-# Doxyfile 1.5.7.1\r
-\r
-# This file describes the settings to be used by the documentation system\r
-# doxygen (www.doxygen.org) for a project\r
-#\r
-# All text after a hash (#) is considered a comment and will be ignored\r
-# The format is:\r
-# TAG = value [value, ...]\r
-# For lists items can also be appended using:\r
-# TAG += value [value, ...]\r
-# Values that contain spaces should be placed between quotes (" ")\r
-\r
-#---------------------------------------------------------------------------\r
-# Project related configuration options\r
-#---------------------------------------------------------------------------\r
-\r
-# This tag specifies the encoding used for all characters in the config file \r
-# that follow. The default is UTF-8 which is also the encoding used for all \r
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the \r
-# iconv built into libc) for the transcoding. See \r
-# http://www.gnu.org/software/libiconv for the list of possible encodings.\r
-\r
-DOXYFILE_ENCODING = UTF-8\r
-\r
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded \r
-# by quotes) that should identify the project.\r
-\r
-PROJECT_NAME = "LUFA Library - Joystick Device Demo"\r
-\r
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. \r
-# This could be handy for archiving the generated documentation or \r
-# if some version control system is used.\r
-\r
-PROJECT_NUMBER = 0.0.0\r
-\r
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) \r
-# base path where the generated documentation will be put. \r
-# If a relative path is entered, it will be relative to the location \r
-# where doxygen was started. If left blank the current directory will be used.\r
-\r
-OUTPUT_DIRECTORY = ./Documentation/\r
-\r
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create \r
-# 4096 sub-directories (in 2 levels) under the output directory of each output \r
-# format and will distribute the generated files over these directories. \r
-# Enabling this option can be useful when feeding doxygen a huge amount of \r
-# source files, where putting all generated files in the same directory would \r
-# otherwise cause performance problems for the file system.\r
-\r
-CREATE_SUBDIRS = YES\r
-\r
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all \r
-# documentation generated by doxygen is written. Doxygen will use this \r
-# information to generate all constant output in the proper language. \r
-# The default language is English, other supported languages are: \r
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, \r
-# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, \r
-# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), \r
-# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, \r
-# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, \r
-# Spanish, Swedish, and Ukrainian.\r
-\r
-OUTPUT_LANGUAGE = English\r
-\r
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will \r
-# include brief member descriptions after the members that are listed in \r
-# the file and class documentation (similar to JavaDoc). \r
-# Set to NO to disable this.\r
-\r
-BRIEF_MEMBER_DESC = YES\r
-\r
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend \r
-# the brief description of a member or function before the detailed description. \r
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the \r
-# brief descriptions will be completely suppressed.\r
-\r
-REPEAT_BRIEF = YES\r
-\r
-# This tag implements a quasi-intelligent brief description abbreviator \r
-# that is used to form the text in various listings. Each string \r
-# in this list, if found as the leading text of the brief description, will be \r
-# stripped from the text and the result after processing the whole list, is \r
-# used as the annotated text. Otherwise, the brief description is used as-is. \r
-# If left blank, the following values are used ("$name" is automatically \r
-# replaced with the name of the entity): "The $name class" "The $name widget" \r
-# "The $name file" "is" "provides" "specifies" "contains" \r
-# "represents" "a" "an" "the"\r
-\r
-ABBREVIATE_BRIEF = "The $name class" \\r
- "The $name widget" \\r
- "The $name file" \\r
- is \\r
- provides \\r
- specifies \\r
- contains \\r
- represents \\r
- a \\r
- an \\r
- the\r
-\r
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then \r
-# Doxygen will generate a detailed section even if there is only a brief \r
-# description.\r
-\r
-ALWAYS_DETAILED_SEC = NO\r
-\r
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all \r
-# inherited members of a class in the documentation of that class as if those \r
-# members were ordinary class members. Constructors, destructors and assignment \r
-# operators of the base classes will not be shown.\r
-\r
-INLINE_INHERITED_MEMB = NO\r
-\r
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full \r
-# path before files name in the file list and in the header files. If set \r
-# to NO the shortest path that makes the file name unique will be used.\r
-\r
-FULL_PATH_NAMES = YES\r
-\r
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag \r
-# can be used to strip a user-defined part of the path. Stripping is \r
-# only done if one of the specified strings matches the left-hand part of \r
-# the path. The tag can be used to show relative paths in the file list. \r
-# If left blank the directory from which doxygen is run is used as the \r
-# path to strip.\r
-\r
-STRIP_FROM_PATH = \r
-\r
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of \r
-# the path mentioned in the documentation of a class, which tells \r
