-# Hey Emacs, this is a -*- makefile -*-\r
-#----------------------------------------------------------------------------\r
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.\r
-# >> Modified for use with the LUFA project. <<\r
-#\r
-# Released to the Public Domain\r
-#\r
-# Additional material for this makefile was written by:\r
-# Peter Fleury\r
-# Tim Henigan\r
-# Colin O'Flynn\r
-# Reiner Patommel\r
-# Markus Pfaff\r
-# Sander Pool\r
-# Frederik Rouleau\r
-# Carlos Lamas\r
-# Dean Camera\r
-# Opendous Inc.\r
-# Denver Gingerich\r
-#\r
-#----------------------------------------------------------------------------\r
-# On command line:\r
-#\r
-# make all = Make software.\r
-#\r
-# make clean = Clean out built project files.\r
-#\r
-# make coff = Convert ELF to AVR COFF.\r
-#\r
-# make extcoff = Convert ELF to AVR Extended COFF.\r
-#\r
-# make program = Download the hex file to the device, using avrdude.\r
-# Please customize the avrdude settings below first!\r
-#\r
-# make dfu = Download the hex file to the device, using dfu-programmer (must\r
-# have dfu-programmer installed).\r
-#\r
-# make flip = Download the hex file to the device, using Atmel FLIP (must\r
-# have Atmel FLIP installed).\r
-#\r
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer\r
-# (must have dfu-programmer installed).\r
-#\r
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP\r
-# (must have Atmel FLIP installed).\r
-#\r
-# make doxygen = Generate DoxyGen documentation for the project (must have\r
-# DoxyGen installed)\r
-#\r
-# make debug = Start either simulavr or avarice as specified for debugging,\r
-# with avr-gdb or avr-insight as the front end for debugging.\r
-#\r
-# make filename.s = Just compile filename.c into the assembler code only.\r
-#\r
-# make filename.i = Create a preprocessed source file for use in submitting\r
-# bug reports to the GCC project.\r
-#\r
-# To rebuild project do "make clean" then "make all".\r
-#----------------------------------------------------------------------------\r
-\r
-\r
-# MCU name\r
-MCU = at90usb1287\r
-\r
-\r
-# Target architecture (see library "Board Types" documentation).\r
-ARCH = AVR8\r
-\r
-\r
-# Target board (see library "Board Types" documentation, NONE for projects not requiring\r
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called\r
-# "Board" inside the application directory.\r
-BOARD = USBKEY\r
-\r
-\r
-# Processor frequency.\r
-# This will define a symbol, F_CPU, in all source code files equal to the\r
-# processor frequency in Hz. You can then use this symbol in your source code to\r
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
-# automatically to create a 32-bit value in your source code.\r
-#\r
-# This will be an integer division of F_USB below, as it is sourced by\r
-# F_USB after it has run through any CPU prescalers. Note that this value\r
-# does not *change* the processor frequency - it should merely be updated to\r
-# reflect the processor speed set externally so that the code can use accurate\r
-# software delays.\r
-F_CPU = 8000000\r
-\r
-\r
-# Input clock frequency.\r
-# This will define a symbol, F_USB, in all source code files equal to the\r
-# input clock frequency (before any prescaling is performed) in Hz. This value may\r
-# differ from F_CPU if prescaling is used on the latter, and is required as the\r
-# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
-# at the end, this will be done automatically to create a 32-bit value in your\r
-# source code.\r
-#\r
-# If no clock division is performed on the input clock inside the AVR (via the\r
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.\r
-F_USB = $(F_CPU)\r
-\r
-\r
-# Output format. (can be srec, ihex, binary)\r
-FORMAT = ihex\r
-\r
-\r
-# Target file name (without extension).\r
-TARGET = MIDIToneGenerator\r
-\r
-\r
-# Object files directory\r
-# To put object files in current directory, use a dot (.), do NOT make\r
-# this an empty or blank macro!\r
-OBJDIR = .\r
-\r
-\r
-# Path to the LUFA library\r
-LUFA_PATH = ../..\r
