/*
LUFA Library
Copyright (C) Dean Camera, 2010.
-
+
dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
+ www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
#include "MassStorage.h"
/** Structure to hold the latest Command Block Wrapper issued by the host, containing a SCSI command to execute. */
-CommandBlockWrapper_t CommandBlock;
+MS_CommandBlockWrapper_t CommandBlock;
/** Structure to hold the latest Command Status Wrapper to return to the host, containing the status of the last issued command. */
-CommandStatusWrapper_t CommandStatus = { .Signature = CSW_SIGNATURE };
+MS_CommandStatusWrapper_t CommandStatus = { .Signature = MS_CSW_SIGNATURE };
/** Flag to asynchronously abort any in-progress data transfers upon the reception of a mass storage reset command. */
-volatile bool IsMassStoreReset = false;
+volatile bool IsMassStoreReset = false;
/** Main program entry point. This routine configures the hardware required by the application, then
int main(void)
{
SetupHardware();
-
+
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
sei();
{
/* Indicate USB enumerating */
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
+
/* Reset the MSReset flag upon connection */
IsMassStoreReset = false;
}
*/
void EVENT_USB_Device_ConfigurationChanged(void)
{
- /* Indicate USB connected and ready */
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
+ bool ConfigSuccess = true;
- /* Setup Mass Storage In and Out Endpoints */
- if (!(Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPNUM, EP_TYPE_BULK,
- ENDPOINT_DIR_IN, MASS_STORAGE_IO_EPSIZE,
- ENDPOINT_BANK_SINGLE)))
- {
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- }
-
- if (!(Endpoint_ConfigureEndpoint(MASS_STORAGE_OUT_EPNUM, EP_TYPE_BULK,
- ENDPOINT_DIR_OUT, MASS_STORAGE_IO_EPSIZE,
- ENDPOINT_BANK_SINGLE)))
- {
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- }
+ /* Setup Mass Storage Data Endpoints */
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
+ MASS_STORAGE_IO_EPSIZE, ENDPOINT_BANK_SINGLE);
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
+ MASS_STORAGE_IO_EPSIZE, ENDPOINT_BANK_SINGLE);
+
+ /* Indicate endpoint configuration success or failure */
+ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
}
/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
/* Process UFI specific control requests */
switch (USB_ControlRequest.bRequest)
{
- case REQ_MassStorageReset:
+ case MS_REQ_MassStorageReset:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
+ Endpoint_ClearStatusStage();
/* Indicate that the current transfer should be aborted */
IsMassStoreReset = true;
-
- Endpoint_ClearStatusStage();
}
break;
- case REQ_GetMaxLUN:
+ case MS_REQ_GetMaxLUN:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
/* Indicate to the host the number of supported LUNs (virtual disks) on the device */
Endpoint_Write_Byte(TOTAL_LUNS - 1);
-
+
Endpoint_ClearIN();
-
Endpoint_ClearStatusStage();
}
-
+
break;
}
}
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
/* Check direction of command, select Data IN endpoint if data is from the device */
- if (CommandBlock.Flags & COMMAND_DIRECTION_DATA_IN)
+ if (CommandBlock.Flags & MS_COMMAND_DIR_DATA_IN)
Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM);
/* Decode the received SCSI command, set returned status code */
- CommandStatus.Status = SCSI_DecodeSCSICommand() ? Command_Pass : Command_Fail;
+ CommandStatus.Status = SCSI_DecodeSCSICommand() ? MS_SCSI_COMMAND_Pass : MS_SCSI_COMMAND_Fail;
/* Load in the CBW tag into the CSW to link them together */
CommandStatus.Tag = CommandBlock.Tag;
/* Load in the data residue counter into the CSW */
CommandStatus.DataTransferResidue = CommandBlock.DataTransferLength;
-
+
/* Stall the selected data pipe if command failed (if data is still to be transferred) */
- if ((CommandStatus.Status == Command_Fail) && (CommandStatus.DataTransferResidue))
+ if ((CommandStatus.Status == MS_SCSI_COMMAND_Fail) && (CommandStatus.DataTransferResidue))
Endpoint_StallTransaction();
/* Return command status block to the host */
/* Reset the data endpoint banks */
Endpoint_ResetFIFO(MASS_STORAGE_OUT_EPNUM);
Endpoint_ResetFIFO(MASS_STORAGE_IN_EPNUM);
-
+
Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM);
Endpoint_ClearStall();
Endpoint_ResetDataToggle();
{
/* Select the Data Out endpoint */
Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM);
-
+
/* Abort if no command has been sent from the host */
if (!(Endpoint_IsOUTReceived()))
return false;
return false;
/* Verify the command block - abort if invalid */
- if ((CommandBlock.Signature != CBW_SIGNATURE) ||
- (CommandBlock.LUN >= TOTAL_LUNS) ||
- (CommandBlock.Flags & 0x1F) ||
- (CommandBlock.SCSICommandLength == 0) ||
- (CommandBlock.SCSICommandLength > MAX_SCSI_COMMAND_LENGTH))
+ if ((CommandBlock.Signature != MS_CBW_SIGNATURE) ||
+ (CommandBlock.LUN >= TOTAL_LUNS) ||
+ (CommandBlock.Flags & 0x1F) ||
+ (CommandBlock.SCSICommandLength == 0) ||
+ (CommandBlock.SCSICommandLength > sizeof(CommandBlock.SCSICommandData)))
{
/* Stall both data pipes until reset by host */
Endpoint_StallTransaction();
Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM);
Endpoint_StallTransaction();
-
+
return false;
}
Endpoint_Read_Stream_LE(&CommandBlock.SCSICommandData,
CommandBlock.SCSICommandLength,
StreamCallback_AbortOnMassStoreReset);
-
+
/* Check if the current command is being aborted by the host */
if (IsMassStoreReset)
return false;
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearOUT();
-
+
return true;
}
if (IsMassStoreReset)
return;
}
-
+
/* Write the CSW to the endpoint */
Endpoint_Write_Stream_LE(&CommandStatus, sizeof(CommandStatus),
StreamCallback_AbortOnMassStoreReset);
-
+
/* Check if the current command is being aborted by the host */
if (IsMassStoreReset)
return;
* if a Mass Storage Reset request has been issued to the control endpoint.
*/
uint8_t StreamCallback_AbortOnMassStoreReset(void)
-{
+{
/* Abort if a Mass Storage reset command was received */
if (IsMassStoreReset)
return STREAMCALLBACK_Abort;
-
+
/* Continue with the current stream operation */
return STREAMCALLBACK_Continue;
}
+
projects / pub / USBasp.git / blobdiff