/*
LUFA Library
- Copyright (C) Dean Camera, 2010.
+ Copyright (C) Dean Camera, 2012.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
- The author disclaim all warranties with regard to this
+ The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
{
.Config =
{
- .DataINPipeNumber = 1,
- .DataINPipeDoubleBank = false,
-
- .DataOUTPipeNumber = 2,
- .DataOUTPipeDoubleBank = false,
+ .DataINPipe =
+ {
+ .Address = (PIPE_DIR_IN | 1),
+ .Banks = 1,
+ },
+ .DataOUTPipe =
+ {
+ .Address = (PIPE_DIR_OUT | 2),
+ .Banks = 1,
+ },
},
};
puts_P(PSTR(ESC_FG_CYAN "Mass Storage Host Demo running.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- sei();
+ GlobalInterruptEnable();
for (;;)
{
- switch (USB_HostState)
- {
- case HOST_STATE_Addressed:
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
- uint16_t ConfigDescriptorSize;
- uint8_t ConfigDescriptorData[512];
-
- if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
- sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
- {
- puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (MS_Host_ConfigurePipes(&FlashDisk_MS_Interface,
- ConfigDescriptorSize, ConfigDescriptorData) != MS_ENUMERROR_NoError)
- {
- puts_P(PSTR("Attached Device Not a Valid Mass Storage Device.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
- {
- puts_P(PSTR("Error Setting Device Configuration.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- puts_P(PSTR("Mass Storage Device Enumerated.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
- USB_HostState = HOST_STATE_Configured;
- break;
- case HOST_STATE_Configured:
- LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
- uint8_t MaxLUNIndex;
- if (MS_Host_GetMaxLUN(&FlashDisk_MS_Interface, &MaxLUNIndex))
- {
- puts_P(PSTR("Error retrieving max LUN index.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Total LUNs: %d - Using first LUN in device.\r\n"), (MaxLUNIndex + 1));
-
- if (MS_Host_ResetMSInterface(&FlashDisk_MS_Interface))
- {
- puts_P(PSTR("Error resetting Mass Storage interface.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- SCSI_Request_Sense_Response_t SenseData;
- if (MS_Host_RequestSense(&FlashDisk_MS_Interface, 0, &SenseData) != 0)
- {
- puts_P(PSTR("Error retrieving device sense.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (MS_Host_PreventAllowMediumRemoval(&FlashDisk_MS_Interface, 0, true))
- {
- puts_P(PSTR("Error setting Prevent Device Removal bit.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- SCSI_Inquiry_Response_t InquiryData;
- if (MS_Host_GetInquiryData(&FlashDisk_MS_Interface, 0, &InquiryData))
- {
- puts_P(PSTR("Error retrieving device Inquiry data.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID);
-
- puts_P(PSTR("Waiting until ready...\r\n"));
-
- for (;;)
- {
- uint8_t ErrorCode = MS_Host_TestUnitReady(&FlashDisk_MS_Interface, 0);
-
- if (!(ErrorCode))
- break;
-
- /* Check if an error other than a logical command error (device busy) received */
- if (ErrorCode != MS_ERROR_LOGICAL_CMD_FAILED)
- {
- puts_P(PSTR("Error waiting for device to be ready.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
- }
-
- puts_P(PSTR("Retrieving Capacity...\r\n"));
-
- SCSI_Capacity_t DiskCapacity;
- if (MS_Host_ReadDeviceCapacity(&FlashDisk_MS_Interface, 0, &DiskCapacity))
- {
- puts_P(PSTR("Error retrieving device capacity.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("%lu blocks of %lu bytes.\r\n"), DiskCapacity.Blocks, DiskCapacity.BlockSize);
-
- uint8_t BlockBuffer[DiskCapacity.BlockSize];
-
- if (MS_Host_ReadDeviceBlocks(&FlashDisk_MS_Interface, 0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer))
- {
- puts_P(PSTR("Error reading device block.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- puts_P(PSTR("\r\nContents of first block:\r\n"));
-
- for (uint16_t Chunk = 0; Chunk < (DiskCapacity.BlockSize >> 4); Chunk++)
- {
- uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4];
-
- /* Print out the 16 bytes of the chunk in HEX format */
- for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
- {
- char CurrByte = *(ChunkPtr + ByteOffset);
- printf_P(PSTR("%.2X "), CurrByte);
- }
-
- printf_P(PSTR(" "));
-
- /* Print out the 16 bytes of the chunk in ASCII format */
- for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
- {
- char CurrByte = *(ChunkPtr + ByteOffset);
- putchar(isprint(CurrByte) ? CurrByte : '.');
- }
-
- printf_P(PSTR("\r\n"));
- }
-
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
+ MassStorageHost_Task();
MS_Host_USBTask(&FlashDisk_MS_Interface);
USB_USBTask();
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
- SerialStream_Init(9600, false);
+ Serial_Init(9600, false);
LEDs_Init();
USB_Init();
+
+ /* Create a stdio stream for the serial port for stdin and stdout */
+ Serial_CreateStream(NULL);
+}
+
+/** Task to manage an enumerated USB Mass Storage device once connected, to print out
+ * data from the device.