-\r
-\r
-# LUFA library compile-time options and predefined tokens\r
-LUFA_OPTS = -D USB_DEVICE_ONLY\r
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0\r
-LUFA_OPTS += -D ORDERED_EP_CONFIG\r
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8\r
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1\r
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS\r
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
-\r
-\r
-# Create the LUFA source path variables by including the LUFA root makefile\r
-include $(LUFA_PATH)/LUFA/makefile\r
-\r
-\r
-# List C source files here. (C dependencies are automatically generated.)\r
-SRC = $(TARGET).c \\r
- Descriptors.c \\r
- $(LUFA_SRC_USB) \\r
- $(LUFA_SRC_USBCLASS)\r
-\r
-\r
-# List C++ source files here. (C dependencies are automatically generated.)\r
-CPPSRC =\r
-\r
-\r
-# List Assembler source files here.\r
-# Make them always end in a capital .S. Files ending in a lowercase .s\r
-# will not be considered source files but generated files (assembler\r
-# output from the compiler), and will be deleted upon "make clean"!\r
-# Even though the DOS/Win* filesystem matches both .s and .S the same,\r
-# it will preserve the spelling of the filenames, and gcc itself does\r
-# care about how the name is spelled on its command-line.\r
-ASRC =\r
-\r
-\r
-# Optimization level, can be [0, 1, 2, 3, s].\r
-# 0 = turn off optimization. s = optimize for size.\r
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)\r
-OPT = s\r
-\r
-\r
-# Debugging format.\r
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.\r
-# AVR Studio 4.10 requires dwarf-2.\r
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.\r
-DEBUG = dwarf-2\r
-\r
-\r
-# List any extra directories to look for include files here.\r
-# Each directory must be seperated by a space.\r
-# Use forward slashes for directory separators.\r
-# For a directory that has spaces, enclose it in quotes.\r
-EXTRAINCDIRS = $(LUFA_PATH)/\r
-\r
-\r
-# Compiler flag to set the C Standard level.\r
-# c89 = "ANSI" C\r
-# gnu89 = c89 plus GCC extensions\r
-# c99 = ISO C99 standard (not yet fully implemented)\r
-# gnu99 = c99 plus GCC extensions\r
-CSTANDARD = -std=c99\r
-\r
-\r
-# Place -D or -U options here for C sources\r
-CDEFS = -DF_CPU=$(F_CPU)UL\r
-CDEFS += -DF_USB=$(F_USB)UL\r
-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)\r
-CDEFS += $(LUFA_OPTS)\r
-\r
-\r
-# Place -D or -U options here for ASM sources\r
-ADEFS = -DF_CPU=$(F_CPU)\r
-ADEFS += -DF_USB=$(F_USB)UL\r
-ADEFS += -DBOARD=BOARD_$(BOARD)\r
-ADEFS += $(LUFA_OPTS)\r
-\r
-# Place -D or -U options here for C++ sources\r
-CPPDEFS = -DF_CPU=$(F_CPU)UL\r
-CPPDEFS += -DF_USB=$(F_USB)UL\r
-CPPDEFS += -DBOARD=BOARD_$(BOARD)\r
-CPPDEFS += $(LUFA_OPTS)\r
-#CPPDEFS += -D__STDC_LIMIT_MACROS\r
-#CPPDEFS += -D__STDC_CONSTANT_MACROS\r
-\r
-\r
-\r
-#---------------- Compiler Options C ----------------\r
-# -g*: generate debugging information\r
-# -O*: optimization level\r
-# -f...: tuning, see GCC manual and avr-libc documentation\r
-# -Wall...: warning level\r
-# -Wa,...: tell GCC to pass this to the assembler.\r
-# -adhlns...: create assembler listing\r
-CFLAGS = -g$(DEBUG)\r
-CFLAGS += $(CDEFS)\r
-CFLAGS += -O$(OPT)\r
-CFLAGS += -funsigned-char\r
-CFLAGS += -funsigned-bitfields\r
-CFLAGS += -ffunction-sections\r
-CFLAGS += -fno-inline-small-functions\r
-CFLAGS += -fpack-struct\r
-CFLAGS += -fshort-enums\r
-CFLAGS += -fno-strict-aliasing\r
-CFLAGS += -Wall\r
-CFLAGS += -Wstrict-prototypes\r
-#CFLAGS += -mshort-calls\r
-#CFLAGS += -fno-unit-at-a-time\r
-#CFLAGS += -Wundef\r
-#CFLAGS += -Wunreachable-code\r
-#CFLAGS += -Wsign-compare\r
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)\r
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))\r
-CFLAGS += $(CSTANDARD)\r
-\r
-\r
-#---------------- Compiler Options C++ ----------------\r
-# -g*: generate debugging information\r
-# -O*: optimization level\r
-# -f...: tuning, see GCC manual and avr-libc documentation\r
-# -Wall...: warning level\r
