Add support for ATmega168p CPU

[pub/USBasp.git] / firmware / usbdrv / usbdrv.h

diff --git a/firmware/usbdrv/usbdrv.h b/firmware/usbdrv/usbdrv.h
index e8cc4b3..113854e 100644 (file)
--- a/firmware/usbdrv/usbdrv.h
+++ b/firmware/usbdrv/usbdrv.h
@@ -5,13 +5,10 @@
  * Tabsize: 4
  * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
  * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
- * This Revision: $Id: usbdrv.h 793 2010-07-15 15:58:11Z cs $
  */
 
 #ifndef __usbdrv_h_included__
 #define __usbdrv_h_included__
-#include "usbconfig.h"
-#include "usbportability.h"
 
 /*
 Hardware Prerequisites:
@@ -118,11 +115,28 @@ USB messages, even if they address another (low-speed) device on the same bus.
 
 */
 
+
+#ifdef __cplusplus
+// This header should be included as C-header from C++ code. However if usbdrv.c
+// is incorporated into a C++ module with an include, function names are mangled
+// and this header must be parsed as C++ header, too. External modules should be
+// treated as C, though, because they are compiled separately as C code.
+extern "C" {
+#endif
+
+#include "usbconfig.h"
+#include "usbportability.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+
 /* ------------------------------------------------------------------------- */
 /* --------------------------- Module Interface ---------------------------- */
 /* ------------------------------------------------------------------------- */
 
-#define USBDRV_VERSION  20100715
+#define USBDRV_VERSION  20121206
 /* This define uniquely identifies a driver version. It is a decimal number
  * constructed from the driver's release date in the form YYYYMMDD. If the
  * driver's behavior or interface changes, you can use this constant to
@@ -163,6 +177,17 @@ USB messages, even if they address another (low-speed) device on the same bus.
  */
 #define USB_NO_MSG  ((usbMsgLen_t)-1)   /* constant meaning "no message" */
 
+#ifndef usbMsgPtr_t
+#define usbMsgPtr_t uchar *
+#endif
+/* Making usbMsgPtr_t a define allows the user of this library to define it to
+ * an 8 bit type on tiny devices. This reduces code size, especially if the
+ * compiler supports a tiny memory model.
+ * The type can be a pointer or scalar type, casts are made where necessary.
+ * Although it's paradoxical, Gcc 4 generates slightly better code for scalar
+ * types than for pointers.
+ */
+
 struct usbRequest;  /* forward declaration */
 
 USB_PUBLIC void usbInit(void);
@@ -178,7 +203,7 @@ USB_PUBLIC void usbPoll(void);
  * Please note that debug outputs through the UART take ~ 0.5ms per byte
  * at 19200 bps.
  */
-extern uchar *usbMsgPtr;
+extern usbMsgPtr_t usbMsgPtr;
 /* This variable may be used to pass transmit data to the driver from the
  * implementation of usbFunctionWrite(). It is also used internally by the
  * driver for standard control requests.
@@ -390,13 +415,13 @@ extern volatile schar   usbRxLen;
  * about the various methods to define USB descriptors. If you do nothing,
  * the default descriptors will be used.
  */
-#define USB_PROP_IS_DYNAMIC     (1 << 14)
+#define USB_PROP_IS_DYNAMIC     (1u << 14)
 /* If this property is set for a descriptor, usbFunctionDescriptor() will be
  * used to obtain the particular descriptor. Data directly returned via
  * usbMsgPtr are FLASH data by default, combine (OR) with USB_PROP_IS_RAM to
  * return RAM data.
  */
-#define USB_PROP_IS_RAM         (1 << 15)
+#define USB_PROP_IS_RAM         (1u << 15)
 /* If this property is set for a descriptor, the data is read from RAM
  * memory instead of Flash. The property is used for all methods to provide
  * external descriptors.
@@ -719,6 +744,7 @@ typedef struct usbRequest{
 #define USBDESCR_HID_PHYS       0x23
 
 //#define USBATTR_BUSPOWER        0x80  // USB 1.1 does not define this value any more
+#define USBATTR_BUSPOWER        0
 #define USBATTR_SELFPOWER       0x40
 #define USBATTR_REMOTEWAKE      0x20