Minor updates to the Benito programmer - remove redundant PORT register manipulations.

[pub/USBasp.git] / Bootloaders / DFU / makefile

diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index d93836f..def34aa 100644 (file)
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -51,10 +51,10 @@
 MCU = at90usb1287\r
 \r
 \r
-# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring\r
+# Target board (see library "Board Types" documentation, USER or blank for projects not requiring\r
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called \r
 # "Board" inside the application directory.\r
-BOARD  = USBKEY\r
+BOARD = USBKEY\r
 \r
 \r
 # Processor frequency.\r
@@ -89,7 +89,11 @@ F_CPU = 8000000
 #\r
 #     If no clock division is performed on the input clock inside the AVR (via the\r
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.\r
-F_CLOCK = 8000000\r
+F_CLOCK = $(F_CPU)\r
+\r
+\r
+# Starting byte address of the bootloader\r
+BOOT_START = 0x1E000\r
 \r
 \r
 # Output format. (can be srec, ihex, binary)\r
@@ -110,6 +114,17 @@ OBJDIR = .
 LUFA_PATH = ../..\r
 \r
 \r
+# LUFA library compile-time options\r
+LUFA_OPTS  = -D USB_DEVICE_ONLY\r
+LUFA_OPTS += -D USE_NONSTANDARD_DESCRIPTOR_NAMES\r
+LUFA_OPTS += -D CONTROL_ONLY_DEVICE\r
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32\r
+LUFA_OPTS += -D TOTAL_NUM_CONFIGURATIONS=1\r
+LUFA_OPTS += -D USE_RAM_DESCRIPTORS\r
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
+LUFA_OPTS += -D NO_INTERNAL_SERIAL\r
+\r
+\r
 # List C source files here. (C dependencies are automatically generated.)\r
 SRC = $(TARGET).c                                                 \\r
          Descriptors.c                                               \\r
@@ -120,11 +135,9 @@ SRC = $(TARGET).c                                                 \
          $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \\r
          $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \\r
          $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \\r
-         $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/StdDescriptors.c    \\r
          $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c      \\r
          $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \\r
-         $(LUFA_PATH)/LUFA/Drivers/USB/Class/ConfigDescriptor.c      \\r
-         $(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c             \\r
+         $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \\r
 \r
  \r
 # List C++ source files here. (C dependencies are automatically generated.)\r
@@ -169,16 +182,9 @@ EXTRAINCDIRS = $(LUFA_PATH)/
 CSTANDARD = -std=gnu99\r
 \r
 \r
-# Starting byte address of the bootloader\r
-BOOT_START = 0x1E000\r
-\r
-\r
 # Place -D or -U options here for C sources\r
-CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD)\r
-CDEFS += -DUSB_DEVICE_ONLY -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DFEATURELESS_CONTROL_ONLY_DEVICE\r
-CDEFS += -DSTATIC_ENDPOINT_CONFIGURATION -DFIXED_CONTROL_ENDPOINT_SIZE=32\r
-CDEFS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
-CDEFS += -DUSE_RAM_DESCRIPTORS -DBOOT_START_ADDR=$(BOOT_START)UL -DUSE_SINGLE_DEVICE_CONFIGURATION\r
+CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)\r
+CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL\r
 \r
 \r
 # Place -D or -U options here for ASM sources\r
@@ -209,10 +215,6 @@ CFLAGS += -fdata-sections
 CFLAGS += -fpack-struct\r
 CFLAGS += -fshort-enums\r
 CFLAGS += -fno-inline-small-functions\r
-CFLAGS += -fno-reorder-blocks\r
-CFLAGS += -fno-reorder-blocks-and-partition\r
-CFLAGS += -fno-reorder-functions\r
-CFLAGS += -fno-toplevel-reorder\r
 CFLAGS += -Wall\r
 CFLAGS += -Wstrict-prototypes\r
 CFLAGS += -Wundef\r
@@ -503,7 +505,7 @@ sizeafter:
 checkhooks: build\r
        @echo\r
        @echo ------- Unhooked LUFA Events -------\r
-       @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \\r
+       @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
                   cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
                           echo "(None)"\r
        @echo ------------------------------------\r