-# -Wa,...: tell GCC to pass this to the assembler.\r
-# -adhlns...: create assembler listing\r
-CPPFLAGS = -g$(DEBUG)\r
-CPPFLAGS += $(CPPDEFS)\r
-CPPFLAGS += -O$(OPT)\r
-CPPFLAGS += -funsigned-char\r
-CPPFLAGS += -funsigned-bitfields\r
-CPPFLAGS += -fpack-struct\r
-CPPFLAGS += -fshort-enums\r
-CPPFLAGS += -fno-exceptions\r
-CPPFLAGS += -Wall\r
-CPPFLAGS += -Wundef\r
-#CPPFLAGS += -mshort-calls\r
-#CPPFLAGS += -fno-unit-at-a-time\r
-#CPPFLAGS += -Wstrict-prototypes\r
-#CPPFLAGS += -Wunreachable-code\r
-#CPPFLAGS += -Wsign-compare\r
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)\r
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))\r
-#CPPFLAGS += $(CSTANDARD)\r
-\r
-\r
-#---------------- Assembler Options ----------------\r
-# -Wa,...: tell GCC to pass this to the assembler.\r
-# -adhlns: create listing\r
-# -gstabs: have the assembler create line number information; note that\r
-# for use in COFF files, additional information about filenames\r
-# and function names needs to be present in the assembler source\r
-# files -- see avr-libc docs [FIXME: not yet described there]\r
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex\r
-# dump that will be displayed for a given single line of source input.\r
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100\r
-\r
-\r
-#---------------- Library Options ----------------\r
-# Minimalistic printf version\r
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min\r
-\r
-# Floating point printf version (requires MATH_LIB = -lm below)\r
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt\r
-\r
-# If this is left blank, then it will use the Standard printf version.\r
-PRINTF_LIB =\r
-#PRINTF_LIB = $(PRINTF_LIB_MIN)\r
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)\r
-\r
-\r
-# Minimalistic scanf version\r
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min\r
-\r
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)\r
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt\r
-\r
-# If this is left blank, then it will use the Standard scanf version.\r
-SCANF_LIB =\r
-#SCANF_LIB = $(SCANF_LIB_MIN)\r
-#SCANF_LIB = $(SCANF_LIB_FLOAT)\r
-\r
-\r
-MATH_LIB = -lm\r
-\r
-\r
-# List any extra directories to look for libraries here.\r
-# Each directory must be seperated by a space.\r
-# Use forward slashes for directory separators.\r
-# For a directory that has spaces, enclose it in quotes.\r
-EXTRALIBDIRS =\r
-\r
-\r
-\r
-#---------------- External Memory Options ----------------\r
-\r
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),\r
-# used for variables (.data/.bss) and heap (malloc()).\r
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff\r
-\r
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),\r
-# only used for heap (malloc()).\r
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff\r
-\r
-EXTMEMOPTS =\r
-\r
-\r
-\r
-#---------------- Linker Options ----------------\r
-# -Wl,...: tell GCC to pass this to linker.\r
-# -Map: create map file\r
-# --cref: add cross reference to map file\r
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
-LDFLAGS += -Wl,--relax\r
-LDFLAGS += -Wl,--gc-sections\r
-LDFLAGS += $(EXTMEMOPTS)\r
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))\r
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)\r
-#LDFLAGS += -T linker_script.x\r
-\r
-\r
-\r
-#---------------- Programming Options (avrdude) ----------------\r
-\r
-# Programming hardware\r
-# Type: avrdude -c ?\r
-# to get a full listing.\r
-#\r
-AVRDUDE_PROGRAMMER = jtagmkII\r
-\r
-# com1 = serial port. Use lpt1 to connect to parallel port.\r
-AVRDUDE_PORT = usb\r
-\r
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex\r
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep\r
-\r
-\r
-# Uncomment the following if you want avrdude's erase cycle counter.\r
-# Note that this counter needs to be initialized first using -Yn,\r
-# see avrdude manual.\r
-#AVRDUDE_ERASE_COUNTER = -y\r
-\r
-# Uncomment the following if you do /not/ wish a verification to be\r
-# performed after programming the device.\r
