Update Doxygen documentation build scripts to fail if any warnings are generated.

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XPROGTarget.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 9be78d0..b50ffbd 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
 /*
              LUFA Library

-     Copyright (C) Dean Camera, 2010.
+     Copyright (C) Dean Camera, 2012.

 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)

 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted


@@ -59,9 +59,9 @@ void XPROGTarget_EnableTargetPDI(void)
        UCSR1B = (1 << TXEN1);
        UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
        UCSR1B = (1 << TXEN1);
        UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 

-       /* Send two BREAKs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
-       XPROGTarget_SendBreak();
-       XPROGTarget_SendBreak();
+       /* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
+       XPROGTarget_SendIdle();
+       XPROGTarget_SendIdle();

 }
 
 /** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
 }
 
 /** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */


@@ -83,16 +83,17 @@ void XPROGTarget_EnableTargetTPI(void)
        UCSR1B = (1 << TXEN1);
        UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
        UCSR1B = (1 << TXEN1);
        UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 

-       /* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
-       XPROGTarget_SendBreak();
-       XPROGTarget_SendBreak();
+       /* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
+       XPROGTarget_SendIdle();
+       XPROGTarget_SendIdle();

 }
 
 /** Disables the target's PDI interface, exits programming mode and starts the target's application. */
 void XPROGTarget_DisableTargetPDI(void)
 {
        /* Switch to Rx mode to ensure that all pending transmissions are complete */
 }
 
 /** Disables the target's PDI interface, exits programming mode and starts the target's application. */
 void XPROGTarget_DisableTargetPDI(void)
 {
        /* Switch to Rx mode to ensure that all pending transmissions are complete */

-       XPROGTarget_SetRxMode();
+       if (IsSending)
+         XPROGTarget_SetRxMode();

 
        /* Turn off receiver and transmitter of the USART, clear settings */
        UCSR1A  = ((1 << TXC1) | (1 << RXC1));
 
        /* Turn off receiver and transmitter of the USART, clear settings */
        UCSR1A  = ((1 << TXC1) | (1 << RXC1));


@@ -108,7 +109,8 @@ void XPROGTarget_DisableTargetPDI(void)
 void XPROGTarget_DisableTargetTPI(void)
 {
        /* Switch to Rx mode to ensure that all pending transmissions are complete */
 void XPROGTarget_DisableTargetTPI(void)
 {
        /* Switch to Rx mode to ensure that all pending transmissions are complete */

-       XPROGTarget_SetRxMode();
+       if (IsSending)
+         XPROGTarget_SetRxMode();

 
        /* Turn off receiver and transmitter of the USART, clear settings */
        UCSR1A |= (1 << TXC1) | (1 << RXC1);
 
        /* Turn off receiver and transmitter of the USART, clear settings */
        UCSR1A |= (1 << TXC1) | (1 << RXC1);


@@ -118,7 +120,7 @@ void XPROGTarget_DisableTargetTPI(void)
        /* Set all USART lines as inputs, tristate */
        DDRD  &= ~((1 << 5) | (1 << 3));
        PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
        /* Set all USART lines as inputs, tristate */
        DDRD  &= ~((1 << 5) | (1 << 3));
        PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));

-       
+

        /* Tristate target /RESET line */
        AUX_LINE_DDR  &= ~AUX_LINE_MASK;
        AUX_LINE_PORT &= ~AUX_LINE_MASK;
        /* Tristate target /RESET line */
        AUX_LINE_DDR  &= ~AUX_LINE_MASK;
        AUX_LINE_PORT &= ~AUX_LINE_MASK;


@@ -140,7 +142,7 @@ void XPROGTarget_SendByte(const uint8_t Byte)
        UDR1    = Byte;
 }
 
        UDR1    = Byte;
 }
 

-/** Receives a byte via the software USART, blocking until data is received.
+/** Receives a byte via the hardware USART, blocking until data is received or timeout expired.

  *
  *  \return Received byte from the USART
  */
  *
  *  \return Received byte from the USART
  */


@@ -151,24 +153,25 @@ uint8_t XPROGTarget_ReceiveByte(void)
          XPROGTarget_SetRxMode();
 
        /* Wait until a byte has been received before reading */
          XPROGTarget_SetRxMode();
 
        /* Wait until a byte has been received before reading */

-       while (!(UCSR1A & (1 << RXC1)) && TimeoutTicksRemaining);
+       while (!(UCSR1A & (1 << RXC1)) && !(TimeoutExpired));

 
        return UDR1;
 }
 
 
        return UDR1;
 }
 

-/** Sends a BREAK via the USART to the attached target, consisting of a full frame of idle bits. */
-void XPROGTarget_SendBreak(void)
+/** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */
+void XPROGTarget_SendIdle(void)

 {
        /* Switch to Tx mode if currently in Rx mode */
        if (!(IsSending))
          XPROGTarget_SetTxMode();
 
 {
        /* Switch to Tx mode if currently in Rx mode */
        if (!(IsSending))
          XPROGTarget_SetTxMode();
 

-       /* Need to do nothing for a full frame to send a BREAK */
+       /* Need to do nothing for a full frame to send an IDLE */

        for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
        {
                /* Wait for a full cycle of the clock */
                while (PIND & (1 << 5));
                while (!(PIND & (1 << 5)));
        for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
        {
                /* Wait for a full cycle of the clock */
                while (PIND & (1 << 5));
                while (!(PIND & (1 << 5)));

+               while (PIND & (1 << 5));

        }
 }
 
        }
 }
 


@@ -177,6 +180,7 @@ static void XPROGTarget_SetTxMode(void)
        /* Wait for a full cycle of the clock */
        while (PIND & (1 << 5));
        while (!(PIND & (1 << 5)));
        /* Wait for a full cycle of the clock */
        while (PIND & (1 << 5));
        while (!(PIND & (1 << 5)));

+       while (PIND & (1 << 5));

 
        PORTD  |=  (1 << 3);
        DDRD   |=  (1 << 3);
 
        PORTD  |=  (1 << 3);
        DDRD   |=  (1 << 3);