/*
LUFA Library
- Copyright (C) Dean Camera, 2010.
-
+ Copyright (C) Dean Camera, 2011.
+
dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
+ www.lufa-lib.org
*/
/*
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
*
* Common definitions and declarations for the library USB Mass Storage Class driver.
*
- * \note This file should not be included directly. It is automatically included as needed by the class driver
- * dispatch header located in LUFA/Drivers/USB/Class/MassStorage.h.
+ * \note This file should not be included directly. It is automatically included as needed by the USB module driver
+ * dispatch header located in LUFA/Drivers/USB.h.
*/
/** \ingroup Group_USBClassMS
- * @defgroup Group_USBClassMSCommon Common Class Definitions
+ * \defgroup Group_USBClassMSCommon Common Class Definitions
*
- * \section Module Description
+ * \section Sec_ModDescription Module Description
* Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
* Mass Storage Class.
*
#define _MS_CLASS_COMMON_H_
/* Includes: */
- #include "../../USB.h"
-
- #include <string.h>
+ #include "../../Core/StdDescriptors.h"
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_MS_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/Class/MassStorage.h instead.
+ #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
#endif
-
- /* Macros: */
- /** Mass Storage class-specific request to reset the Mass Storage interface, ready for the next command. */
- #define REQ_MassStorageReset 0xFF
- /** Mass Storage class-specific request to retrieve the total number of Logical Units (drives) in the SCSI device. */
- #define REQ_GetMaxLUN 0xFE
-
+ /* Macros: */
/** Magic signature for a Command Block Wrapper used in the Mass Storage Bulk-Only transport protocol. */
- #define MS_CBW_SIGNATURE 0x43425355UL
+ #define MS_CBW_SIGNATURE 0x43425355UL
/** Magic signature for a Command Status Wrapper used in the Mass Storage Bulk-Only transport protocol. */
- #define MS_CSW_SIGNATURE 0x53425355UL
-
+ #define MS_CSW_SIGNATURE 0x53425355UL
+
/** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from host-to-device. */
- #define MS_COMMAND_DIR_DATA_OUT (0 << 7)
+ #define MS_COMMAND_DIR_DATA_OUT (0 << 7)
/** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from device-to-host. */
- #define MS_COMMAND_DIR_DATA_IN (1 << 7)
+ #define MS_COMMAND_DIR_DATA_IN (1 << 7)
+ /** \name SCSI Commands*/
+ //@{
/** SCSI Command Code for an INQUIRY command. */
#define SCSI_CMD_INQUIRY 0x12
/** SCSI Command Code for a MODE SENSE (10) command. */
#define SCSI_CMD_MODE_SENSE_10 0x5A
-
+ //@}
+
+ /** \name SCSI Sense Key Values */
+ //@{
/** SCSI Sense Code to indicate no error has occurred. */
#define SCSI_SENSE_KEY_GOOD 0x00
/** SCSI Sense Code to indicate an error whilst accessing the medium. */
#define SCSI_SENSE_KEY_MEDIUM_ERROR 0x03
- /** SCSI Sense Code to indicate a hardware has occurred. */
+ /** SCSI Sense Code to indicate a hardware error has occurred. */
#define SCSI_SENSE_KEY_HARDWARE_ERROR 0x04
/** SCSI Sense Code to indicate that an illegal request has been issued. */
/** SCSI Sense Code to indicate that the source data did not match the data read from the medium. */
#define SCSI_SENSE_KEY_MISCOMPARE 0x0E
-
+ //@}
+
+ /** \name SCSI Additional Sense Codes */
+ //@{
/** SCSI Additional Sense Code to indicate no additional sense information is available. */
#define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION 0x00
/** SCSI Additional Sense Code to indicate an invalid field was encountered while processing the issued command. */
#define SCSI_ASENSE_INVALID_FIELD_IN_CDB 0x24
+ /** SCSI Additional Sense Code to indicate that a medium that was previously indicated as not ready has now
+ * become ready for use.
