-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2009.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, and distribute this software\r
- and its documentation for any purpose and without fee is hereby\r
- granted, provided that the above copyright notice appear in all\r
- copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- *\r
- * Main source file for the MIDI input demo. This file contains the main tasks of the demo and\r
- * is responsible for the initial application hardware configuration.\r
- */\r
-\r
-#include "MIDI.h"\r
-\r
-/** Main program entry point. This routine configures the hardware required by the application, then\r
- * starts the scheduler to run the application tasks.\r
- */\r
-int main(void)\r
-{\r
- SetupHardware();\r
- \r
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
-\r
- for (;;)\r
- {\r
- MIDI_Task();\r
- USB_USBTask();\r
- }\r
-}\r
-\r
-/** Configures the board hardware and chip peripherals for the demo's functionality. */\r
-void SetupHardware(void)\r
-{\r
- /* Disable watchdog if enabled by bootloader/fuses */\r
- MCUSR &= ~(1 << WDRF);\r
- wdt_disable();\r
-\r
- /* Disable clock division */\r
- clock_prescale_set(clock_div_1);\r
- \r
- /* Hardware Initialization */\r
- Joystick_Init();\r
- LEDs_Init();\r
- Buttons_Init();\r
- USB_Init();\r
-}\r
-\r
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */\r
-void EVENT_USB_Connect(void)\r
-{\r
- /* Indicate USB enumerating */\r
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
-}\r
-\r
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
- * the status LEDs, disables the sample update and PWM output timers and stops the USB and MIDI management tasks.\r
- */\r
-void EVENT_USB_Disconnect(void)\r
-{\r
- /* Indicate USB not ready */\r
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
-}\r
-\r
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration\r
- * of the USB device after enumeration - the device endpoints are configured and the MIDI management task started.\r
- */\r
-void EVENT_USB_ConfigurationChanged(void)\r
-{\r
- /* Indicate USB connected and ready */\r
- LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
-\r
- /* Setup MIDI stream endpoints */\r
- if (!(Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPNUM, EP_TYPE_BULK,\r
- ENDPOINT_DIR_OUT, MIDI_STREAM_EPSIZE,\r
- ENDPOINT_BANK_SINGLE)))\r
- {\r
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
- } \r
- \r
- if (!(Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPNUM, EP_TYPE_BULK,\r
- ENDPOINT_DIR_IN, MIDI_STREAM_EPSIZE,\r
- ENDPOINT_BANK_SINGLE)))\r
- {\r
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
- }\r
-}\r
-\r
-/** Task to handle the generation of MIDI note change events in response to presses of the board joystick, and send them\r
- * to the host.\r
- */\r
-void MIDI_Task(void)\r
-{\r
- static uint8_t PrevJoystickStatus;\r
-\r
- /* Select the MIDI IN stream */\r
- Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM);\r
-\r
- /* Check if endpoint is ready to be written to */\r
- if (Endpoint_IsINReady())\r
- {\r
- uint8_t MIDICommand = 0;\r
- uint8_t MIDIPitch;\r
- \r
- /* Get current joystick mask, XOR with previous to detect joystick changes */\r
- uint8_t JoystickStatus = Joystick_GetStatus();\r
- uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);\r
- \r
- /* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */\r
- uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));\r
-\r
- if (JoystickChanges & JOY_LEFT)\r
- {\r
- MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);\r
- MIDIPitch = 0x3C;\r
- }\r
-\r
- if (JoystickChanges & JOY_UP)\r
- {\r
- MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);\r
- MIDIPitch = 0x3D;\r
- }\r
-\r
- if (JoystickChanges & JOY_RIGHT)\r
- {\r
- MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);\r
- MIDIPitch = 0x3E;\r
- }\r
- \r
- if (JoystickChanges & JOY_DOWN)\r
- {\r
- MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);\r
- MIDIPitch = 0x3F;\r
- }\r
-\r
- if (JoystickChanges & JOY_PRESS)\r
- {\r
- MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);\r
- MIDIPitch = 0x3B;\r
- }\r
-\r
- /* Check if a MIDI command is to be sent */\r
- if (MIDICommand)\r
- {\r
- USB_MIDI_EventPacket_t MIDIEvent = (USB_MIDI_EventPacket_t)\r
- {\r
- .CableNumber = 0,\r
- .Command = (MIDICommand >> 4),\r
- \r
- .Data1 = MIDICommand | Channel,\r
- .Data2 = MIDIPitch,\r
- .Data3 = MIDI_STANDARD_VELOCITY, \r
- };\r
- \r
- /* Write the MIDI event packet to the endpoint */\r
- Endpoint_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent));\r
- \r
- /* Send the data in the endpoint to the host */\r
- Endpoint_ClearIN();\r
- }\r
- \r
- /* Save previous joystick value for next joystick change detection */\r
- PrevJoystickStatus = JoystickStatus;\r
- }\r
-\r
- /* Select the MIDI OUT stream */\r
- Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPNUM);\r
-\r
- /* Check if endpoint is ready to be read from, if so discard its (unused) data */\r
- if (Endpoint_IsOUTReceived())\r
- Endpoint_ClearOUT();\r
-}\r
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Main source file for the MIDI input demo. This file contains the main tasks of the demo and
+ * is responsible for the initial application hardware configuration.
