Fixed broken DFU bootloader, added XPLAIN support for bootloader start when XCK jumpe...

[pub/USBasp.git] / LUFA / Drivers / Board / LEDs.h

diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index 0aebbde..a898be2 100644 (file)
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -1,21 +1,21 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
+           www.lufa-lib.org
 */
 
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -39,6 +39,8 @@
  *
  *  If the BOARD value is set to BOARD_USER, this will include the /Board/LEDs.h file in the user project
  *  directory.
+ *
+ *  For possible BOARD makefile values, see \ref Group_BoardTypes.
  */
 
 /** \ingroup Group_BoardDrivers
@@ -56,9 +58,11 @@
  *  directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value
  *  is set to BOARD_NONE, this driver is silently disabled.
  *
+ *  For possible BOARD makefile values, see \ref Group_BoardTypes.
+ *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- *        If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D 
+ *        If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D
  *        switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
  *        a non-existing LED is referenced in application code. Note that this means that it is possible to make
  *        compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
@@ -75,7 +79,7 @@
                #define __INCLUDE_FROM_LEDS_H
                #define INCLUDE_FROM_LEDS_H
        #endif
-       
+
        /* Includes: */
        #include "../../Common/Common.h"
 
@@ -111,10 +115,32 @@
                #include "BENITO/LEDs.h"
        #elif (BOARD == BOARD_JMDBU2)
                #include "JMDBU2/LEDs.h"
+       #elif (BOARD == BOARD_OLIMEX162)
+               #include "OLIMEX162/LEDs.h"
+       #elif (BOARD == BOARD_USBFOO)
+               #include "USBFOO/LEDs.h"
+       #elif (BOARD == BOARD_UDIP)
+               #include "UDIP/LEDs.h"
+       #elif (BOARD == BOARD_BUI)
+               #include "BUI/LEDs.h"
+       #elif (BOARD == BOARD_UNO)
+               #include "UNO/LEDs.h"
+       #elif (BOARD == BOARD_CULV3)
+               #include "CULV3/LEDs.h"
+       #elif (BOARD == BOARD_BLACKCAT)
+               #include "BLACKCAT/LEDs.h"
+       #elif (BOARD == BOARD_MAXIMUS)
+               #include "MAXIMUS/LEDs.h"
+       #elif (BOARD == BOARD_MINIMUS)
+               #include "MINIMUS/LEDs.h"
+       #elif (BOARD == BOARD_ADAFRUITU4)
+               #include "ADAFRUITU4/LEDs.h"
+       #elif (BOARD == BOARD_MICROSIN162)
+               #include "MICROSIN162/LEDs.h"
        #elif (BOARD == BOARD_USER)
                #include "Board/LEDs.h"
        #endif
-       
+
        #if !defined(LEDS_LED1)
                #define LEDS_LED1      0
        #endif
@@ -130,10 +156,10 @@
        #if !defined(LEDS_LED4)
                #define LEDS_LED4      0
        #endif
-       
+
        /* Pseudo-Functions for Doxygen: */
        #if defined(__DOXYGEN__)
-               /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
+               /** Initialises the board LED driver so that the LEDs can be controlled. This sets the appropriate port
                 *  I/O pins as outputs, and sets the LEDs to default to off.
                 */
                static inline void LEDs_Init(void);
@@ -163,8 +189,9 @@
                 *  \param[in] LEDMask     Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
                 *  \param[in] ActiveMask  Mask of whether the LEDs in the LED mask should be turned on or off.
                 */
-               static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask);
-               
+               static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
+                                                  const uint8_t ActiveMask);
+
                /** Toggles all LEDs in the LED mask, leaving all others in their current states.
                 *
                 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
@@ -182,3 +209,4 @@
 #endif
 
 /** @} */
+