\r
/* Includes: */\r
#include "../../../Common/Common.h"\r
- #include "USBMode.h" \r
- #include "USBTask.h"\r
+ #include "USBMode.h"\r
\r
/* Enable C linkage for C++ Compilers: */\r
#if defined(__cplusplus)\r
*/\r
};\r
\r
- /* Function Prototypes: */\r
-\r
- /** \name Stream functions for null data */\r
- //@{\r
-\r
- /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host\r
- * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the\r
- * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro.\r
- *\r
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or\r
- * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer\r
- * will instead be performed as a series of chunks. Each time the pipe bank becomes empty while there is still data\r
- * to process (and after the current packet has been acknowledged) the BytesProcessed location will be updated with\r
- * the total number of bytes processed in the stream, and the function will exit with an error code of\r
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to\r
- * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed\r
- * value reaches the total transfer length.\r
- *\r
- * <b>Single Stream Transfer Example:</b>\r
- * \code\r
- * uint8_t ErrorCode;\r
- *\r
- * if ((ErrorCode = Pipe_Discard_Stream(512, NULL)) != PIPE_RWSTREAM_NoError)\r
- * {\r
- * // Stream failed to complete - check ErrorCode here\r
- * }\r
- * \endcode\r
- *\r
- * <b>Partial Stream Transfers Example:</b>\r
- * \code\r
- * uint8_t ErrorCode;\r
- * uint16_t BytesProcessed;\r
- *\r
- * BytesProcessed = 0;\r
- * while ((ErrorCode = Pipe_Discard_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)\r
- * {\r
- * // Stream not yet complete - do other actions here, abort if required\r
- * }\r
- *\r
- * if (ErrorCode != PIPE_RWSTREAM_NoError)\r
- * {\r
- * // Stream failed to complete - check ErrorCode here\r
- * }\r
- * \endcode\r
- *\r
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without\r
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().\r
- *\r
- * \param[in] Length Number of bytes to discard via the currently selected pipe.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be processed at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Discard_Stream(uint16_t Length,\r
- uint16_t* const BytesProcessed);\r
-\r
- /** Writes a given number of zeroed bytes to the pipe, sending full pipe packets from the host to the device\r
- * as needed. The last packet is not automatically sent once the remaining bytes has been written; the\r
- * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearOUT() macro.\r
- *\r
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or\r
- * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer\r
- * will instead be performed as a series of chunks. Each time the pipe bank becomes full while there is still data\r
- * to process (and after the current packet transmission has been initiated) the BytesProcessed location will be\r
- * updated with the total number of bytes processed in the stream, and the function will exit with an error code of\r
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to\r
- * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed\r
- * value reaches the total transfer length.\r
- *\r
- * <b>Single Stream Transfer Example:</b>\r
- * \code\r
- * uint8_t ErrorCode;\r
- *\r
- * if ((ErrorCode = Pipe_Null_Stream(512, NULL)) != PIPE_RWSTREAM_NoError)\r
- * {\r
- * // Stream failed to complete - check ErrorCode here\r
- * }\r
- * \endcode\r
- *\r
- * <b>Partial Stream Transfers Example:</b>\r
- * \code\r
- * uint8_t ErrorCode;\r
- * uint16_t BytesProcessed;\r
- *\r
- * BytesProcessed = 0;\r
- * while ((ErrorCode = Pipe_Null_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)\r
- * {\r
- * // Stream not yet complete - do other actions here, abort if required\r
- * }\r
- *\r
- * if (ErrorCode != PIPE_RWSTREAM_NoError)\r
- * {\r
- * // Stream failed to complete - check ErrorCode here\r
- * }\r
- * \endcode\r
- *\r
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without\r
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().\r
- *\r
- * \param[in] Length Number of zero bytes to write via the currently selected pipe.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be processed at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Null_Stream(uint16_t Length,\r
- uint16_t* const BytesProcessed);\r
-\r
- //@}\r
-\r
- /** \name Stream functions for RAM source/destination data */\r
- //@{\r
- \r
- /** Writes the given number of bytes to the pipe from the given buffer in little endian,\r
- * sending full packets to the device as needed. The last packet filled is not automatically sent;\r
- * the user is responsible for manually sending the last written packet to the host via the\r
- * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is\r
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.\r