+ */
+ #define SCSI_ASENSE_NOT_READY_TO_READY_CHANGE 0x28
+
/** SCSI Additional Sense Code to indicate that an attempt to write to a protected area was made. */
#define SCSI_ASENSE_WRITE_PROTECTED 0x27
/** SCSI Additional Sense Code to indicate that no removable medium is inserted into the device. */
#define SCSI_ASENSE_MEDIUM_NOT_PRESENT 0x3A
-
+ //@}
+
+ /** \name SCSI Additional Sense Key Code Qualifiers */
+ //@{
/** SCSI Additional Sense Qualifier Code to indicate no additional sense qualifier information is available. */
#define SCSI_ASENSEQ_NO_QUALIFIER 0x00
/** SCSI Additional Sense Qualifier Code to indicate that an operation is currently in progress. */
#define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07
+ //@}
- /* Type defines: */
+ /* Enums: */
+ /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the Mass
+ * Storage device class.
+ */
+ enum MS_Descriptor_ClassSubclassProtocol_t
+ {
+ MS_CSCP_MassStorageClass = 0x08, /**< Descriptor Class value indicating that the device or interface
+ * belongs to the Mass Storage class.
+ */
+ MS_CSCP_SCSITransparentSubclass = 0x06, /**< Descriptor Subclass value indicating that the device or interface
+ * belongs to the SCSI Transparent Command Set subclass of the Mass
+ * storage class.
+ */
+ MS_CSCP_BulkOnlyTransportProtocol = 0x50, /**< Descriptor Protocol value indicating that the device or interface
+ * belongs to the Bulk Only Transport protocol of the Mass Storage class.
+ */
+ };
+
+ /** Enum for the Mass Storage class specific control requests that can be issued by the USB bus host. */
+ enum MS_ClassRequests_t
+ {
+ MS_REQ_GetMaxLUN = 0xFE, /**< Mass Storage class-specific request to retrieve the total number of Logical
+ * Units (drives) in the SCSI device.
+ */
+ MS_REQ_MassStorageReset = 0xFF, /**< Mass Storage class-specific request to reset the Mass Storage interface,
+ * ready for the next command.
+ */
+ };
+
+ /** Enum for the possible command status wrapper return status codes. */
+ enum MS_CommandStatusCodes_t
+ {
+ MS_SCSI_COMMAND_Pass = 0, /**< Command completed with no error */
+ MS_SCSI_COMMAND_Fail = 1, /**< Command failed to complete - host may check the exact error via a
+ * SCSI REQUEST SENSE command.
+ */
+ MS_SCSI_COMMAND_PhaseError = 2, /**< Command failed due to being invalid in the current phase. */
+ };
+
+ /* Type Defines: */
/** \brief Mass Storage Class Command Block Wrapper.
*
- * Type define for a Command Block Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */
+ * Type define for a Command Block Wrapper, used in the Mass Storage Bulk-Only Transport protocol.
+ *
+ * \note Regardless of CPU architecture, these values should be stored as little endian.
+ */
typedef struct
{
- uint32_t Signature; /**< Command block signature, must be CBW_SIGNATURE to indicate a valid Command Block. */
+ uint32_t Signature; /**< Command block signature, must be \ref MS_CBW_SIGNATURE to indicate a valid Command Block. */
uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper. */
uint32_t DataTransferLength; /**< Length of the optional data portion of the issued command, in bytes. */
uint8_t Flags; /**< Command block flags, indicating command data direction. */
uint8_t LUN; /**< Logical Unit number this command is issued to. */
uint8_t SCSICommandLength; /**< Length of the issued SCSI command within the SCSI command data array. */
uint8_t SCSICommandData[16]; /**< Issued SCSI command in the Command Block. */
- } MS_CommandBlockWrapper_t;
-
+ } ATTR_PACKED MS_CommandBlockWrapper_t;
+
/** \brief Mass Storage Class Command Status Wrapper.
*
* Type define for a Command Status Wrapper, used in the Mass Storage Bulk-Only Transport protocol.
+ *
+ * \note Regardless of CPU architecture, these values should be stored as little endian.
