-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2010.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this \r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in \r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting \r
- documentation, and that the name of the author not be used in \r
- advertising or publicity pertaining to distribution of the \r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- *\r
- * Main source file for the Audio Input demo. This file contains the main tasks of the demo and\r
- * is responsible for the initial application hardware configuration.\r
- */\r
-\r
-#include "AudioInput.h"\r
-\r
-/** Flag to indicate if the streaming audio alternative interface has been selected by the host. */\r
-bool StreamingAudioInterfaceSelected = false;\r
-\r
-/** Main program entry point. This routine contains the overall program flow, including initial\r
- * setup of all components and the main program loop.\r
- */\r
-int main(void)\r
-{\r
- SetupHardware();\r
-\r
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
- sei();\r
- \r
- for (;;)\r
- {\r
- USB_Audio_Task();\r
- USB_USBTask();\r
- }\r
-}\r
-\r
-/** Configures the board hardware and chip peripherals for the demo's functionality. */\r
-void SetupHardware(void)\r
-{\r
- /* Disable watchdog if enabled by bootloader/fuses */\r
- MCUSR &= ~(1 << WDRF);\r
- wdt_disable();\r
-\r
- /* Disable clock division */\r
- clock_prescale_set(clock_div_1);\r
- \r
- /* Hardware Initialization */\r
- LEDs_Init();\r
- ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);\r
- ADC_SetupChannel(MIC_IN_ADC_CHANNEL);\r
- USB_Init();\r
- \r
- /* Start the ADC conversion in free running mode */\r
- ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK);\r
-}\r
-\r
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and\r
- * configures the sample update and PWM timers.\r
- */\r
-void EVENT_USB_Device_Connect(void)\r
-{\r
- /* Indicate USB enumerating */\r
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
-\r
- /* Sample reload timer initialization */\r
- OCR0A = (F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1;\r
- TCCR0A = (1 << WGM01); // CTC mode\r
- TCCR0B = (1 << CS01); // Fcpu/8 speed\r
-}\r
-\r
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
- * the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.\r
- */\r
-void EVENT_USB_Device_Disconnect(void)\r
-{\r
- /* Stop the sample reload timer */\r
- TCCR0B = 0;\r
-\r
- /* Indicate streaming audio interface not selected */\r
- StreamingAudioInterfaceSelected = false;\r
-\r
- /* Indicate USB not ready */\r
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
-}\r
-\r
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration\r
- * of the USB device after enumeration - the device endpoints are configured.\r
- */\r
-void EVENT_USB_Device_ConfigurationChanged(void)\r
-{\r
- /* Indicate USB connected and ready */\r
- LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
-\r
- /* Setup audio stream endpoint */\r
- if (!(Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS,\r
- ENDPOINT_DIR_IN, AUDIO_STREAM_EPSIZE,\r
- ENDPOINT_BANK_DOUBLE)))\r
- {\r
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
- }\r
-}\r
-\r
-/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific\r
- * control requests that are not handled internally by the USB library (including the Audio class-specific\r
- * requests) so that they can be handled appropriately for the application.\r
- */\r
-void EVENT_USB_Device_UnhandledControlRequest(void)\r
-{\r
- /* Process General and Audio specific control requests */\r
- switch (USB_ControlRequest.bRequest)\r
- {\r
- case REQ_SetInterface:\r
- /* Set Interface is not handled by the library, as its function is application-specific */\r
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE))\r
- {\r
- Endpoint_ClearSETUP();\r
- \r
- /* Check if the host is enabling the audio interface (setting AlternateSetting to 1) */\r
- StreamingAudioInterfaceSelected = ((USB_ControlRequest.wValue) != 0);\r
- \r
- Endpoint_ClearStatusStage();\r
- }\r
-\r
- break;\r
- }\r
-}\r
-\r
-/** Task to manage the Audio interface, reading in ADC samples from the microphone, and them to the host. */\r
-void USB_Audio_Task(void)\r
-{\r
- /* Device must be connected and configured for the task to run */\r
- if (USB_DeviceState != DEVICE_STATE_Configured)\r
- return;\r
-\r
- /* Check to see if the streaming interface is selected, if not the host is not receiving audio */\r
- if (!(StreamingAudioInterfaceSelected))\r
- return;\r
-\r
- /* Select the audio stream endpoint */\r
- Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM);\r
- \r
- /* Check if the current endpoint can be written to and that the next sample should be stored */\r
- if (Endpoint_IsINReady() && (TIFR0 & (1 << OCF0A)))\r
- {\r
- /* Clear the sample reload timer */\r
- TIFR0 |= (1 << OCF0A);\r
-\r
- /* Audio sample is ADC value scaled to fit the entire range */\r
- int16_t AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());\r
- \r
- #if defined(MICROPHONE_BIASED_TO_HALF_RAIL)\r
- /* Microphone is biased to half rail voltage, subtract the bias from the sample value */\r
- AudioSample -= (SAMPLE_MAX_RANGE / 2);\r
- #endif\r
-\r
- /* Write the sample to the buffer */\r
- Endpoint_Write_Word_LE(AudioSample);\r
-\r
- /* Check to see if the bank is now full */\r
- if (!(Endpoint_IsReadWriteAllowed()))\r
- {\r
- /* Send the full packet to the host */\r
- Endpoint_ClearIN();\r
- }\r
- }\r
-}\r
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Main source file for the Audio Input demo. This file contains the main tasks of the demo and
+ * is responsible for the initial application hardware configuration.