- *\r
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,\r
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid\r
- * storage location, the transfer will instead be performed as a series of chunks. Each time\r
- * the pipe bank becomes full while there is still data to process (and after the current\r
- * packet transmission has been initiated) the BytesProcessed location will be updated with the\r
- * total number of bytes processed in the stream, and the function will exit with an error code of\r
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed\r
- * in the user code - to continue the transfer, call the function again with identical parameters\r
- * and it will resume until the BytesProcessed value reaches the total transfer length.\r
- *\r
- * <b>Single Stream Transfer Example:</b>\r
- * \code\r
- * uint8_t DataStream[512];\r
- * uint8_t ErrorCode;\r
- *\r
- * if ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream),\r
- * NULL)) != PIPE_RWSTREAM_NoError)\r
- * {\r
- * // Stream failed to complete - check ErrorCode here\r
- * }\r
- * \endcode\r
- *\r
- * <b>Partial Stream Transfers Example:</b>\r
- * \code\r
- * uint8_t DataStream[512];\r
- * uint8_t ErrorCode;\r
- * uint16_t BytesProcessed;\r
- *\r
- * BytesProcessed = 0;\r
- * while ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream),\r
- * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)\r
- * {\r
- * // Stream not yet complete - do other actions here, abort if required\r
- * }\r
- *\r
- * if (ErrorCode != PIPE_RWSTREAM_NoError)\r
- * {\r
- * // Stream failed to complete - check ErrorCode here\r
- * }\r
- * \endcode\r
- *\r
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without\r
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().\r
- *\r
- * \param[in] Buffer Pointer to the source data buffer to read from.\r
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be written at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Write_Stream_LE(const void* const Buffer,\r
- uint16_t Length,\r
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** Writes the given number of bytes to the pipe from the given buffer in big endian,\r
- * sending full packets to the device as needed. The last packet filled is not automatically sent;\r
- * the user is responsible for manually sending the last written packet to the host via the\r
- * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is\r
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.\r
- *\r
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without\r
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().\r
- *\r
- * \param[in] Buffer Pointer to the source data buffer to read from.\r
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be written at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Write_Stream_BE(const void* const Buffer,\r
- uint16_t Length,\r
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** Reads the given number of bytes from the pipe into the given buffer in little endian,\r
- * sending full packets to the device as needed. The last packet filled is not automatically sent;\r
- * the user is responsible for manually sending the last written packet to the host via the\r
- * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is\r
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.\r
- *\r
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,\r
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid\r
- * storage location, the transfer will instead be performed as a series of chunks. Each time\r
- * the pipe bank becomes empty while there is still data to process (and after the current\r
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number\r
- * of bytes processed in the stream, and the function will exit with an error code of\r
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed\r
- * in the user code - to continue the transfer, call the function again with identical parameters\r
- * and it will resume until the BytesProcessed value reaches the total transfer length.\r
- *\r
- * <b>Single Stream Transfer Example:</b>\r
- * \code\r
- * uint8_t DataStream[512];\r
- * uint8_t ErrorCode;\r
- *\r
- * if ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream),\r
- * NULL)) != PIPE_RWSTREAM_NoError)\r
- * {\r
- * // Stream failed to complete - check ErrorCode here\r
- * }\r
- * \endcode\r
- *\r
- * <b>Partial Stream Transfers Example:</b>\r
- * \code\r
- * uint8_t DataStream[512];\r
- * uint8_t ErrorCode;\r
- * uint16_t BytesProcessed;\r
- *\r
- * BytesProcessed = 0;\r
- * while ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream),\r
- * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)\r
- * {\r
- * // Stream not yet complete - do other actions here, abort if required\r
- * }\r
- *\r
- * if (ErrorCode != PIPE_RWSTREAM_NoError)\r
- * {\r