+ */
+
+#include "MIDI.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ * enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+ SetupHardware();
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+ sei();
+
+ for (;;)
+ {
+ MIDI_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+ /* Disable watchdog if enabled by bootloader/fuses */
+ MCUSR &= ~(1 << WDRF);
+ wdt_disable();
+
+ /* Disable clock division */
+ clock_prescale_set(clock_div_1);
+
+ /* Hardware Initialization */
+ Joystick_Init();
+ LEDs_Init();
+ Buttons_Init();
+ USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
+void EVENT_USB_Device_Connect(void)
+{
+ /* Indicate USB enumerating */
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ * the status LEDs, disables the sample update and PWM output timers and stops the USB and MIDI management tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+ /* Indicate USB not ready */
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ * of the USB device after enumeration - the device endpoints are configured and the MIDI management task started.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+ bool ConfigSuccess = true;
+
+ /* Setup MIDI Data Endpoints */
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
+ MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
+ MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
+
+ /* Indicate endpoint configuration success or failure */
+ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Task to handle the generation of MIDI note change events in response to presses of the board joystick, and send them
+ * to the host.
+ */
+void MIDI_Task(void)
+{
+ static uint8_t PrevJoystickStatus;
+
+ /* Device must be connected and configured for the task to run */
+ if (USB_DeviceState != DEVICE_STATE_Configured)
+ return;
+
+ Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM);
+
+ if (Endpoint_IsINReady())
+ {
+ uint8_t MIDICommand = 0;
+ uint8_t MIDIPitch;
+
+ uint8_t JoystickStatus = Joystick_GetStatus();
+ uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
+
+ /* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
+ uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
+
+ if (JoystickChanges & JOY_LEFT)
+ {
+ MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+ MIDIPitch = 0x3C;
+ }
+
+ if (JoystickChanges & JOY_UP)
+ {
+ MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+ MIDIPitch = 0x3D;
+ }
+
+ if (JoystickChanges & JOY_RIGHT)
+ {
+ MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+ MIDIPitch = 0x3E;
+ }
+
+ if (JoystickChanges & JOY_DOWN)
+ {
+ MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+ MIDIPitch = 0x3F;
+ }
+
+ if (JoystickChanges & JOY_PRESS)
+ {
+ MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+ MIDIPitch = 0x3B;
+ }
+
+ /* Check if a MIDI command is to be sent */
+ if (MIDICommand)
+ {
+ MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
+ {
+ .CableNumber = 0,
+ .Command = (MIDICommand >> 4),
+
+ .Data1 = MIDICommand | Channel,
+ .Data2 = MIDIPitch,
+ .Data3 = MIDI_STANDARD_VELOCITY,
+ };
+
+ /* Write the MIDI event packet to the endpoint */
+ Endpoint_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
+
+ /* Send the data in the endpoint to the host */
+ Endpoint_ClearIN();
+ }
+
+ /* Save previous joystick value for next joystick change detection */
+ PrevJoystickStatus = JoystickStatus;
+ }
+
+ /* Select the MIDI OUT stream */
+ Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPNUM);
+
+ /* Check if a MIDI command has been received */
+ if (Endpoint_IsOUTReceived())
+ {
+ MIDI_EventPacket_t MIDIEvent;
+
+ /* Read the MIDI event packet from the endpoint */
+ Endpoint_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
+
+ /* Check to see if the sent command is a note on message with a non-zero velocity */
+ if ((MIDIEvent.Command == (MIDI_COMMAND_NOTE_ON >> 4)) && (MIDIEvent.Data3 > 0))
+ {
+ /* Change LEDs depending on the pitch of the sent note */
+ LEDs_SetAllLEDs(MIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2);
+ }
+ else
+ {
+ /* Turn off all LEDs in response to non Note On messages */
+ LEDs_SetAllLEDs(LEDS_NO_LEDS);
+ }
+
+ /* If the endpoint is now empty, clear the bank */
+ if (!(Endpoint_BytesInEndpoint()))
+ {
+ /* Clear the endpoint ready for new packet */
+ Endpoint_ClearOUT();
+ }
+ }
+}
+
projects / pub / USBasp.git / blobdiff