-/** \file\r
- *\r
- * This file contains special DoxyGen information for the generation of the main page and other special\r
- * documentation pages. It is not a project source file.\r
- */\r
- \r
-/** \mainpage CDC Class USB AVR Bootloader\r
- *\r
- * \section SSec_Compat Demo Compatibility:\r
- *\r
- * The following list indicates what microcontrollers are compatible with this demo.\r
- *\r
- * - Series 7 USB AVRs\r
- * - Series 6 USB AVRs\r
- * - Series 4 USB AVRs\r
- * - Series 2 USB AVRs\r
- *\r
- * \section SSec_Info USB Information:\r
- *\r
- * The following table gives a rundown of the USB utilization of this demo.\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><b>USB Mode:</b></td>\r
- * <td>Device</td>\r
- * </tr>\r
- * <tr>\r
- * <td><b>USB Class:</b></td>\r
- * <td>Communications Device Class (CDC)</td>\r
- * </tr>\r
- * <tr> \r
- * <td><b>USB Subclass:</b></td>\r
- * <td>Abstract Control Model (ACM)</td>\r
- * </tr>\r
- * <tr>\r
- * <td><b>Relevant Standards:</b></td>\r
- * <td>USBIF CDC Class Standard</td>\r
- * </tr>\r
- * <tr>\r
- * <td><b>Usable Speeds:</b></td>\r
- * <td>Full Speed Mode</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_Description Project Description: \r
- *\r
- * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109\r
- * protocol compatible programming software to load firmware onto the AVR. \r
- * \r
- * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If\r
- * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU\r
- * values in the accompanying makefile.\r
- * \r
- * This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.\r
- *\r
- * After running this bootloader for the first time on a new computer, you will need to supply the .INF\r
- * file located in this bootloader project's directory as the device's driver when running under Windows.\r
- * This will enable Windows to use its inbuilt CDC drivers, negating the need for custom drivers for the\r
- * device. Other Operating Systems should automatically use their own inbuilt CDC-ACM drivers.\r
- *\r
- * \section SSec_Options Project Options\r
- *\r
- * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><b>Define Name:</b></td>\r
- * <td><b>Location:</b></td>\r
- * <td><b>Description:</b></td>\r
- * </tr>\r
- * </table>\r
- */
\ No newline at end of file
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \mainpage CDC Class USB AVR Bootloader
+ *
+ * \section Sec_Compat Demo Compatibility:
+ *
+ * The following list indicates what microcontrollers are compatible with this demo.
+ *
+ * - Series 7 USB AVRs (AT90USBxxx7)
+ * - Series 6 USB AVRs (AT90USBxxx6)
+ * - Series 4 USB AVRs (ATMEGAxxU4)
+ * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *
+ * \section Sec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this demo.
+ *
+ * <table>
+ * <tr>
+ * <td><b>USB Mode:</b></td>
+ * <td>Device</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Class:</b></td>
+ * <td>Communications Device Class (CDC)</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Subclass:</b></td>
+ * <td>Abstract Control Model (ACM)</td>
+ * </tr>
+ * <tr>
+ * <td><b>Relevant Standards:</b></td>
+ * <td>USBIF CDC Class Standard</td>
+ * </tr>
+ * <tr>
+ * <td><b>Usable Speeds:</b></td>
+ * <td>Full Speed Mode</td>
+ * </tr>
+ * </table>
+ *
+ * \section Sec_Description Project Description:
+ *
+ * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
+ * protocol compatible programming software to load firmware onto the AVR.
+ *
+ * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
+ * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
+ * values in the accompanying makefile.
+ *
+ * This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.
+ *
+ * After running this bootloader for the first time on a new computer, you will need to supply the .INF
+ * file located in this bootloader project's directory as the device's driver when running under Windows.
+ * This will enable Windows to use its inbuilt CDC drivers, negating the need for custom drivers for the
+ * device. Other Operating Systems should automatically use their own inbuilt CDC-ACM drivers.
+ *
+ * \section Sec_Options Project Options
+ *
+ * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ * <table>
+ * <tr>
+ * <td>NO_BLOCK_SUPPORT</td>
+ * <td>Makefile LUFA_OPTS</td>
+ * <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made
+ * using the byte-level commands.
+ * </tr>
+ * <tr>
+ * <td>NO_EEPROM_BYTE_SUPPORT</td>
+ * <td>Makefile LUFA_OPTS</td>
+ * <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes
+ * to be made using the block-level commands.
+ * </tr>
+ * <tr>
+ * <td>NO_FLASH_BYTE_SUPPORT</td>
+ * <td>Makefile LUFA_OPTS</td>
+ * <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes
+ * to be made using the block-level commands.
+ * </tr>
+ * <tr>
+ * <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>
+ * <td>Makefile LUFA_OPTS</td>
+ * <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set progmatically.
+ * </tr>
+ * </table>
+ */
+
projects / pub / USBasp.git / blobdiff