/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2009.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
USB Missile Launcher Demo\r
- Copyright (C) Dave Fletcher, 2009.\r
+ Copyright (C) Dave Fletcher, 2010.\r
fletch at fletchtronics dot net\r
\r
Based on research by Scott Weston at\r
*/\r
\r
/*\r
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
- Copyright 2009 Dave Fletcher (fletch [at] fletchtronics [dot] net)\r
-\r
- Permission to use, copy, modify, and distribute this software\r
- and its documentation for any purpose and without fee is hereby\r
- granted, provided that the above copyright notice appear in all\r
- copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+ Copyright 2010 Dave Fletcher (fletch [at] fletchtronics [dot] net)\r
+\r
+ Permission to use, copy, modify, distribute, and sell this \r
+ software and its documentation for any purpose is hereby granted\r
+ without fee, provided that the above copyright notice appear in \r
+ all copies and that both that the copyright notice and this\r
+ permission notice and warranty disclaimer appear in supporting \r
+ documentation, and that the name of the author not be used in \r
+ advertising or publicity pertaining to distribution of the \r
software without specific, written prior permission.\r
\r
The author disclaim all warranties with regard to this\r
\r
\r
/** Main program entry point. This routine configures the hardware required by the application, then\r
- * starts the scheduler to run the application tasks.\r
+ * enters a loop to run the application tasks in sequence.\r
*/\r
int main(void)\r
{\r
* \param[in] Report Report data to send.\r
* \param[in] ReportSize Report length in bytes.\r
*/\r
-void Send_Command_Report(uint8_t *Report, uint16_t ReportSize)\r
+void Send_Command_Report(uint8_t* const Report, const uint16_t ReportSize)\r
{\r
memcpy(CmdBuffer, Report, 8);\r
WriteNextReport(CmdBuffer, ReportSize);\r
*\r
* \param[in] Command One of the command constants.\r
*/\r
-void Send_Command(uint8_t* Command)\r
+void Send_Command(uint8_t* const Command)\r
{\r
if ((CmdState == CMD_STOP && Command != CMD_STOP) ||\r
(CmdState != CMD_STOP && Command == CMD_STOP))\r
{\r
- LEDs_ChangeLEDs(LEDS_LED4, ~LEDs_GetLEDs() & LEDS_LED4);\r
+ LEDs_ToggleLEDs(LEDS_LED4);\r
\r
Send_Command_Report(CMD_INITA, 8);\r
Send_Command_Report(CMD_INITB, 8);\r
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and\r
* starts the library USB task to begin the enumeration and USB management process.\r
*/\r
-void EVENT_USB_DeviceAttached(void)\r
+void EVENT_USB_Host_DeviceAttached(void)\r
{\r
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
}\r
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and\r
* stops the library USB task management process.\r
*/\r
-void EVENT_USB_DeviceUnattached(void)\r
+void EVENT_USB_Host_DeviceUnattached(void)\r
{\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
}\r
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully\r
* enumerated by the host and is now ready to be used by the application.\r
*/\r
-void EVENT_USB_DeviceEnumerationComplete(void)\r
+void EVENT_USB_Host_DeviceEnumerationComplete(void)\r
{\r
LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
}\r
\r
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */\r
-void EVENT_USB_HostError(const uint8_t ErrorCode)\r
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)\r
{\r
USB_ShutDown();\r
\r
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while\r
* enumerating an attached USB device.\r
*/\r
-void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
{\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
}\r
* \param[in] ReportOUTData Buffer containing the report to send to the device\r
* \param[in] ReportLength Length of the report to send\r
*/\r
-void WriteNextReport(uint8_t* ReportOUTData, uint16_t ReportLength)\r
+void WriteNextReport(uint8_t* const ReportOUTData, const uint16_t ReportLength)\r
{\r
/* Select and unfreeze HID data OUT pipe */\r
Pipe_SelectPipe(HID_DATA_OUT_PIPE);\r
USB_ControlRequest = (USB_Request_Header_t)\r
{\r
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),\r
- .bRequest = 0x09,\r
+ .bRequest = REQ_SetReport,\r
.wValue = 0x02,\r
.wIndex = 0x01,\r
.wLength = ReportLength,\r
USB_HostState = HOST_STATE_Configured;\r
break;\r
case HOST_STATE_Configured:\r
- USB_HostState = HOST_STATE_Ready;\r
- break;\r
- case HOST_STATE_Ready:\r
DiscardNextReport();\r
\r
break;\r
projects / pub / USBasp.git / blobdiff