driver for the library USB CDC Class driver.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the class driver
+ * dispatch header located in LUFA/Drivers/USB/Class/CDC.h.
+ */
+
+/** \ingroup Group_USBClassCDC
+ * @defgroup Group_USBClassCDCDevice CDC Class Device Mode Driver
+ *
+ * \section Sec_Dependencies Module Source Dependencies
+ * The following files must be built with any user project that uses this module:
+ * - LUFA/Drivers/USB/Class/Device/CDC.c
+ *
+ * \section Module Description
+ * Device Mode USB Class driver framework interface, for the CDC USB Class driver.
+ *
+ * \note There are several major drawbacks to the CDC-ACM standard USB class, however
+ * it is very standardized and thus usually available as a built-in driver on
+ * most platforms, and so is a better choice than a proprietary serial class.
+ *
+ * One major issue with CDC-ACM is that it requires two Interface descriptors,
+ * which will upset most hosts when part of a multi-function "Composite" USB
+ * device, as each interface will be loaded into a separate driver instance. To
+ * conbat this, you should use the "Interface Association Descriptor" addendum to
+ * the USB standard which is available on most OSes when creating Composite devices.
+ *
+ * Another major oversight is that there is no mechanism for the host to notify the
+ * device that there is a data sink on the host side ready to accept data. This
+ * means that the device may try to send data while the host isn't listening, causing
+ * lengthy blocking timeouts in the transmission routines. To combat this, it is
+ * recommended that the virtual serial line DTR (Data Terminal Ready) be used where
+ * possible to determine if a host application is ready for data.
+ *
+ * @{
+ */
+
+#ifndef _CDC_CLASS_DEVICE_H_
+#define _CDC_CLASS_DEVICE_H_
+
+ /* Includes: */
+ #include "../../USB.h"
+ #include "../Common/CDC.h"
+
+ #include <stdio.h>
+ #include <string.h>
+
+ /* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_CDC_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/Class/CDC.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Type Defines: */
+ /** \brief CDC Class Device Mode Configuration and State Structure.
+ *
+ * Class state structure. An instance of this structure should be made for each CDC interface
+ * within the user application, and passed to each of the CDC class driver functions as the
+ * CDCInterfaceInfo parameter. This stores each CDC interface's configuration and state information.
+ */
+ typedef struct
+ {
+ const struct
+ {
+ uint8_t ControlInterfaceNumber; /**< Interface number of the CDC control interface within the device */
+
+ uint8_t DataINEndpointNumber; /**< Endpoint number of the CDC interface's IN data endpoint */
+ uint16_t DataINEndpointSize; /**< Size in bytes of the CDC interface's IN data endpoint */
+ bool DataINEndpointDoubleBank; /** Indicates if the CDC interface's IN data endpoint should use double banking */
+
+ uint8_t DataOUTEndpointNumber; /**< Endpoint number of the CDC interface's OUT data endpoint */
+ uint16_t DataOUTEndpointSize; /**< Size in bytes of the CDC interface's OUT data endpoint */
+ bool DataOUTEndpointDoubleBank; /** Indicates if the CDC interface's OUT data endpoint should use double banking */
+
+ uint8_t NotificationEndpointNumber; /**< Endpoint number of the CDC interface's IN notification endpoint, if used */
+ uint16_t NotificationEndpointSize; /**< Size in bytes of the CDC interface's IN notification endpoint, if used */
+ bool NotificationEndpointDoubleBank; /** Indicates if the CDC interface's notification endpoint should use double banking */
+ } Config; /**< Config data for the USB class interface within the device. All elements in this section
+ * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
+ */
+ struct
+ {
+ struct
+ {
+ uint8_t HostToDevice; /**< Control line states from the host to device, as a set of CDC_CONTROL_LINE_OUT_*
+ * masks. This value is updated each time \ref CDC_Device_USBTask() is called.
+ */
+ uint8_t DeviceToHost; /**< Control line states from the device to host, as a set of CDC_CONTROL_LINE_IN_*
+ * masks - to notify the host of changes to these values, call the
+ * \ref CDC_Device_SendControlLineStateChange() function.
+ */
+ } ControlLineStates; /**< Current states of the virtual serial port's control lines between the device and host. */
+
+ struct
+ {
+ uint32_t BaudRateBPS; /**< Baud rate of the virtual serial port, in bits per second */
+ uint8_t CharFormat; /**< Character format of the virtual serial port, a value from the
+ * CDCDevice_CDC_LineCodingFormats_t enum
+ */
+ uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the
+ * CDCDevice_LineCodingParity_t enum
+ */
+ uint8_t DataBits; /**< Bits of data per character of the virtual serial port */
+ } LineEncoding; /** Line encoding used in the virtual serial port, for the device's information. This is generally
+ * only used if the virtual serial port data is to be reconstructed on a physical UART.
+ */
+ } State; /**< State data for the USB class interface within the device. All elements in this section
+ * are reset to their defaults when the interface is enumerated.
