Oops: Really disable building of Projects/Host/ClassDriver directory in the Projects...

[pub/USBasp.git] / Demos / Device / LowLevel / Keyboard / Keyboard.c

diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.c b/Demos/Device/LowLevel/Keyboard/Keyboard.c
index e27b228..02f61a5 100644 (file)
--- a/Demos/Device/LowLevel/Keyboard/Keyboard.c
+++ b/Demos/Device/LowLevel/Keyboard/Keyboard.c
@@ -85,18 +85,12 @@ void SetupHardware(void)
        Joystick_Init();\r
        LEDs_Init();\r
        USB_Init();\r
-       \r
-       /* Millisecond timer initialization, with output compare interrupt enabled for the idle timing */\r
-       OCR0A  = 0x7D;\r
-       TCCR0A = (1 << WGM01);\r
-       TCCR0B = ((1 << CS01) | (1 << CS00));\r
-       TIMSK0 = (1 << OCIE0A);\r
 }\r
 \r
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r
-void EVENT_USB_Connect(void)\r
+void EVENT_USB_Device_Connect(void)\r
 {\r
        /* Indicate USB enumerating */\r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
@@ -108,7 +102,7 @@ void EVENT_USB_Connect(void)
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs.\r
  */\r
-void EVENT_USB_Disconnect(void)\r
+void EVENT_USB_Device_Disconnect(void)\r
 {\r
        /* Indicate USB not ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
@@ -117,7 +111,7 @@ void EVENT_USB_Disconnect(void)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration\r
  *  of the USB device after enumeration, and configures the keyboard device endpoints.\r
  */\r
-void EVENT_USB_ConfigurationChanged(void)\r
+void EVENT_USB_Device_ConfigurationChanged(void)\r
 {      \r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
@@ -137,13 +131,15 @@ void EVENT_USB_ConfigurationChanged(void)
        {\r
                LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
        }\r
+       \r
+       USB_Device_EnableSOFEvents();\r
 }\r
 \r
-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific\r
+/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific\r
  *  control requests that are not handled internally by the USB library (including the HID commands, which are\r
  *  all issued via the control endpoint), so that they can be handled appropriately for the application.\r
  */\r
-void EVENT_USB_UnhandledControlPacket(void)\r
+void EVENT_USB_Device_UnhandledControlRequest(void)\r
 {\r
        /* Handle HID Class specific requests */\r
        switch (USB_ControlRequest.bRequest)\r
@@ -248,10 +244,8 @@ void EVENT_USB_UnhandledControlPacket(void)
        }\r
 }\r
 \r
-/** ISR for the timer 0 compare vector. This ISR fires once each millisecond, and increments the\r
- *  scheduler elapsed idle period counter when the host has set an idle period.\r
- */\r
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)\r
+/** Event handler for the USB device Start Of Frame event. */\r
+void EVENT_USB_Device_StartOfFrame(void)\r
 {\r
        /* One millisecond has elapsed, decrement the idle time remaining counter if it has not already elapsed */\r
        if (IdleMSRemaining)\r