-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2009.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, and distribute this software\r
- and its documentation for any purpose and without fee is hereby\r
- granted, provided that the above copyright notice appear in all\r
- copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \ingroup Group_USBDeviceClassDrivers\r
- * @defgroup Group_USBClassMSDevice Mass Storage Device Class Driver - LUFA/Drivers/Class/Device/MassStorage.h\r
- *\r
- * \section Sec_Dependencies Module Source Dependencies\r
- * The following files must be built with any user project that uses this module:\r
- * - LUFA/Drivers/USB/Class/Device/MassStorage.c\r
- *\r
- * \section Module Description\r
- * Functions, macros, variables, enums and types related to the management of USB Mass Storage Class interfaces\r
- * within a USB device.\r
- *\r
- * @{\r
- */\r
-\r
-#ifndef _MS_CLASS_H_\r
-#define _MS_CLASS_H_\r
-\r
- /* Includes: */\r
- #include "../../USB.h"\r
-\r
- #include <string.h>\r
-\r
- /* Enable C linkage for C++ Compilers: */\r
- #if defined(__cplusplus)\r
- extern "C" {\r
- #endif\r
-\r
- /* Macros: */\r
- /** Mass Storage Class specific request to reset the Mass Storage interface, ready for the next command. */\r
- #define REQ_MassStorageReset 0xFF\r
-\r
- /** Mass Storage Class specific request to retrieve the total number of Logical Units (drives) in the SCSI device. */\r
- #define REQ_GetMaxLUN 0xFE\r
- \r
- /** Magic signature for a Command Block Wrapper used in the Mass Storage Bulk-Only transport protocol. */\r
- #define MS_CBW_SIGNATURE 0x43425355UL\r
-\r
- /** Magic signature for a Command Status Wrapper used in the Mass Storage Bulk-Only transport protocol. */\r
- #define MS_CSW_SIGNATURE 0x53425355UL\r
- \r
- /** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from host-to-device. */\r
- #define MS_COMMAND_DIR_DATA_OUT (0 << 7)\r
-\r
- /** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from device-to-host. */\r
- #define MS_COMMAND_DIR_DATA_IN (1 << 7)\r
-\r
- /* Type defines: */\r
- /** Type define for a Command Block Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */\r
- typedef struct\r
- {\r
- uint32_t Signature; /**< Command block signature, must be CBW_SIGNATURE to indicate a valid Command Block */\r
- uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper */\r
- uint32_t DataTransferLength; /** Length of the optional data portion of the issued command, in bytes */\r
- uint8_t Flags; /**< Command block flags, indicating command data direction */\r
- uint8_t LUN; /**< Logical Unit number this command is issued to */\r
- uint8_t SCSICommandLength; /**< Length of the issued SCSI command within the SCSI command data array */\r
- uint8_t SCSICommandData[16]; /**< Issued SCSI command in the Command Block */\r
- } CommandBlockWrapper_t;\r
- \r
- /** Type define for a Command Status Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */\r
- typedef struct\r
- {\r
- uint32_t Signature; /**< Status block signature, must be CSW_SIGNATURE to indicate a valid Command Status */\r
- uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper */\r
- uint32_t DataTransferResidue; /**< Number of bytes of data not processed in the SCSI command */\r
- uint8_t Status; /**< Status code of the issued command - a value from the MassStorage_CommandStatusCodes_t enum */\r
- } CommandStatusWrapper_t;\r
- \r
- /* Enums: */\r
- /** Enum for the possible command status wrapper return status codes. */\r
- enum MassStorage_CommandStatusCodes_t\r
- {\r
- SCSI_Command_Pass = 0, /**< Command completed with no error */\r
- SCSI_Command_Fail = 1, /**< Command failed to complete - host may check the exact error via a SCSI REQUEST SENSE command */\r
- SCSI_Phase_Error = 2 /**< Command failed due to being invalid in the current phase */\r
- };\r
- \r
- /* Type Defines: */\r
- /** Type define for the virtual serial port line encoding settings, for storing the current USART configuration\r
- * as set by the host via a class specific request.\r
- */\r
- typedef struct\r
- {\r
- uint8_t InterfaceNumber; /**< Interface number of the Mass Storage interface within the device */\r
-\r
- uint8_t DataINEndpointNumber; /**< Endpoint number of the Mass Storage interface's IN data endpoint */\r
- uint16_t DataINEndpointSize; /**< Size in bytes of the Mass Storage interface's IN data endpoint */\r
-\r
- uint8_t DataOUTEndpointNumber; /**< Endpoint number of the Mass Storage interface's OUT data endpoint */\r
- uint16_t DataOUTEndpointSize; /**< Size in bytes of the Mass Storage interface's OUT data endpoint */\r
-\r
- uint8_t TotalLUNs;\r
-\r
- CommandBlockWrapper_t CommandBlock;\r
- CommandStatusWrapper_t CommandStatus;\r
-\r
- bool IsMassStoreReset;\r
- } USB_ClassInfo_MS_t;\r
- \r
- /* Function Prototypes: */\r
- #if defined(INCLUDE_FROM_MS_CLASS_C)\r
- static void USB_MS_ReturnCommandStatus(USB_ClassInfo_MS_t* MSInterfaceInfo);\r
- static bool USB_MS_ReadInCommandBlock(USB_ClassInfo_MS_t* MSInterfaceInfo);\r
- static uint8_t StreamCallback_AbortOnMassStoreReset(void);\r
- #endif\r
- \r
- bool USB_MS_ConfigureEndpoints(USB_ClassInfo_MS_t* MSInterfaceInfo);\r
- void USB_MS_ProcessControlPacket(USB_ClassInfo_MS_t* MSInterfaceInfo);\r
- void USB_MS_USBTask(USB_ClassInfo_MS_t* MSInterfaceInfo);\r
- \r
- bool CALLBACK_USB_MS_SCSICommandReceived(USB_ClassInfo_MS_t* MSInterfaceInfo);\r
- \r
- /* Disable C linkage for C++ Compilers: */\r
- #if defined(__cplusplus)\r
- }\r
- #endif\r
- \r
-#endif\r
-\r
-/** @} */\r
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Device mode driver for the library USB Mass Storage Class driver.