-# the reader which header file to include in order to use a class. \r
-# If left blank only the name of the header file containing the class \r
-# definition is used. Otherwise one should specify the include paths that \r
-# are normally passed to the compiler using the -I flag.\r
-\r
-STRIP_FROM_INC_PATH = \r
-\r
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter \r
-# (but less readable) file names. This can be useful is your file systems \r
-# doesn't support long names like on DOS, Mac, or CD-ROM.\r
-\r
-SHORT_NAMES = YES\r
-\r
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen \r
-# will interpret the first line (until the first dot) of a JavaDoc-style \r
-# comment as the brief description. If set to NO, the JavaDoc \r
-# comments will behave just like regular Qt-style comments \r
-# (thus requiring an explicit @brief command for a brief description.)\r
-\r
-JAVADOC_AUTOBRIEF = NO\r
-\r
-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will \r
-# interpret the first line (until the first dot) of a Qt-style \r
-# comment as the brief description. If set to NO, the comments \r
-# will behave just like regular Qt-style comments (thus requiring \r
-# an explicit \brief command for a brief description.)\r
-\r
-QT_AUTOBRIEF = NO\r
-\r
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen \r
-# treat a multi-line C++ special comment block (i.e. a block of //! or /// \r
-# comments) as a brief description. This used to be the default behaviour. \r
-# The new default is to treat a multi-line C++ comment block as a detailed \r
-# description. Set this tag to YES if you prefer the old behaviour instead.\r
-\r
-MULTILINE_CPP_IS_BRIEF = NO\r
-\r
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented \r
-# member inherits the documentation from any documented member that it \r
-# re-implements.\r
-\r
-INHERIT_DOCS = YES\r
-\r
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce \r
-# a new page for each member. If set to NO, the documentation of a member will \r
-# be part of the file/class/namespace that contains it.\r
-\r
-SEPARATE_MEMBER_PAGES = NO\r
-\r
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. \r
-# Doxygen uses this value to replace tabs by spaces in code fragments.\r
-\r
-TAB_SIZE = 4\r
-\r
-# This tag can be used to specify a number of aliases that acts \r
-# as commands in the documentation. An alias has the form "name=value". \r
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to \r
-# put the command \sideeffect (or @sideeffect) in the documentation, which \r
-# will result in a user-defined paragraph with heading "Side Effects:". \r
-# You can put \n's in the value part of an alias to insert newlines.\r
-\r
-ALIASES = \r
-\r
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C \r
-# sources only. Doxygen will then generate output that is more tailored for C. \r
-# For instance, some of the names that are used will be different. The list \r
-# of all members will be omitted, etc.\r
-\r
-OPTIMIZE_OUTPUT_FOR_C = YES\r
-\r
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java \r
-# sources only. Doxygen will then generate output that is more tailored for \r
-# Java. For instance, namespaces will be presented as packages, qualified \r
-# scopes will look different, etc.\r
-\r
-OPTIMIZE_OUTPUT_JAVA = NO\r
-\r
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran \r
-# sources only. Doxygen will then generate output that is more tailored for \r
-# Fortran.\r
-\r
-OPTIMIZE_FOR_FORTRAN = NO\r
-\r
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL \r
-# sources. Doxygen will then generate output that is tailored for \r
-# VHDL.\r
-\r
-OPTIMIZE_OUTPUT_VHDL = NO\r
-\r
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want \r
-# to include (a tag file for) the STL sources as input, then you should \r
-# set this tag to YES in order to let doxygen match functions declarations and \r
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. \r
-# func(std::string) {}). This also make the inheritance and collaboration \r
-# diagrams that involve STL classes more complete and accurate.\r
-\r
-BUILTIN_STL_SUPPORT = NO\r
-\r
-# If you use Microsoft's C++/CLI language, you should set this option to YES to\r
-# enable parsing support.\r
-\r
-CPP_CLI_SUPPORT = NO\r
-\r
-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. \r
-# Doxygen will parse them like normal C++ but will assume all classes use public \r
-# instead of private inheritance when no explicit protection keyword is present.\r
-\r
-SIP_SUPPORT = NO\r
-\r
-# For Microsoft's IDL there are propget and propput attributes to indicate getter \r
-# and setter methods for a property. Setting this option to YES (the default) \r
-# will make doxygen to replace the get and set methods by a property in the \r
-# documentation. This will only work if the methods are indeed getting or \r
-# setting a simple type. If this is not the case, or you want to show the \r
-# methods anyway, you should set this option to NO.\r
-\r
-IDL_PROPERTY_SUPPORT = YES\r
-\r
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC \r
-# tag is set to YES, then doxygen will reuse the documentation of the first \r
-# member in the group (if any) for the other members of the group. By default \r
-# all members of a group must be documented explicitly.\r
-\r
-DISTRIBUTE_GROUP_DOC = NO\r
-\r
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of \r
-# the same type (for instance a group of public functions) to be put as a \r
-# subgroup of that type (e.g. under the Public Functions section). Set it to \r
-# NO to prevent subgrouping. Alternatively, this can be done per class using \r