-#AVRDUDE_NO_VERIFY = -V\r
-\r
-# Increase verbosity level. Please use this when submitting bug\r
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>\r
-# to submit bug reports.\r
-#AVRDUDE_VERBOSE = -v -v\r
-\r
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)\r
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)\r
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)\r
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)\r
-\r
-\r
-\r
-#---------------- Debugging Options ----------------\r
-\r
-# For simulavr only - target MCU frequency.\r
-DEBUG_MFREQ = $(F_CPU)\r
-\r
-# Set the DEBUG_UI to either gdb or insight.\r
-# DEBUG_UI = gdb\r
-DEBUG_UI = insight\r
-\r
-# Set the debugging back-end to either avarice, simulavr.\r
-DEBUG_BACKEND = avarice\r
-#DEBUG_BACKEND = simulavr\r
-\r
-# GDB Init Filename.\r
-GDBINIT_FILE = __avr_gdbinit\r
-\r
-# When using avarice settings for the JTAG\r
-JTAG_DEV = /dev/com1\r
-\r
-# Debugging port used to communicate between GDB / avarice / simulavr.\r
-DEBUG_PORT = 4242\r
-\r
-# Debugging host used to communicate between GDB / avarice / simulavr, normally\r
-# just set to localhost unless doing some sort of crazy debugging when\r
-# avarice is running on a different computer.\r
-DEBUG_HOST = localhost\r
-\r
-\r
-\r
-#============================================================================\r
-\r
-\r
-# Define programs and commands.\r
-SHELL = sh\r
-CC = avr-gcc\r
-OBJCOPY = avr-objcopy\r
-OBJDUMP = avr-objdump\r
-SIZE = avr-size\r
-AR = avr-ar rcs\r
-NM = avr-nm\r
-AVRDUDE = avrdude\r
-REMOVE = rm -f\r
-REMOVEDIR = rm -rf\r
-COPY = cp\r
-WINSHELL = cmd\r
-\r
-\r
-# Define Messages\r
-# English\r
-MSG_ERRORS_NONE = Errors: none\r
-MSG_BEGIN = -------- begin --------\r
-MSG_END = -------- end --------\r
-MSG_SIZE_BEFORE = Size before:\r
-MSG_SIZE_AFTER = Size after:\r
-MSG_COFF = Converting to AVR COFF:\r
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:\r
-MSG_FLASH = Creating load file for Flash:\r
-MSG_EEPROM = Creating load file for EEPROM:\r
-MSG_EXTENDED_LISTING = Creating Extended Listing:\r
-MSG_SYMBOL_TABLE = Creating Symbol Table:\r
-MSG_LINKING = Linking:\r
-MSG_COMPILING = Compiling C:\r
-MSG_COMPILING_CPP = Compiling C++:\r
-MSG_ASSEMBLING = Assembling:\r
-MSG_CLEANING = Cleaning project:\r
-MSG_CREATING_LIBRARY = Creating library:\r
-\r
-\r
-\r
-\r
-# Define all object files.\r
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)\r
-\r
-# Define all listing files.\r
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)\r
-\r
-\r
-# Compiler flags to generate dependency files.\r
-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d\r
-\r
-\r
-# Combine all necessary flags and optional flags.\r
-# Add target processor to flags.\r
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)\r
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)\r
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)\r
-\r
-\r
-\r
-\r
-\r
-# Default target.\r
-all: begin gccversion sizebefore build sizeafter end\r
-\r
-# Change the build target to build a HEX file or a library.\r
-build: elf hex eep lss sym\r
-#build: lib\r
-\r
-\r
-elf: $(TARGET).elf\r
-hex: $(TARGET).hex\r
-eep: $(TARGET).eep\r
-lss: $(TARGET).lss\r
-sym: $(TARGET).sym\r
-LIBNAME=lib$(TARGET).a\r
-lib: $(LIBNAME)\r
-\r
-\r
-\r
-# Eye candy.\r
-# AVR Studio 3.x does not check make's exit code but relies on\r
-# the following magic strings to be generated by the compile job.\r
-begin:\r
- @echo\r
- @echo $(MSG_BEGIN)\r
-\r
-end:\r
- @echo $(MSG_END)\r
- @echo\r
-\r
-\r
-# Display size of file.\r
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex\r
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf\r
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )\r
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )\r
-\r
-\r
-sizebefore:\r
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \\r
- 2>/dev/null; echo; fi\r
-\r
-sizeafter:\r
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
- 2>/dev/null; echo; fi\r
-\r
-\r
-\r