- * // Stream failed to complete - check ErrorCode here\r
- * }\r
- * \endcode\r
- *\r
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without\r
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().\r
- *\r
- * \param[out] Buffer Pointer to the source data buffer to write to.\r
- * \param[in] Length Number of bytes to read for the currently selected pipe to read from.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be read at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Read_Stream_LE(void* const Buffer,\r
- uint16_t Length,\r
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** Reads the given number of bytes from the pipe into the given buffer in big endian,\r
- * sending full packets to the device as needed. The last packet filled is not automatically sent;\r
- * the user is responsible for manually sending the last written packet to the host via the\r
- * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is\r
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.\r
- *\r
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without\r
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().\r
- *\r
- * \param[out] Buffer Pointer to the source data buffer to write to.\r
- * \param[in] Length Number of bytes to read for the currently selected pipe to read from.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be read at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Read_Stream_BE(void* const Buffer,\r
- uint16_t Length,\r
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);\r
- //@}\r
-\r
- /** \name Stream functions for EEPROM source/destination data */\r
- //@{\r
- \r
- /** EEPROM buffer source version of \ref Pipe_Write_Stream_LE().\r
- *\r
- * \param[in] Buffer Pointer to the source data buffer to read from.\r
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be written at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Write_EStream_LE(const void* const Buffer,\r
- uint16_t Length,\r
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);\r
- \r
- /** EEPROM buffer source version of \ref Pipe_Write_Stream_BE().\r
- *\r
- * \param[in] Buffer Pointer to the source data buffer to read from.\r
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be written at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Write_EStream_BE(const void* const Buffer,\r
- uint16_t Length,\r
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);\r
-\r
- /** EEPROM buffer source version of \ref Pipe_Read_Stream_LE().\r
- *\r
- * \param[out] Buffer Pointer to the source data buffer to write to.\r
- * \param[in] Length Number of bytes to read for the currently selected pipe to read from.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be read at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Read_EStream_LE(void* const Buffer,\r
- uint16_t Length,\r
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);\r
- \r
- /** EEPROM buffer source version of \ref Pipe_Read_Stream_BE().\r
- *\r
- * \param[out] Buffer Pointer to the source data buffer to write to.\r
- * \param[in] Length Number of bytes to read for the currently selected pipe to read from.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be read at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Read_EStream_BE(void* const Buffer,\r
- uint16_t Length,\r
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);\r
- //@}\r
-\r
- /** \name Stream functions for PROGMEM source/destination data */\r
- //@{\r
- \r
- /** FLASH buffer source version of \ref Pipe_Write_Stream_LE().\r
- *\r
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.\r
- *\r
- * \param[in] Buffer Pointer to the source data buffer to read from.\r
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be written at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Write_PStream_LE(const void* const Buffer,\r
- uint16_t Length,\r
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);\r
- \r
- /** FLASH buffer source version of \ref Pipe_Write_Stream_BE().\r
- *\r
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.\r
- *\r
- * \param[in] Buffer Pointer to the source data buffer to read from.\r
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.\r
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should\r
- * updated, \c NULL if the entire stream should be written at once.\r
- *\r
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.\r
- */\r
- uint8_t Pipe_Write_PStream_BE(const void* const Buffer,\r
- uint16_t Length,\r
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);\r
- //@}\r
+ /* Architecture Includes: */\r
+ #if (ARCH == ARCH_AVR8)\r
+ #include "AVR8/PipeStream_AVR8.h"\r
+ #elif (ARCH == ARCH_UC3)\r
+ #include "UC3/PipeStream_UC3.h"\r
+ #endif\r
\r
/* Disable C linkage for C++ Compilers: */\r
#if defined(__cplusplus)\r
#endif\r
\r
/** @} */\r
-
+\r
projects / pub / USBasp.git / blobdiff