+ */
+void MassStorageHost_Task(void)
+{
+ if (USB_HostState != HOST_STATE_Configured)
+ return;
+
+ LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+
+ puts_P(PSTR("Waiting until ready...\r\n"));
+
+ for (;;)
+ {
+ uint8_t ErrorCode = MS_Host_TestUnitReady(&FlashDisk_MS_Interface, 0);
+
+ if (!(ErrorCode))
+ break;
+
+ /* Check if an error other than a logical command error (device busy) received */
+ if (ErrorCode != MS_ERROR_LOGICAL_CMD_FAILED)
+ {
+ puts_P(PSTR("Error waiting for device to be ready.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+ }
+
+ puts_P(PSTR("Retrieving Capacity...\r\n"));
+
+ SCSI_Capacity_t DiskCapacity;
+ if (MS_Host_ReadDeviceCapacity(&FlashDisk_MS_Interface, 0, &DiskCapacity))
+ {
+ puts_P(PSTR("Error retrieving device capacity.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ printf_P(PSTR("%lu blocks of %lu bytes.\r\n"), DiskCapacity.Blocks, DiskCapacity.BlockSize);
+
+ uint8_t BlockBuffer[DiskCapacity.BlockSize];
+
+ if (MS_Host_ReadDeviceBlocks(&FlashDisk_MS_Interface, 0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer))
+ {
+ puts_P(PSTR("Error reading device block.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ puts_P(PSTR("\r\nContents of first block:\r\n"));
+
+ for (uint16_t Chunk = 0; Chunk < (DiskCapacity.BlockSize >> 4); Chunk++)
+ {
+ uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4];
+
+ /* Print out the 16 bytes of the chunk in HEX format */
+ for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
+ {
+ char CurrByte = *(ChunkPtr + ByteOffset);
+ printf_P(PSTR("%.2X "), CurrByte);
+ }
+
+ printf_P(PSTR(" "));
+
+ /* Print out the 16 bytes of the chunk in ASCII format */
+ for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
+ {
+ char CurrByte = *(ChunkPtr + ByteOffset);
+ putchar(isprint(CurrByte) ? CurrByte : '.');
+ }
+
+ printf_P(PSTR("\r\n"));
+ }
+
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
+ USB_Host_SetDeviceConfiguration(0);
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+ uint16_t ConfigDescriptorSize;
+ uint8_t ConfigDescriptorData[512];
+
+ if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
+ sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
+ {
+ puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ if (MS_Host_ConfigurePipes(&FlashDisk_MS_Interface,
+ ConfigDescriptorSize, ConfigDescriptorData) != MS_ENUMERROR_NoError)
+ {
+ puts_P(PSTR("Attached Device Not a Valid Mass Storage Device.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
+ {
+ puts_P(PSTR("Error Setting Device Configuration.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ uint8_t MaxLUNIndex;
+ if (MS_Host_GetMaxLUN(&FlashDisk_MS_Interface, &MaxLUNIndex))
+ {
+ puts_P(PSTR("Error retrieving max LUN index.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ printf_P(PSTR("Total LUNs: %d - Using first LUN in device.\r\n"), (MaxLUNIndex + 1));
+
+ if (MS_Host_ResetMSInterface(&FlashDisk_MS_Interface))
+ {
+ puts_P(PSTR("Error resetting Mass Storage interface.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ SCSI_Request_Sense_Response_t SenseData;
+ if (MS_Host_RequestSense(&FlashDisk_MS_Interface, 0, &SenseData) != 0)
+ {
+ puts_P(PSTR("Error retrieving device sense.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ if (MS_Host_PreventAllowMediumRemoval(&FlashDisk_MS_Interface, 0, true))
+ {
+ puts_P(PSTR("Error setting Prevent Device Removal bit.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ SCSI_Inquiry_Response_t InquiryData;
+ if (MS_Host_GetInquiryData(&FlashDisk_MS_Interface, 0, &InquiryData))
+ {
+ puts_P(PSTR("Error retrieving device Inquiry data.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID);
+
+ puts_P(PSTR("Mass Storage Device Enumerated.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
{
- USB_ShutDown();
+ USB_Disable();
printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
" -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
projects / pub / USBasp.git / blobdiff