-# Display compiler version information.\r
-gccversion :\r
- @$(CC) --version\r
-\r
-\r
-# Program the device.\r
-program: $(TARGET).hex $(TARGET).eep\r
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
-\r
-flip: $(TARGET).hex\r
- batchisp -hardware usb -device $(MCU) -operation erase f\r
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
- batchisp -hardware usb -device $(MCU) -operation start reset 0\r
-\r
-dfu: $(TARGET).hex\r
- dfu-programmer $(MCU) erase\r
- dfu-programmer $(MCU) flash $(TARGET).hex\r
- dfu-programmer $(MCU) reset\r
-\r
-flip-ee: $(TARGET).hex $(TARGET).eep\r
- $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
- batchisp -hardware usb -device $(MCU) -operation start reset 0\r
- $(REMOVE) $(TARGET)eep.hex\r
-\r
-dfu-ee: $(TARGET).hex $(TARGET).eep\r
- dfu-programmer $(MCU) eeprom-flash $(TARGET).eep\r
- dfu-programmer $(MCU) reset\r
-\r
-\r
-# Generate avr-gdb config/init file which does the following:\r
-# define the reset signal, load the target file, connect to target, and set\r
-# a breakpoint at main().\r
-gdb-config:\r
- @$(REMOVE) $(GDBINIT_FILE)\r
- @echo define reset >> $(GDBINIT_FILE)\r
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)\r
- @echo end >> $(GDBINIT_FILE)\r
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)\r
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)\r
-ifeq ($(DEBUG_BACKEND),simulavr)\r
- @echo load >> $(GDBINIT_FILE)\r
-endif\r
- @echo break main >> $(GDBINIT_FILE)\r
-\r
-debug: gdb-config $(TARGET).elf\r
-ifeq ($(DEBUG_BACKEND), avarice)\r
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.\r
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \\r
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)\r
- @$(WINSHELL) /c pause\r
-\r
-else\r
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \\r
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)\r
-endif\r
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)\r
-\r
-\r
-\r
-\r
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.\r
-COFFCONVERT = $(OBJCOPY) --debugging\r
-COFFCONVERT += --change-section-address .data-0x800000\r
-COFFCONVERT += --change-section-address .bss-0x800000\r
-COFFCONVERT += --change-section-address .noinit-0x800000\r
-COFFCONVERT += --change-section-address .eeprom-0x810000\r
-\r
-\r
-\r
-coff: $(TARGET).elf\r
- @echo\r
- @echo $(MSG_COFF) $(TARGET).cof\r
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof\r
-\r
-\r
-extcoff: $(TARGET).elf\r
- @echo\r
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof\r
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof\r
-\r
-\r
-\r
-# Create final output files (.hex, .eep) from ELF output file.\r
-%.hex: %.elf\r
- @echo\r
- @echo $(MSG_FLASH) $@\r
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@\r
-\r
-%.eep: %.elf\r
- @echo\r
- @echo $(MSG_EEPROM) $@\r
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \\r
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0\r
-\r
-# Create extended listing file from ELF output file.\r
-%.lss: %.elf\r
- @echo\r
- @echo $(MSG_EXTENDED_LISTING) $@\r
- $(OBJDUMP) -h -S -z $< > $@\r
-\r
-# Create a symbol table from ELF output file.\r
-%.sym: %.elf\r
- @echo\r
- @echo $(MSG_SYMBOL_TABLE) $@\r
- $(NM) -n $< > $@\r
-\r
-\r
-\r
-# Create library from object files.\r
-.SECONDARY : $(TARGET).a\r
-.PRECIOUS : $(OBJ)\r
-%.a: $(OBJ)\r
- @echo\r
- @echo $(MSG_CREATING_LIBRARY) $@\r
- $(AR) $@ $(OBJ)\r
-\r
-\r
-# Link: create ELF output file from object files.\r
-.SECONDARY : $(TARGET).elf\r
-.PRECIOUS : $(OBJ)\r
-%.elf: $(OBJ)\r
- @echo\r
- @echo $(MSG_LINKING) $@\r
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)\r
-\r
-\r
-# Compile: create object files from C source files.\r
-$(OBJDIR)/%.o : %.c\r
- @echo\r
- @echo $(MSG_COMPILING) $<\r
- $(CC) -c $(ALL_CFLAGS) $< -o $@\r
-\r
-\r
-# Compile: create object files from C++ source files.\r
-$(OBJDIR)/%.o : %.cpp\r
- @echo\r
- @echo $(MSG_COMPILING_CPP) $<\r
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@\r
-\r
-\r
-# Compile: create assembler files from C source files.\r
