-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2010.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this \r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in \r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting \r
- documentation, and that the name of the author not be used in \r
- advertising or publicity pertaining to distribution of the \r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/*\r
- This is a stub driver header file, for implementing custom board\r
- layout hardware with compatible LUFA board specific drivers. If\r
- the library is configured to use the BOARD_USER board mode, this\r
- driver file should be completed and copied into the "/Board/" folder\r
- inside the application's folder.\r
-\r
- This stub is for the board-specific component of the LUFA LEDs driver,\r
- for the LEDs (up to four) mounted on most USB AVR boards.\r
-*/\r
-\r
-#ifndef __LEDS_USER_H__\r
-#define __LEDS_USER_H__\r
-\r
- /* Includes: */\r
- #include <avr/io.h>\r
-\r
- // TODO: Add any required includes here\r
-\r
-/* Enable C linkage for C++ Compilers: */\r
- #if defined(__cplusplus)\r
- extern "C" {\r
- #endif\r
-\r
- /* Preprocessor Checks: */\r
- #if !defined(__INCLUDE_FROM_LEDS_H)\r
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.\r
- #endif\r
-\r
- /* Public Interface - May be used in end-application: */\r
- /* Macros: */\r
- /** LED mask for the first LED on the board. */\r
- #define LEDS_LED1 // TODO: Add mask for first board LED here\r
-\r
- /** LED mask for the second LED on the board. */\r
- #define LEDS_LED2 // TODO: Add mask for second board LED here\r
-\r
- /** LED mask for the third LED on the board. */\r
- #define LEDS_LED3 // TODO: Add mask for third board LED here\r
-\r
- /** LED mask for the fourth LED on the board. */\r
- #define LEDS_LED4 // TODO: Add mask for fourth board LED here\r
-\r
- /** LED mask for all the LEDs on the board. */\r
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)\r
-\r
- /** LED mask for the none of the board LEDs */\r
- #define LEDS_NO_LEDS 0\r
-\r
- /* Inline Functions: */\r
- #if !defined(__DOXYGEN__)\r
- static inline void LEDs_Init(void)\r
- {\r
- // TODO: Add code to initialize LED port pins as outputs here\r
- }\r
- \r
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)\r
- {\r
- // TODO: Add code to turn on LEDs given in the LEDMask mask here, leave others as-is\r
- }\r
-\r
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)\r
- {\r
- // TODO: Add code to turn off LEDs given in the LEDMask mask here, leave others as-is\r
- }\r
-\r
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)\r
- {\r
- // TODO: Add code to turn on only LEDs given in the LEDMask mask here, all others off\r
- }\r
- \r
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask)\r
- {\r
- // TODO: Add code to set the Leds in the given LEDMask to the status given in ActiveMask here\r
- }\r
-\r
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)\r
- {\r
- // TODO: Add code to toggle the Leds in the given LEDMask, ignoring all others\r
- }\r
- \r
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;\r
- static inline uint8_t LEDs_GetLEDs(void)\r
- {\r
- // TODO: Add code to return the current LEDs status' here which can be masked against LED_LED* macros\r
- }\r
- #endif\r
-\r
- /* Disable C linkage for C++ Compilers: */\r
- #if defined(__cplusplus)\r
- }\r
- #endif\r
- \r
-#endif\r
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/*
+ This is a stub driver header file, for implementing custom board
+ layout hardware with compatible LUFA board specific drivers. If
+ the library is configured to use the BOARD_USER board mode, this
+ driver file should be completed and copied into the "/Board/" folder
+ inside the application's folder.
+
+ This stub is for the board-specific component of the LUFA LEDs driver,
+ for the LEDs (up to four) mounted on most USB AVR boards.
+*/
+
+#ifndef __LEDS_USER_H__
+#define __LEDS_USER_H__
+
+ /* Includes: */
+ #include <avr/io.h>
+
+ // TODO: Add any required includes here
+
+/* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_LEDS_H)
+ #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Macros: */
+ /** LED mask for the first LED on the board. */
+ #define LEDS_LED1 // TODO: Add mask for first board LED here
+
+ /** LED mask for the second LED on the board. */
+ #define LEDS_LED2 // TODO: Add mask for second board LED here
+
+ /** LED mask for the third LED on the board. */
+ #define LEDS_LED3 // TODO: Add mask for third board LED here
+
+ /** LED mask for the fourth LED on the board. */
+ #define LEDS_LED4 // TODO: Add mask for fourth board LED here
+
+ /** LED mask for all the LEDs on the board. */
+ #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
+
+ /** LED mask for the none of the board LEDs */
+ #define LEDS_NO_LEDS 0
+
+ /* Inline Functions: */
+ #if !defined(__DOXYGEN__)
+ static inline void LEDs_Init(void)
+ {
+ // TODO: Add code to initialize LED port pins as outputs here
+ }
+
+ static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
+ {
+ // TODO: Add code to turn on LEDs given in the LEDMask mask here, leave others as-is
+ }
+
+ static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
+ {
+ // TODO: Add code to turn off LEDs given in the LEDMask mask here, leave others as-is
+ }
+
+ static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
+ {
+ // TODO: Add code to turn on only LEDs given in the LEDMask mask here, all others off
+ }
+
+ static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask)
+ {
+ // TODO: Add code to set the Leds in the given LEDMask to the status given in ActiveMask here
+ }
+
+ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
+ {
+ // TODO: Add code to toggle the Leds in the given LEDMask, ignoring all others
+ }
+
+ static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint8_t LEDs_GetLEDs(void)
+ {
+ // TODO: Add code to return the current LEDs status' here which can be masked against LED_LED* macros
+ }
+ #endif
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
projects / pub / USBasp.git / blobdiff