Added new \ref SPI_GetCurrentMode() function to the SPI peripheral driver.

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XPROGTarget.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 9be78d0..af0cc01 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
 /*
              LUFA Library

-     Copyright (C) Dean Camera, 2010.
+     Copyright (C) Dean Camera, 2011.

 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted


@@ -59,9 +59,9 @@ void XPROGTarget_EnableTargetPDI(void)
        UCSR1B = (1 << TXEN1);
        UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
        UCSR1B = (1 << TXEN1);
        UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 

-       /* Send two BREAKs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
-       XPROGTarget_SendBreak();
-       XPROGTarget_SendBreak();
+       /* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
+       XPROGTarget_SendIdle();
+       XPROGTarget_SendIdle();

 }
 
 /** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
 }
 
 /** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */


@@ -83,9 +83,9 @@ void XPROGTarget_EnableTargetTPI(void)
        UCSR1B = (1 << TXEN1);
        UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
        UCSR1B = (1 << TXEN1);
        UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 

-       /* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
-       XPROGTarget_SendBreak();
-       XPROGTarget_SendBreak();
+       /* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
+       XPROGTarget_SendIdle();
+       XPROGTarget_SendIdle();

 }
 
 /** Disables the target's PDI interface, exits programming mode and starts the target's application. */
 }
 
 /** Disables the target's PDI interface, exits programming mode and starts the target's application. */


@@ -140,7 +140,7 @@ void XPROGTarget_SendByte(const uint8_t Byte)
        UDR1    = Byte;
 }
 
        UDR1    = Byte;
 }
 

-/** Receives a byte via the software USART, blocking until data is received.
+/** Receives a byte via the hardware USART, blocking until data is received or timeout expired.

  *
  *  \return Received byte from the USART
  */
  *
  *  \return Received byte from the USART
  */


@@ -151,19 +151,19 @@ uint8_t XPROGTarget_ReceiveByte(void)
          XPROGTarget_SetRxMode();
 
        /* Wait until a byte has been received before reading */
          XPROGTarget_SetRxMode();
 
        /* Wait until a byte has been received before reading */

-       while (!(UCSR1A & (1 << RXC1)) && TimeoutTicksRemaining);
+       while (!(UCSR1A & (1 << RXC1)) && !(TimeoutExpired));

 
        return UDR1;
 }
 
 
        return UDR1;
 }
 

-/** Sends a BREAK via the USART to the attached target, consisting of a full frame of idle bits. */
-void XPROGTarget_SendBreak(void)
+/** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */
+void XPROGTarget_SendIdle(void)

 {
        /* Switch to Tx mode if currently in Rx mode */
        if (!(IsSending))
          XPROGTarget_SetTxMode();
 {
        /* Switch to Tx mode if currently in Rx mode */
        if (!(IsSending))
          XPROGTarget_SetTxMode();

-
-       /* Need to do nothing for a full frame to send a BREAK */
+       
+       /* Need to do nothing for a full frame to send an IDLE */

        for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
        {
                /* Wait for a full cycle of the clock */
        for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
        {
                /* Wait for a full cycle of the clock */