Use immediate variable expansion in the second-deepest level makefile scripts to...

[pub/USBasp.git] / Projects / LEDNotifier / Descriptors.c

diff --git a/Projects/LEDNotifier/Descriptors.c b/Projects/LEDNotifier/Descriptors.c
index 858183c..feff812 100644 (file)
--- a/Projects/LEDNotifier/Descriptors.c
+++ b/Projects/LEDNotifier/Descriptors.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
 /*
              LUFA Library

-     Copyright (C) Dean Camera, 2010.
+     Copyright (C) Dean Camera, 2012.

 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)

 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted


@@ -37,24 +37,13 @@
 
 #include "Descriptors.h"
 
 
 #include "Descriptors.h"
 

-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
-       #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif

 
 /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
  *  device characteristics, including the supported USB version, control endpoint size and the
  *  number of device configurations. The descriptor is read out by the USB host when the enumeration
  *  process begins.
  */
 
 /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
  *  device characteristics, including the supported USB version, control endpoint size and the
  *  number of device configurations. The descriptor is read out by the USB host when the enumeration
  *  process begins.
  */

-USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =

 {
        .Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
 
 {
        .Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
 


@@ -81,7 +70,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
  *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
  *  a configuration so that the host may correctly communicate with the USB device.
  */
  *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
  *  a configuration so that the host may correctly communicate with the USB device.
  */

-USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =

 {
        .Config =
                {
 {
        .Config =
                {


@@ -93,7 +82,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
                        .ConfigurationNumber    = 1,
                        .ConfigurationStrIndex  = NO_DESCRIPTOR,
 
                        .ConfigurationNumber    = 1,
                        .ConfigurationStrIndex  = NO_DESCRIPTOR,
 

-                       .ConfigAttributes       = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
+                       .ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),

 
                        .MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
                },
 
                        .MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
                },


@@ -143,7 +132,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 

-                       .EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
+                       .EndpointAddress        = CDC_NOTIFICATION_EPADDR,

                        .Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = CDC_NOTIFICATION_EPSIZE,
                        .PollingIntervalMS      = 0xFF
                        .Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = CDC_NOTIFICATION_EPSIZE,
                        .PollingIntervalMS      = 0xFF


@@ -169,20 +158,20 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 

-                       .EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
+                       .EndpointAddress        = CDC_RX_EPADDR,

                        .Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = CDC_TXRX_EPSIZE,
                        .Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = CDC_TXRX_EPSIZE,

-                       .PollingIntervalMS      = 0x00
+                       .PollingIntervalMS      = 0x05

                },
 
        .CDC_DataInEndpoint =
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 
                },
 
        .CDC_DataInEndpoint =
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 

-                       .EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
+                       .EndpointAddress        = CDC_TX_EPADDR,

                        .Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = CDC_TXRX_EPSIZE,
                        .Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = CDC_TXRX_EPSIZE,

-                       .PollingIntervalMS      = 0x00
+                       .PollingIntervalMS      = 0x05

                }
 };
 
                }
 };
 


@@ -190,7 +179,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
  *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
  *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
  */
  *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
  *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
  */

-USB_Descriptor_String_t PROGMEM LanguageString =
+const USB_Descriptor_String_t PROGMEM LanguageString =

 {
        .Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
 
 {
        .Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
 


@@ -201,7 +190,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
  *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
  *  Descriptor.
  */
  *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
  *  Descriptor.
  */

-USB_Descriptor_String_t PROGMEM ManufacturerString =
+const USB_Descriptor_String_t PROGMEM ManufacturerString =

 {
        .Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
 
 {
        .Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
 


@@ -212,7 +201,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
  *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
  *  Descriptor.
  */
  *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
  *  Descriptor.
  */

-USB_Descriptor_String_t PROGMEM ProductString =
+const USB_Descriptor_String_t PROGMEM ProductString =

 {
        .Header                 = {.Size = USB_STRING_LEN(12), .Type = DTYPE_String},
 
 {
        .Header                 = {.Size = USB_STRING_LEN(12), .Type = DTYPE_String},