+ *
+ * Device mode driver for the library USB Mass Storage Class driver.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB module driver
+ * dispatch header located in LUFA/Drivers/USB.h.
+ */
+
+/** \ingroup Group_USBClassMS
+ * \defgroup Group_USBClassMSDevice Mass Storage Class Device Mode Driver
+ *
+ * \section Sec_Dependencies Module Source Dependencies
+ * The following files must be built with any user project that uses this module:
+ * - LUFA/Drivers/USB/Class/Device/MassStorage.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
+ *
+ * \section Sec_ModDescription Module Description
+ * Device Mode USB Class driver framework interface, for the Mass Storage USB Class driver.
+ *
+ * @{
+ */
+
+#ifndef _MS_CLASS_DEVICE_H_
+#define _MS_CLASS_DEVICE_H_
+
+ /* Includes: */
+ #include "../../USB.h"
+ #include "../Common/MassStorage.h"
+
+ /* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_MS_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Type Defines: */
+ /** \brief Mass Storage Class Device Mode Configuration and State Structure.
+ *
+ * Class state structure. An instance of this structure should be made for each Mass Storage interface
+ * within the user application, and passed to each of the Mass Storage class driver functions as the
+ * \c MSInterfaceInfo parameter. This stores each Mass Storage interface's configuration and state information.
+ */
+ typedef struct
+ {
+ const struct
+ {
+ uint8_t InterfaceNumber; /**< Interface number of the Mass Storage interface within the device. */
+
+ uint8_t DataINEndpointNumber; /**< Endpoint number of the Mass Storage interface's IN data endpoint. */
+ uint16_t DataINEndpointSize; /**< Size in bytes of the Mass Storage interface's IN data endpoint. */
+ bool DataINEndpointDoubleBank; /**< Indicates if the Mass Storage interface's IN data endpoint should use double banking. */
+
+ uint8_t DataOUTEndpointNumber; /**< Endpoint number of the Mass Storage interface's OUT data endpoint. */
+ uint16_t DataOUTEndpointSize; /**< Size in bytes of the Mass Storage interface's OUT data endpoint. */
+ bool DataOUTEndpointDoubleBank; /**< Indicates if the Mass Storage interface's OUT data endpoint should use double banking. */
+
+ uint8_t TotalLUNs; /**< Total number of logical drives in the Mass Storage interface. */
+ } Config; /**< Config data for the USB class interface within the device. All elements in this section
+ * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
+ */
+ struct
+ {
+ MS_CommandBlockWrapper_t CommandBlock; /**< Mass Storage class command block structure, stores the received SCSI
+ * command from the host which is to be processed.
+ */
+ MS_CommandStatusWrapper_t CommandStatus; /**< Mass Storage class command status structure, set elements to indicate
+ * the issued command's success or failure to the host.
+ */
+ volatile bool IsMassStoreReset; /**< Flag indicating that the host has requested that the Mass Storage interface be reset
+ * and that all current Mass Storage operations should immediately abort.
+ */
+ } State; /**< State data for the USB class interface within the device. All elements in this section
+ * are reset to their defaults when the interface is enumerated.
+ */
+ } USB_ClassInfo_MS_Device_t;
+
+ /* Function Prototypes: */
+ /** Configures the endpoints of a given Mass Storage interface, ready for use. This should be linked to the library
+ * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration
+ * containing the given Mass Storage interface is selected.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
+ *
+ * \return Boolean \c true if the endpoints were successfully configured, \c false otherwise.
+ */
+ bool MS_Device_ConfigureEndpoints(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Processes incoming control requests from the host, that are directed to the given Mass Storage class interface. This should be
+ * linked to the library \ref EVENT_USB_Device_ControlRequest() event.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
+ */
+ void MS_Device_ProcessControlRequest(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** General management task for a given Mass Storage class interface, required for the correct operation of the interface. This should
+ * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage configuration and state.
+ */
+ void MS_Device_USBTask(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Mass Storage class driver callback for the user processing of a received SCSI command. This callback will fire each time the
+ * host sends a SCSI command which requires processing by the user application. Inside this callback the user is responsible
+ * for the processing of the received SCSI command from the host. The SCSI command is available in the CommandBlock structure
+ * inside the Mass Storage class state structure passed as a parameter to the callback function.
+ *
+ * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
+ *
+ * \return Boolean \c true if the SCSI command was successfully processed, \c false otherwise.
+ */
+ bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /* Private Interface - For use in library only: */
+ #if !defined(__DOXYGEN__)
+ /* Function Prototypes: */
+ #if defined(__INCLUDE_FROM_MASSSTORAGE_DEVICE_C)
+ static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+ static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+ #endif
+
+ #endif
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
+
+/** @} */
+
projects / pub / USBasp.git / blobdiff