*/
typedef struct
{
- uint32_t Signature; /**< Status block signature, must be CSW_SIGNATURE to indicate a valid Command Status. */
+ uint32_t Signature; /**< Status block signature, must be \ref MS_CSW_SIGNATURE to indicate a valid Command Status. */
uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper. */
uint32_t DataTransferResidue; /**< Number of bytes of data not processed in the SCSI command. */
- uint8_t Status; /**< Status code of the issued command - a value from the MassStorage_CommandStatusCodes_t enum. */
- } MS_CommandStatusWrapper_t;
-
+ uint8_t Status; /**< Status code of the issued command - a value from the \ref MS_CommandStatusCodes_t enum. */
+ } ATTR_PACKED MS_CommandStatusWrapper_t;
+
/** \brief Mass Storage Class SCSI Sense Structure
- *
+ *
* Type define for a SCSI Sense structure. Structures of this type are filled out by the
* device via the \ref MS_Host_RequestSense() function, indicating the current sense data of the
* device (giving explicit error codes for the last issued command). For details of the
*/
typedef struct
{
- uint8_t ResponseCode;
-
- uint8_t SegmentNumber;
-
- unsigned char SenseKey : 4;
- unsigned char Reserved : 1;
- unsigned char ILI : 1;
- unsigned char EOM : 1;
- unsigned char FileMark : 1;
-
- uint8_t Information[4];
- uint8_t AdditionalLength;
- uint8_t CmdSpecificInformation[4];
- uint8_t AdditionalSenseCode;
- uint8_t AdditionalSenseQualifier;
- uint8_t FieldReplaceableUnitCode;
- uint8_t SenseKeySpecific[3];
- } SCSI_Request_Sense_Response_t;
+ uint8_t ResponseCode;
+
+ uint8_t SegmentNumber;
+
+ unsigned SenseKey : 4;
+ unsigned Reserved : 1;
+ unsigned ILI : 1;
+ unsigned EOM : 1;
+ unsigned FileMark : 1;
+
+ uint8_t Information[4];
+ uint8_t AdditionalLength;
+ uint8_t CmdSpecificInformation[4];
+ uint8_t AdditionalSenseCode;
+ uint8_t AdditionalSenseQualifier;
+ uint8_t FieldReplaceableUnitCode;
+ uint8_t SenseKeySpecific[3];
+ } ATTR_PACKED SCSI_Request_Sense_Response_t;
/** \brief Mass Storage Class SCSI Inquiry Structure.
*
*/
typedef struct
{
- unsigned char DeviceType : 5;
- unsigned char PeripheralQualifier : 3;
-
- unsigned char Reserved : 7;
- unsigned char Removable : 1;
-
- uint8_t Version;
-
- unsigned char ResponseDataFormat : 4;
- unsigned char Reserved2 : 1;
- unsigned char NormACA : 1;
- unsigned char TrmTsk : 1;
- unsigned char AERC : 1;
-
- uint8_t AdditionalLength;
- uint8_t Reserved3[2];
-
- unsigned char SoftReset : 1;
- unsigned char CmdQue : 1;
- unsigned char Reserved4 : 1;
- unsigned char Linked : 1;
- unsigned char Sync : 1;
- unsigned char WideBus16Bit : 1;
- unsigned char WideBus32Bit : 1;
- unsigned char RelAddr : 1;
-
- uint8_t VendorID[8];
- uint8_t ProductID[16];
- uint8_t RevisionID[4];
- } SCSI_Inquiry_Response_t;
+ unsigned DeviceType : 5;
+ unsigned PeripheralQualifier : 3;
+
+ unsigned Reserved : 7;
+ unsigned Removable : 1;
+
+ uint8_t Version;
+
+ unsigned ResponseDataFormat : 4;
+ unsigned Reserved2 : 1;
+ unsigned NormACA : 1;
+ unsigned TrmTsk : 1;
+ unsigned AERC : 1;
+
+ uint8_t AdditionalLength;
+ uint8_t Reserved3[2];
+
+ unsigned SoftReset : 1;
+ unsigned CmdQue : 1;
+ unsigned Reserved4 : 1;
+ unsigned Linked : 1;
+ unsigned Sync : 1;
+ unsigned WideBus16Bit : 1;
+ unsigned WideBus32Bit : 1;
+ unsigned RelAddr : 1;
+
+ uint8_t VendorID[8];
+ uint8_t ProductID[16];
+ uint8_t RevisionID[4];
+ } ATTR_PACKED SCSI_Inquiry_Response_t;
- /* Enums: */
- /** Enum for the possible command status wrapper return status codes. */
- enum MassStorage_CommandStatusCodes_t
- {
- SCSI_Command_Pass = 0, /**< Command completed with no error */
- SCSI_Command_Fail = 1, /**< Command failed to complete - host may check the exact error via a
- * SCSI REQUEST SENSE command.
- */
- SCSI_Phase_Error = 2 /**< Command failed due to being invalid in the current phase. */
- };
-
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
-
+
#endif
/** @} */
+
projects / pub / USBasp.git / blobdiff