Fix incorrect Dataflash header file included for the STK525 inside Atmel Studio.

[pub/USBasp.git] / Projects / SerialToLCD / SerialToLCD.c

diff --git a/Projects/SerialToLCD/SerialToLCD.c b/Projects/SerialToLCD/SerialToLCD.c
index 385bcde..21a5d68 100644 (file)
--- a/Projects/SerialToLCD/SerialToLCD.c
+++ b/Projects/SerialToLCD/SerialToLCD.c
@@ -29,7 +29,7 @@
   this software.
 */
 
   this software.
 */
 

-/** \file 
+/** \file

  *
  *  Main source file for the SerialToLCD program. This file contains the main tasks of
  *  the project and is responsible for the initial application hardware configuration.
  *
  *  Main source file for the SerialToLCD program. This file contains the main tasks of
  *  the project and is responsible for the initial application hardware configuration.


@@ -51,7 +51,7 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
        {
                .Config =
                        {
        {
                .Config =
                        {

-                               .ControlInterfaceNumber   = 0,
+                               .ControlInterfaceNumber   = INTERFACE_ID_CDC_CCI,

                                .DataINEndpoint           =
                                        {
                                                .Address          = CDC_TX_EPADDR,
                                .DataINEndpoint           =
                                        {
                                                .Address          = CDC_TX_EPADDR,


@@ -101,7 +101,7 @@ int main(void)
                {
                        static uint8_t EscapePending = 0;
                        int16_t HD44780Byte = RingBuffer_Remove(&FromHost_Buffer);
                {
                        static uint8_t EscapePending = 0;
                        int16_t HD44780Byte = RingBuffer_Remove(&FromHost_Buffer);

-                       
+

                        if (HD44780Byte == COMMAND_ESCAPE)
                        {
                                if (EscapePending)
                        if (HD44780Byte == COMMAND_ESCAPE)
                        {
                                if (EscapePending)


@@ -137,12 +137,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the application's functionality. */
 void SetupHardware(void)
 {
 /** Configures the board hardware and chip peripherals for the application's functionality. */
 void SetupHardware(void)
 {

+#if (ARCH == ARCH_AVR8)

        /* Disable watchdog if enabled by bootloader/fuses */
        MCUSR &= ~(1 << WDRF);
        wdt_disable();
 
        /* Disable clock division */
        clock_prescale_set(clock_div_1);
        /* Disable watchdog if enabled by bootloader/fuses */
        MCUSR &= ~(1 << WDRF);
        wdt_disable();
 
        /* Disable clock division */
        clock_prescale_set(clock_div_1);

+#endif

 
        /* Hardware Initialization */
        USB_Init();
 
        /* Hardware Initialization */
        USB_Init();


@@ -150,7 +152,7 @@ void SetupHardware(void)
        /* Power up the HD44780 Interface */
        HD44780_Initialize();
        HD44780_WriteCommand(CMD_DISPLAY_ON);
        /* Power up the HD44780 Interface */
        HD44780_Initialize();
        HD44780_WriteCommand(CMD_DISPLAY_ON);

-       
+

        /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */
        TCCR0B = (1 << CS02);
 }
        /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */
        TCCR0B = (1 << CS02);
 }