/*
LUFA Library
- Copyright (C) Dean Camera, 2011.
+ Copyright (C) Dean Camera, 2012.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
- Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
* Hardware LEDs driver. This provides an easy to use driver for the hardware LEDs present on many boards. It
* provides an interface to configure, test and change the status of all the board LEDs.
*
- * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Dataflash.h file in the user project
+ * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/LEDs.h file in the user project
* directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value
* is set to \c BOARD_NONE, this driver is silently disabled.
*
*
* \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
* a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- * If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D
+ * If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D
* switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
* a non-existing LED is referenced in application code. Note that this means that it is possible to make
* compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
* application.
*
* \code
- * // Initialise the board LED driver before first use
+ * // Initialize the board LED driver before first use
* LEDs_Init();
- *
+ *
* // Turn on each of the four LEDs in turn
- * LEDs_SetAllLEDs(LEDS_LED1);
+ * LEDs_SetAllLEDs(LEDS_LED1);
* Delay_MS(500);
- * LEDs_SetAllLEDs(LEDS_LED1);
+ * LEDs_SetAllLEDs(LEDS_LED2);
* Delay_MS(500);
- * LEDs_SetAllLEDs(LEDS_LED1);
+ * LEDs_SetAllLEDs(LEDS_LED3);
* Delay_MS(500);
- * LEDs_SetAllLEDs(LEDS_LED1);
+ * LEDs_SetAllLEDs(LEDS_LED4);
* Delay_MS(500);
- *
+ *
* // Turn on all LEDs
* LEDs_SetAllLEDs(LEDS_ALL_LEDS);
* Delay_MS(1000);
- *
+ *
* // Turn on LED 1, turn off LED 2, leaving LEDs 3 and 4 in their current state
* LEDs_ChangeLEDs((LEDS_LED1 | LEDS_LED2), LEDS_LED1);
* \endcode
#define __INCLUDE_FROM_LEDS_H
/* Includes: */
- #include "../../Common/Common.h"
-
- #if (BOARD == BOARD_NONE)
- static inline void LEDs_Init(void) {};
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) {};
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) {};
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) {};
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) {};
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) {};
- static inline uint8_t LEDs_GetLEDs(void) { return 0; }
- #elif (BOARD == BOARD_USBKEY)
- #include "USBKEY/LEDs.h"
- #elif (BOARD == BOARD_STK525)
- #include "STK525/LEDs.h"
- #elif (BOARD == BOARD_STK526)
- #include "STK526/LEDs.h"
- #elif (BOARD == BOARD_RZUSBSTICK)
- #include "RZUSBSTICK/LEDs.h"
- #elif (BOARD == BOARD_ATAVRUSBRF01)
- #include "ATAVRUSBRF01/LEDs.h"
- #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