+ */
+ } USB_ClassInfo_CDC_Device_t;
+
+ /* Function Prototypes: */
+ /** Configures the endpoints of a given CDC interface, ready for use. This should be linked to the library
+ * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration containing
+ * the given CDC interface is selected.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ *
+ * \return Boolean true if the endpoints were successfully configured, false otherwise
+ */
+ bool CDC_Device_ConfigureEndpoints(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Processes incoming control requests from the host, that are directed to the given CDC class interface. This should be
+ * linked to the library \ref EVENT_USB_Device_UnhandledControlRequest() event.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ */
+ void CDC_Device_ProcessControlRequest(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** General management task for a given CDC class interface, required for the correct operation of the interface. This should
+ * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ */
+ void CDC_Device_USBTask(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** CDC class driver event for a line encoding change on a CDC interface. This event fires each time the host requests a
+ * line encoding change (containing the serial parity, baud and other configuration information) and may be hooked in the
+ * user program by declaring a handler function with the same name and parameters listed here. The new line encoding
+ * settings are available in the LineEncoding structure inside the CDC interface structure passed as a parameter.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ */
+ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** CDC class driver event for a control line state change on a CDC interface. This event fires each time the host requests a
+ * control line state change (containing the virtual serial control line states, such as DTR) and may be hooked in the
+ * user program by declaring a handler function with the same name and parameters listed here. The new control line states
+ * are available in the ControlLineStates.HostToDevice value inside the CDC interface structure passed as a parameter, set as
+ * a mask of CDC_CONTROL_LINE_OUT_* masks.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ */
+ void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** CDC class driver event for a send break request sent to the device from the host. This is generally used to seperate
+ * data or to indicate a special condition to the receiving device.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ * \param[in] Duration Duration of the break that has been sent by the host, in milliseconds
+ */
+ void EVENT_CDC_Device_BreakSent(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, uint8_t Duration) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Sends a given string to the attached USB host, if connected. If a host is not connected when the function is called, the
+ * string is discarded. Bytes will be queued for transmission to the host until either the endpoint bank becomes full, or the
+ * \ref CDC_Device_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
+ * packed into a single endpoint packet, increasing data throughput.
+ *
+ * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or
+ * the call will fail.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ * \param[in] Data Pointer to the string to send to the host
+ * \param[in] Length Size in bytes of the string to send to the host
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum
+ */
+ uint8_t CDC_Device_SendString(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, char* const Data, const uint16_t Length)
+ ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
+ /** Sends a given byte to the attached USB host, if connected. If a host is not connected when the function is called, the
+ * byte is discarded. Bytes will be queued for transmission to the host until either the endpoint bank becomes full, or the
+ * \ref CDC_Device_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
+ * packed into a single endpoint packet, increasing data throughput.
+ *
+ * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or
+ * the call will fail.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ * \param[in] Data Byte of data to send to the host
+ *
+ * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum
+ */
+ uint8_t CDC_Device_SendByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Determines the number of bytes received by the CDC interface from the host, waiting to be read.
+ *
+ * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or
+ * the call will fail.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ *
+ * \return Total number of buffered bytes received from the host
+ */
+ uint16_t CDC_Device_BytesReceived(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads a byte of data from the host. If no data is waiting to be read of if a USB host is not connected, the function
+ * returns 0. The \ref CDC_Device_BytesReceived() function should be queried before data is received to ensure that no data
+ * underflow occurs.
+ *
+ * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or
+ * the call will fail.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ *
+ * \return Next received byte from the host, or 0 if no data received
+ */
+ uint8_t CDC_Device_ReceiveByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.
+ *
+ * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or
+ * the call will fail.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ *
+ * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum
+ */
+ uint8_t CDC_Device_Flush(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Sends a Serial Control Line State Change notification to the host. This should be called when the virtual serial
+ * control lines (DCD, DSR, etc.) have changed states, or to give BREAK notifications to the host. Line states persist
+ * until they are cleared via a second notification. This should be called each time the CDC class driver's
+ * ControlLineStates.DeviceToHost value is updated to push the new states to the USB host.
+ *
+ * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or
+ * the call will fail.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ */
+ void CDC_Device_SendControlLineStateChange(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Creates a standard characer stream for the given CDC Device instance so that it can be used with all the regular
+ * functions in the avr-libc <stdio.h> library that accept a FILE stream as a destination (e.g. fprintf). The created
+ * stream is bidirectional and can be used for both input and output functions.
+ *
+ * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single
+ * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may
+ * be used when the read data is processed byte-per-bye (via getc()) or when the user application will implement its own
+ * line buffering.
+ *
+ * \note The created stream can be given as stdout if desired to direct the standard output from all <stdio.h> functions
+ * to the given CDC interface.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
+ */
+ void CDC_Device_CreateStream(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo, FILE* Stream);
+
+ /** Identical to CDC_Device_CreateStream(), except that reads are blocking until the calling stream function terminates
+ * the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
+ * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
+ */
+ void CDC_Device_CreateBlockingStream(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo, FILE* Stream);
+
+ /* Private Interface - For use in library only: */
+ #if !defined(__DOXYGEN__)
+ /* Function Prototypes: */
+ #if defined(__INCLUDE_FROM_CDC_CLASS_DEVICE_C)
+ static int CDC_Device_putchar(char c, FILE* Stream);
+ static int CDC_Device_getchar(FILE* Stream);
+ static int CDC_Device_getchar_Blocking(FILE* Stream);
+
+ void CDC_Device_Event_Stub(void);
+ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
+ ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Device_Event_Stub);
+ void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
+ ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Device_Event_Stub);
+ void EVENT_CDC_Device_BreakSent(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, uint8_t Duration)
+ ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Device_Event_Stub);
+ #endif
+
+ #endif
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
+
+/** @} */
projects / pub / USBasp.git / blobdiff