Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device...

[pub/USBasp.git] / Projects / USBtoSerial / USBtoSerial.c

diff --git a/Projects/USBtoSerial/USBtoSerial.c b/Projects/USBtoSerial/USBtoSerial.c
index b59a364..845c2a5 100644 (file)
--- a/Projects/USBtoSerial/USBtoSerial.c
+++ b/Projects/USBtoSerial/USBtoSerial.c
@@ -82,27 +82,24 @@ int main(void)
        for (;;)
        {
                /* Read bytes from the USB OUT endpoint into the USART transmit buffer */
        for (;;)
        {
                /* Read bytes from the USB OUT endpoint into the USART transmit buffer */

-               for (uint8_t DataBytesRem = CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface); DataBytesRem != 0; DataBytesRem--)
-               {
-                       if (RingBuffer_IsFull(&USBtoUSART_Buffer))
-                         break;
-                         
-                       RingBuffer_AtomicInsert(&USBtoUSART_Buffer, CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface));
-               }
+               int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+               if (!(ReceivedByte < 0) && !(RingBuffer_IsFull(&USBtoUSART_Buffer)))
+                 RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte);          

                
                

-               /* Check if the software USART flush timer has expired */
-               if (TIFR0 & (1 << TOV0))
+               /* Check if the UART receive buffer flush timer has expired or the buffer is nearly full */
+               RingBuff_Count_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);
+               if ((TIFR0 & (1 << TOV0)) || (BufferCount > 200))

                {
                        TIFR0 |= (1 << TOV0);
 
                        /* Read bytes from the USART receive buffer into the USB IN endpoint */
                {
                        TIFR0 |= (1 << TOV0);
 
                        /* Read bytes from the USART receive buffer into the USB IN endpoint */

-                       while (USARTtoUSB_Buffer.Count)
-                         CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_AtomicRemove(&USARTtoUSB_Buffer));
+                       while (BufferCount--)
+                         CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&USARTtoUSB_Buffer));

                }
                
                /* Load the next byte from the USART transmit buffer into the USART */
                }
                
                /* Load the next byte from the USART transmit buffer into the USART */

-               if (USBtoUSART_Buffer.Count)
-                 Serial_TxByte(RingBuffer_AtomicRemove(&USBtoUSART_Buffer));
+               if (!(RingBuffer_IsEmpty(&USBtoUSART_Buffer)))
+                 Serial_TxByte(RingBuffer_Remove(&USBtoUSART_Buffer));

                
                CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
                USB_USBTask();
                
                CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
                USB_USBTask();


@@ -142,10 +139,11 @@ void EVENT_USB_Device_Disconnect(void)
 /** Event handler for the library USB Configuration Changed event. */
 void EVENT_USB_Device_ConfigurationChanged(void)
 {
 /** Event handler for the library USB Configuration Changed event. */
 void EVENT_USB_Device_ConfigurationChanged(void)
 {

-       LEDs_SetAllLEDs(LEDMASK_USB_READY);
+       bool ConfigSuccess = true;

 
 

-       if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface)))
-         LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+       ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+
+       LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);

 }
 
 /** Event handler for the library USB Unhandled Control Request event. */
 }
 
 /** Event handler for the library USB Unhandled Control Request event. */


@@ -200,15 +198,15 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
        }
 
        /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
        }
 
        /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */

-       UCSR1A = 0;

        UCSR1B = 0;
        UCSR1B = 0;

+       UCSR1A = 0;

        UCSR1C = 0;
 
        /* Set the new baud rate before configuring the USART */
        UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
        
        /* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
        UCSR1C = 0;
 
        /* Set the new baud rate before configuring the USART */
        UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
        
        /* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */

-       UCSR1A = (1 << U2X1);   
-       UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));

        UCSR1C = ConfigMask;
        UCSR1C = ConfigMask;

+       UCSR1A = (1 << U2X1);
+       UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));

 }
 }