- #include "XPLAIN/LEDs.h"
- #elif (BOARD == BOARD_BUMBLEB)
- #include "BUMBLEB/LEDs.h"
- #elif (BOARD == BOARD_EVK527)
- #include "EVK527/LEDs.h"
- #elif (BOARD == BOARD_TEENSY)
- #include "TEENSY/LEDs.h"
- #elif (BOARD == BOARD_USBTINYMKII)
- #include "USBTINYMKII/LEDs.h"
- #elif (BOARD == BOARD_BENITO)
- #include "BENITO/LEDs.h"
- #elif (BOARD == BOARD_JMDBU2)
- #include "JMDBU2/LEDs.h"
- #elif (BOARD == BOARD_OLIMEX162)
- #include "OLIMEX162/LEDs.h"
- #elif (BOARD == BOARD_USBFOO)
- #include "USBFOO/LEDs.h"
- #elif (BOARD == BOARD_UDIP)
- #include "UDIP/LEDs.h"
- #elif (BOARD == BOARD_BUI)
- #include "BUI/LEDs.h"
- #elif (BOARD == BOARD_UNO)
- #include "UNO/LEDs.h"
- #elif (BOARD == BOARD_CULV3)
- #include "CULV3/LEDs.h"
- #elif (BOARD == BOARD_BLACKCAT)
- #include "BLACKCAT/LEDs.h"
- #elif (BOARD == BOARD_MAXIMUS)
- #include "MAXIMUS/LEDs.h"
- #elif (BOARD == BOARD_MINIMUS)
- #include "MINIMUS/LEDs.h"
- #elif (BOARD == BOARD_ADAFRUITU4)
- #include "ADAFRUITU4/LEDs.h"
- #elif (BOARD == BOARD_MICROSIN162)
- #include "MICROSIN162/LEDs.h"
- #elif (BOARD == BOARD_SPARKFUN8U2)
- #include "SPARKFUN8U2/LEDs.h"
- #elif (BOARD == BOARD_EVK1101)
- #include "EVK1101/LEDs.h"
- #else
- #include "Board/LEDs.h"
- #endif
+ #include "../../Common/Common.h"
- #if !defined(LEDS_LED1)
- #define LEDS_LED1 0
- #endif
+ #if (BOARD == BOARD_NONE)
+ static inline void LEDs_Init(void) {};
+ static inline void LEDs_Disable(void) {};
+ static inline void LEDs_TurnOnLEDs(const uint_reg_t LEDMask) {};
+ static inline void LEDs_TurnOffLEDs(const uint_reg_t LEDMask) {};
+ static inline void LEDs_SetAllLEDs(const uint_reg_t LEDMask) {};
+ static inline void LEDs_ChangeLEDs(const uint_reg_t LEDMask, const uint_reg_t ActiveMask) {};
+ static inline void LEDs_ToggleLEDs(const uint_reg_t LEDMask) {};
+ static inline uint_reg_t LEDs_GetLEDs(void) { return 0; }
+ #elif (BOARD == BOARD_USBKEY)
+ #include "AVR8/USBKEY/LEDs.h"
+ #elif (BOARD == BOARD_STK525)
+ #include "AVR8/STK525/LEDs.h"
+ #elif (BOARD == BOARD_STK526)
+ #include "AVR8/STK526/LEDs.h"
+ #elif (BOARD == BOARD_RZUSBSTICK)
+ #include "AVR8/RZUSBSTICK/LEDs.h"
+ #elif (BOARD == BOARD_ATAVRUSBRF01)
+ #include "AVR8/ATAVRUSBRF01/LEDs.h"
+ #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
+ #include "AVR8/XPLAIN/LEDs.h"
+ #elif (BOARD == BOARD_BUMBLEB)
+ #include "AVR8/BUMBLEB/LEDs.h"
+ #elif (BOARD == BOARD_EVK527)
+ #include "AVR8/EVK527/LEDs.h"
+ #elif ((BOARD == BOARD_TEENSY) || (BOARD == BOARD_TEENSY2))
+ #include "AVR8/TEENSY/LEDs.h"
+ #elif (BOARD == BOARD_USBTINYMKII)
+ #include "AVR8/USBTINYMKII/LEDs.h"
+ #elif (BOARD == BOARD_BENITO)
+ #include "AVR8/BENITO/LEDs.h"
+ #elif (BOARD == BOARD_JMDBU2)
+ #include "AVR8/JMDBU2/LEDs.h"
+ #elif (BOARD == BOARD_OLIMEX162)
+ #include "AVR8/OLIMEX162/LEDs.h"
+ #elif (BOARD == BOARD_USBFOO)
+ #include "AVR8/USBFOO/LEDs.h"