-%.s : %.c\r
- $(CC) -S $(ALL_CFLAGS) $< -o $@\r
-\r
-\r
-# Compile: create assembler files from C++ source files.\r
-%.s : %.cpp\r
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@\r
-\r
-\r
-# Assemble: create object files from assembler source files.\r
-$(OBJDIR)/%.o : %.S\r
- @echo\r
- @echo $(MSG_ASSEMBLING) $<\r
- $(CC) -c $(ALL_ASFLAGS) $< -o $@\r
-\r
-\r
-# Create preprocessed source for use in sending a bug report.\r
-%.i : %.c\r
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@\r
-\r
-\r
-# Target: clean project.\r
-clean: begin clean_list end\r
-\r
-clean_list :\r
- @echo\r
- @echo $(MSG_CLEANING)\r
- $(REMOVE) $(TARGET).hex\r
- $(REMOVE) $(TARGET).eep\r
- $(REMOVE) $(TARGET).cof\r
- $(REMOVE) $(TARGET).elf\r
- $(REMOVE) $(TARGET).map\r
- $(REMOVE) $(TARGET).sym\r
- $(REMOVE) $(TARGET).lss\r
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)\r
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)\r
- $(REMOVE) $(SRC:.c=.s)\r
- $(REMOVE) $(SRC:.c=.d)\r
- $(REMOVE) $(SRC:.c=.i)\r
- $(REMOVEDIR) .dep\r
-\r
-doxygen:\r
- @echo Generating Project Documentation...\r
- @doxygen Doxygen.conf\r
- @echo Documentation Generation Complete.\r
-\r
-clean_doxygen:\r
- rm -rf Documentation\r
-\r
-checksource:\r
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \\r
- if [ -f $$f ]; then \\r
- echo "Found Source File: $$f" ; \\r
- else \\r
- echo "Source File Not Found: $$f" ; \\r
- fi; done \r
-\r
-\r
-# Create object files directory\r
-$(shell mkdir $(OBJDIR) 2>/dev/null)\r
-\r
-\r
-# Include the dependency files.\r
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)\r
-\r
-\r
-# Listing of phony targets.\r
-.PHONY : all begin finish end sizebefore sizeafter gccversion \\r
-build elf hex eep lss sym coff extcoff doxygen clean \\r
-clean_list clean_doxygen program dfu flip flip-ee dfu-ee \\r
-debug gdb-config checksource\r
+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+# >> Modified for use with the LUFA project. <<
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+# Dean Camera
+# Opendous Inc.
+# Denver Gingerich
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+# Please customize the avrdude settings below first!
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make doxygen = Generate DoxyGen documentation for the project (must have
+# DoxyGen installed)
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+
+# MCU name
+MCU = at90usb1287
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# "Board" inside the application directory.
+BOARD = USBKEY
+
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 8000000
+
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Target file name (without extension).
+TARGET = MIDIToneGenerator
+
+
+# Object files directory
+# To put object files in current directory, use a dot (.), do NOT make
+# this an empty or blank macro!
+OBJDIR = .
+
+
+# Path to the LUFA library
+LUFA_PATH = ../..
+
+
+# LUFA library compile-time options and predefined tokens
+LUFA_OPTS = -D USB_DEVICE_ONLY
+LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
+LUFA_OPTS += -D ORDERED_EP_CONFIG
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(TARGET).c \
+ Descriptors.c \
+ $(LUFA_SRC_USB) \
+ $(LUFA_SRC_USBCLASS)
+
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+
+# List Assembler source files here.
+# Make them always end in a capital .S. Files ending in a lowercase .s
+# will not be considered source files but generated files (assembler
+# output from the compiler), and will be deleted upon "make clean"!
+# Even though the DOS/Win* filesystem matches both .s and .S the same,
+# it will preserve the spelling of the filenames, and gcc itself does
+# care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+# 0 = turn off optimization. s = optimize for size.
+# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+# AVR Studio 4.10 requires dwarf-2.
+# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(LUFA_PATH)/
+
+
+# Compiler flag to set the C Standard level.