+ */
+
+#include "AudioInput.h"
+
+/** Flag to indicate if the streaming audio alternative interface has been selected by the host. */
+bool StreamingAudioInterfaceSelected = false;
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ * setup of all components and the main program loop.
+ */
+int main(void)
+{
+ SetupHardware();
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+ sei();
+
+ for (;;)
+ {
+ USB_Audio_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+ /* Disable watchdog if enabled by bootloader/fuses */
+ MCUSR &= ~(1 << WDRF);
+ wdt_disable();
+
+ /* Disable clock division */
+ clock_prescale_set(clock_div_1);
+
+ /* Hardware Initialization */
+ LEDs_Init();
+ ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
+ ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
+ USB_Init();
+
+ /* Start the ADC conversion in free running mode */
+ ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK);
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
+ * configures the sample update and PWM timers.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+ /* Indicate USB enumerating */
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+ /* Sample reload timer initialization */
+ OCR0A = (F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1;
+ TCCR0A = (1 << WGM01); // CTC mode
+ TCCR0B = (1 << CS01); // Fcpu/8 speed
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ * the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+ /* Stop the sample reload timer */
+ TCCR0B = 0;
+
+ /* Indicate streaming audio interface not selected */
+ StreamingAudioInterfaceSelected = false;
+
+ /* Indicate USB not ready */
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ * of the USB device after enumeration - the device endpoints are configured.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+ /* Indicate USB connected and ready */
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
+
+ /* Setup audio stream endpoint */
+ if (!(Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS,
+ ENDPOINT_DIR_IN, AUDIO_STREAM_EPSIZE,
+ ENDPOINT_BANK_DOUBLE)))
+ {
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ }
+}
+
+/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific
+ * control requests that are not handled internally by the USB library (including the Audio class-specific
+ * requests) so that they can be handled appropriately for the application.
+ */
+void EVENT_USB_Device_UnhandledControlRequest(void)
+{
+ /* Process General and Audio specific control requests */
+ switch (USB_ControlRequest.bRequest)
+ {
+ case REQ_SetInterface:
+ /* Set Interface is not handled by the library, as its function is application-specific */
+ if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE))
+ {
+ Endpoint_ClearSETUP();
+
+ /* Check if the host is enabling the audio interface (setting AlternateSetting to 1) */
+ StreamingAudioInterfaceSelected = ((USB_ControlRequest.wValue) != 0);
+
+ Endpoint_ClearStatusStage();
+ }
+
+ break;
+ }
+}
+
+/** Task to manage the Audio interface, reading in ADC samples from the microphone, and them to the host. */
+void USB_Audio_Task(void)
+{
+ /* Device must be connected and configured for the task to run */
+ if (USB_DeviceState != DEVICE_STATE_Configured)
+ return;
+
+ /* Check to see if the streaming interface is selected, if not the host is not receiving audio */
+ if (!(StreamingAudioInterfaceSelected))
+ return;
+
+ /* Select the audio stream endpoint */
+ Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM);
+
+ /* Check if the current endpoint can be written to and that the next sample should be stored */
+ if (Endpoint_IsINReady() && (TIFR0 & (1 << OCF0A)))
+ {
+ /* Clear the sample reload timer */
+ TIFR0 |= (1 << OCF0A);
+
+ /* Audio sample is ADC value scaled to fit the entire range */
+ int16_t AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
+
+ #if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
+ /* Microphone is biased to half rail voltage, subtract the bias from the sample value */
+ AudioSample -= (SAMPLE_MAX_RANGE / 2);
+ #endif
+
+ /* Write the sample to the buffer */
+ Endpoint_Write_Word_LE(AudioSample);
+
+ /* Check to see if the bank is now full */
+ if (!(Endpoint_IsReadWriteAllowed()))
+ {
+ /* Send the full packet to the host */
+ Endpoint_ClearIN();
+ }
+ }
+}
projects / pub / USBasp.git / blobdiff