+ #elif (BOARD == BOARD_UDIP)
+ #include "AVR8/UDIP/LEDs.h"
+ #elif (BOARD == BOARD_BUI)
+ #include "AVR8/BUI/LEDs.h"
+ #elif (BOARD == BOARD_UNO)
+ #include "AVR8/UNO/LEDs.h"
+ #elif (BOARD == BOARD_CULV3)
+ #include "AVR8/CULV3/LEDs.h"
+ #elif (BOARD == BOARD_BLACKCAT)
+ #include "AVR8/BLACKCAT/LEDs.h"
+ #elif (BOARD == BOARD_MAXIMUS)
+ #include "AVR8/MAXIMUS/LEDs.h"
+ #elif (BOARD == BOARD_MINIMUS)
+ #include "AVR8/MINIMUS/LEDs.h"
+ #elif (BOARD == BOARD_ADAFRUITU4)
+ #include "AVR8/ADAFRUITU4/LEDs.h"
+ #elif (BOARD == BOARD_MICROSIN162)
+ #include "AVR8/MICROSIN162/LEDs.h"
+ #elif (BOARD == BOARD_SPARKFUN8U2)
+ #include "AVR8/SPARKFUN8U2/LEDs.h"
+ #elif (BOARD == BOARD_EVK1101)
+ #include "UC3/EVK1101/LEDs.h"
+ #elif (BOARD == BOARD_TUL)
+ #include "AVR8/TUL/LEDs.h"
+ #elif (BOARD == BOARD_EVK1100)
+ #include "UC3/EVK1100/LEDs.h"
+ #elif (BOARD == BOARD_EVK1104)
+ #include "UC3/EVK1104/LEDs.h"
+ #elif (BOARD == BOARD_A3BU_XPLAINED)
+ #include "XMEGA/A3BU_XPLAINED/LEDs.h"
+ #elif ((BOARD == BOARD_USB2AX) || (BOARD == BOARD_USB2AX_V3))
+ #include "AVR8/USB2AX/LEDs.h"
+ #elif ((BOARD == BOARD_MICROPENDOUS_REV1) || (BOARD == BOARD_MICROPENDOUS_REV2) || \
+ (BOARD == BOARD_MICROPENDOUS_32U2))
+ #include "AVR8/MICROPENDOUS/LEDs.h"
+ #elif (BOARD == BOARD_B1_XPLAINED)
+ #include "XMEGA/B1_XPLAINED/LEDs.h"
+ #elif (BOARD == BOARD_MULTIO)
+ #include "AVR8/MULTIO/LEDs.h"
+ #elif (BOARD == BOARD_BIGMULTIO)
+ #include "AVR8/BIGMULTIO/LEDs.h"
+ #elif (BOARD == BOARD_DUCE)
+ #include "AVR8/DUCE/LEDs.h"
+ #elif (BOARD == BOARD_OLIMEX32U4)
+ #include "AVR8/OLIMEX32U4/LEDs.h"
+ #elif (BOARD == BOARD_OLIMEXT32U4)
+ #include "AVR8/OLIMEXT32U4/LEDs.h"
+ #else
+ #include "Board/LEDs.h"
+ #endif
- #if !defined(LEDS_LED2)
- #define LEDS_LED2 0
- #endif
+ /* Preprocessor Checks: */
+ #if !defined(__DOXYGEN__)
+ #if !defined(LEDS_LED1)
+ #define LEDS_LED1 0
+ #endif
- #if !defined(LEDS_LED3)
- #define LEDS_LED3 0
- #endif
+ #if !defined(LEDS_LED2)
+ #define LEDS_LED2 0
+ #endif
- #if !defined(LEDS_LED4)
- #define LEDS_LED4 0
- #endif
+ #if !defined(LEDS_LED3)
+ #define LEDS_LED3 0
+ #endif
+
+ #if !defined(LEDS_LED4)
+ #define LEDS_LED4 0
+ #endif
+ #endif
/* Pseudo-Functions for Doxygen: */
#if defined(__DOXYGEN__)
- /** Initialises the board LED driver so that the LEDs can be controlled. This sets the appropriate port
+ /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
* I/O pins as outputs, and sets the LEDs to default to off.
*/
static inline void LEDs_Init(void);
+ /** Disables the board LED driver, releasing the I/O pins back to their default high-impedance input mode. */
+ static inline void LEDs_Disable(void);
+
/** Turns on the LEDs specified in the given LED mask.
*
* \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
projects / pub / USBasp.git / blobdiff