+# c89 = "ANSI" C
+# gnu89 = c89 plus GCC extensions
+# c99 = ISO C99 standard (not yet fully implemented)
+# gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=c99
+
+
+# Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
+CDEFS += $(LUFA_OPTS)
+
+
+# Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
+ADEFS += -DF_USB=$(F_USB)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+
+
+#---------------- Compiler Options C ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Compiler Options C++ ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CPPFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns: create listing
+# -gstabs: have the assembler create line number information; note that
+# for use in COFF files, additional information about filenames
+# and function names needs to be present in the assembler source
+# files -- see avr-libc docs [FIXME: not yet described there]
+# -listing-cont-lines: Sets the maximum number of continuation lines of hex
+# dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB =
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB =
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+# List any extra directories to look for libraries here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+#---------------- Linker Options ----------------
+# -Wl,...: tell GCC to pass this to linker.
+# -Map: create map file
+# --cref: add cross reference to map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = jtagmkII
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = usb
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level. Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+# just set to localhost unless doing some sort of crazy debugging when
+# avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = -------- end --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex eep lss sym
+#build: lib
+
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+ @echo
+ @echo $(MSG_BEGIN)
+
+end:
+ @echo $(MSG_END)
+ @echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
+MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
+FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+
+
+sizebefore:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+sizeafter:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+
+
+# Display compiler version information.
+gccversion :
+ @$(CC) --version
+
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+ $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+flip: $(TARGET).hex
+ batchisp -hardware usb -device $(MCU) -operation erase f
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+ batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+ dfu-programmer $(MCU) erase
+ dfu-programmer $(MCU) flash $(TARGET).hex
+ dfu-programmer $(MCU) reset
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+ batchisp -hardware usb -device $(MCU) -operation start reset 0
+ $(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
+ dfu-programmer $(MCU) reset
+
+
+# Generate avr-gdb config/init file which does the following:
+# define the reset signal, load the target file, connect to target, and set
+# a breakpoint at main().
+gdb-config:
+ @$(REMOVE) $(GDBINIT_FILE)
+ @echo define reset >> $(GDBINIT_FILE)
+ @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+ @echo end >> $(GDBINIT_FILE)
+ @echo file $(TARGET).elf >> $(GDBINIT_FILE)
+ @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+ @echo load >> $(GDBINIT_FILE)
+endif
+ @echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+ @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+ @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+ $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+ @$(WINSHELL) /c pause
+
+else
+ @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+ $(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+ @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+ @echo
+ @echo $(MSG_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+ @echo
+ @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+ @echo
+ @echo $(MSG_FLASH) $@
+ $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
+
+%.eep: %.elf
+ @echo
+ @echo $(MSG_EEPROM) $@
+ -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+ --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+ @echo
+ @echo $(MSG_EXTENDED_LISTING) $@
+ $(OBJDUMP) -h -S -z $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+ @echo
+ @echo $(MSG_SYMBOL_TABLE) $@
+ $(NM) -n $< > $@
+
+
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+ @echo
+ @echo $(MSG_CREATING_LIBRARY) $@
+ $(AR) $@ $(OBJ)
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+ @echo
+ @echo $(MSG_LINKING) $@
+ $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+ @echo
+ @echo $(MSG_COMPILING) $<
+ $(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+ @echo
+ @echo $(MSG_COMPILING_CPP) $<
+ $(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+ $(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+ $(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+ @echo
+ @echo $(MSG_ASSEMBLING) $<
+ $(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+ $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+ @echo
+ @echo $(MSG_CLEANING)
+ $(REMOVE) $(TARGET).hex
+ $(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET).cof
+ $(REMOVE) $(TARGET).elf
+ $(REMOVE) $(TARGET).map
+ $(REMOVE) $(TARGET).sym
+ $(REMOVE) $(TARGET).lss
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+ $(REMOVE) $(SRC:.c=.s)
+ $(REMOVE) $(SRC:.c=.d)
+ $(REMOVE) $(SRC:.c=.i)
+ $(REMOVEDIR) .dep
+
+doxygen:
+ @echo Generating Project Documentation...
+ @doxygen Doxygen.conf
+ @echo Documentation Generation Complete.
+
+clean_doxygen:
+ rm -rf Documentation
+
+checksource:
+ @for f in $(SRC) $(CPPSRC) $(ASRC); do \
+ if [ -f $$f ]; then \
+ echo "Found Source File: $$f" ; \
+ else \
+ echo "Source File Not Found: $$f" ; \
+ fi; done
+
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
+debug gdb-config checksource
projects / pub / USBasp.git / blobdiff