Add LUFA-side channel open/close routines, add signalling handlers for the creation...

[pub/USBasp.git] / Demos / Device / LowLevel / VirtualSerial / VirtualSerial.c

diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
index 3d496fa..bad8757 100644 (file)
--- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
+++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
@@ -1,13 +1,13 @@
 /*\r
              LUFA Library\r
-     Copyright (C) Dean Camera, 2009.\r
+     Copyright (C) Dean Camera, 2010.\r
               \r
   dean [at] fourwalledcubicle [dot] com\r
       www.fourwalledcubicle.com\r
 */\r
 \r
 /*\r
-  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
 \r
   Permission to use, copy, modify, distribute, and sell this \r
   software and its documentation for any purpose is hereby granted\r
@@ -49,59 +49,6 @@ CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0,
                                    .ParityType  = Parity_None,\r
                                    .DataBits    = 8            };\r
 \r
-\r
-#if 0\r
-/* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in\r
- *       <stdio.h> can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string).\r
- */\r
-       \r
-static int CDC_putchar(char c, FILE *stream)\r
-{        \r
-       Endpoint_SelectEndpoint(CDC_TX_EPNUM);\r
-\r
-       if (!(LineEncoding.BaudRateBPS))\r
-         return -1;\r
-       \r
-       if (Endpoint_WaitUntilReady())\r
-         return -1;\r
-\r
-       Endpoint_Write_Byte(c);\r
-       Endpoint_ClearIN();\r
-       \r
-       return 0;\r
-}\r
-\r
-static int CDC_getchar(FILE *stream)\r
-{\r
-       int c;\r
-\r
-       if (!(LineEncoding.BaudRateBPS))\r
-         return -1;\r
-\r
-       Endpoint_SelectEndpoint(CDC_RX_EPNUM);\r
-       \r
-       for (;;)\r
-       {\r
-               if (Endpoint_WaitUntilReady())\r
-                 return -1;\r
-       \r
-               if (!(Endpoint_BytesInEndpoint()))\r
-               {\r
-                       Endpoint_ClearOUT();\r
-               }\r
-               else\r
-               {\r
-                       c = Endpoint_Read_Byte();\r
-                       break;\r
-               }\r
-       }\r
-       \r
-       return c;\r
-}\r
-\r
-static FILE USBSerial = FDEV_SETUP_STREAM(CDC_putchar, CDC_getchar, _FDEV_SETUP_RW);\r
-#endif\r
-\r
 /** Main program entry point. This routine contains the overall program flow, including initial\r
  *  setup of all components and the main program loop.\r
  */\r