Move RNDISConstants.h into the RNDIS class driver common definition header.

[pub/USBasp.git] / LUFA / Drivers / USB / LowLevel / Pipe.h

diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h
index 62d0935..8cf48cd 100644 (file)
--- a/LUFA/Drivers/USB/LowLevel/Pipe.h
+++ b/LUFA/Drivers/USB/LowLevel/Pipe.h
@@ -98,6 +98,8 @@
 
        /* Public Interface - May be used in end-application: */
                /* Macros: */
 
        /* Public Interface - May be used in end-application: */
                /* Macros: */

+                       /** \name Pipe Error Flag Masks */
+                       //@{

                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */
                        #define PIPE_ERRORFLAG_OVERFLOW         (1 << 6)
 
                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */
                        #define PIPE_ERRORFLAG_OVERFLOW         (1 << 6)
 


@@ -118,7 +120,10 @@
 
                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */
                        #define PIPE_ERRORFLAG_DATATGL          (1 << 0)
 
                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */
                        #define PIPE_ERRORFLAG_DATATGL          (1 << 0)

+                       //@}

 
 

+                       /** \name Pipe Token Masks */
+                       //@{

                        /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes),
                         *  which will trigger a control request on the attached device when data is written to the pipe.
                         */
                        /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes),
                         *  which will trigger a control request on the attached device when data is written to the pipe.
                         */


@@ -133,7 +138,10 @@
                         *  indicating that the pipe data will flow from host to device.
                         */
                        #define PIPE_TOKEN_OUT                  (2 << PTOKEN0)
                         *  indicating that the pipe data will flow from host to device.
                         */
                        #define PIPE_TOKEN_OUT                  (2 << PTOKEN0)

-
+                       //@}
+                       
+                       /** \name Pipe Bank Mode Masks */
+                       //@{

                        /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe
                         *  should have one single bank, which requires less USB FIFO memory but results in slower transfers as
                         *  only one USB device (the AVR or the attached device) can access the pipe's bank at the one time.
                        /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe
                         *  should have one single bank, which requires less USB FIFO memory but results in slower transfers as
                         *  only one USB device (the AVR or the attached device) can access the pipe's bank at the one time.


@@ -146,7 +154,8 @@
                         *  bank.
                         */
                        #define PIPE_BANK_DOUBLE                (1 << EPBK0)
                         *  bank.
                         */
                        #define PIPE_BANK_DOUBLE                (1 << EPBK0)

-
+                       //@}
+                       

                        /** Pipe address for the default control pipe, which always resides in address 0. This is
                         *  defined for convenience to give more readable code when used with the pipe macros.
                         */
                        /** Pipe address for the default control pipe, which always resides in address 0. This is
                         *  defined for convenience to give more readable code when used with the pipe macros.
                         */