-# the \nosubgrouping command.\r
-\r
-SUBGROUPING = YES\r
-\r
-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum \r
-# is documented as struct, union, or enum with the name of the typedef. So \r
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct \r
-# with name TypeT. When disabled the typedef will appear as a member of a file, \r
-# namespace, or class. And the struct will be named TypeS. This can typically \r
-# be useful for C code in case the coding convention dictates that all compound \r
-# types are typedef'ed and only the typedef is referenced, never the tag name.\r
-\r
-TYPEDEF_HIDES_STRUCT = NO\r
-\r
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to \r
-# determine which symbols to keep in memory and which to flush to disk.\r
-# When the cache is full, less often used symbols will be written to disk.\r
-# For small to medium size projects (<1000 input files) the default value is \r
-# probably good enough. For larger projects a too small cache size can cause \r
-# doxygen to be busy swapping symbols to and from disk most of the time \r
-# causing a significant performance penality. \r
-# If the system has enough physical memory increasing the cache will improve the \r
-# performance by keeping more symbols in memory. Note that the value works on \r
-# a logarithmic scale so increasing the size by one will rougly double the \r
-# memory usage. The cache size is given by this formula: \r
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, \r
-# corresponding to a cache size of 2^16 = 65536 symbols\r
-\r
-SYMBOL_CACHE_SIZE = 0\r
-\r
-#---------------------------------------------------------------------------\r
-# Build related configuration options\r
-#---------------------------------------------------------------------------\r
-\r
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in \r
-# documentation are documented, even if no documentation was available. \r
-# Private class members and static file members will be hidden unless \r
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES\r
-\r
-EXTRACT_ALL = YES\r
-\r
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class \r
-# will be included in the documentation.\r
-\r
-EXTRACT_PRIVATE = YES\r
-\r
-# If the EXTRACT_STATIC tag is set to YES all static members of a file \r
-# will be included in the documentation.\r
-\r
-EXTRACT_STATIC = YES\r
-\r
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) \r
-# defined locally in source files will be included in the documentation. \r
-# If set to NO only classes defined in header files are included.\r
-\r
-EXTRACT_LOCAL_CLASSES = YES\r
-\r
-# This flag is only useful for Objective-C code. When set to YES local \r
-# methods, which are defined in the implementation section but not in \r
-# the interface are included in the documentation. \r
-# If set to NO (the default) only methods in the interface are included.\r
-\r
-EXTRACT_LOCAL_METHODS = NO\r
-\r
-# If this flag is set to YES, the members of anonymous namespaces will be \r
-# extracted and appear in the documentation as a namespace called \r
-# 'anonymous_namespace{file}', where file will be replaced with the base \r
-# name of the file that contains the anonymous namespace. By default \r
-# anonymous namespace are hidden.\r
-\r
-EXTRACT_ANON_NSPACES = NO\r
-\r
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all \r
-# undocumented members of documented classes, files or namespaces. \r
-# If set to NO (the default) these members will be included in the \r
-# various overviews, but no documentation section is generated. \r
-# This option has no effect if EXTRACT_ALL is enabled.\r
-\r
-HIDE_UNDOC_MEMBERS = NO\r
-\r
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all \r
-# undocumented classes that are normally visible in the class hierarchy. \r
-# If set to NO (the default) these classes will be included in the various \r
-# overviews. This option has no effect if EXTRACT_ALL is enabled.\r
-\r
-HIDE_UNDOC_CLASSES = NO\r
-\r
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all \r
-# friend (class|struct|union) declarations. \r
-# If set to NO (the default) these declarations will be included in the \r
-# documentation.\r
-\r
-HIDE_FRIEND_COMPOUNDS = NO\r
-\r
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any \r
-# documentation blocks found inside the body of a function. \r
-# If set to NO (the default) these blocks will be appended to the \r
-# function's detailed documentation block.\r
-\r
-HIDE_IN_BODY_DOCS = NO\r
-\r
-# The INTERNAL_DOCS tag determines if documentation \r
-# that is typed after a \internal command is included. If the tag is set \r
-# to NO (the default) then the documentation will be excluded. \r
-# Set it to YES to include the internal documentation.\r
-\r
-INTERNAL_DOCS = NO\r
-\r
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate \r
-# file names in lower-case letters. If set to YES upper-case letters are also \r
-# allowed. This is useful if you have classes or files whose names only differ \r
-# in case and if your file system supports case sensitive file names. Windows \r
-# and Mac users are advised to set this option to NO.\r
-\r
-CASE_SENSE_NAMES = NO\r
-\r
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen \r
-# will show members with their full class and namespace scopes in the \r
-# documentation. If set to YES the scope will be hidden.\r
-\r
-HIDE_SCOPE_NAMES = NO\r
-\r
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen \r
-# will put a list of the files that are included by a file in the documentation \r
-# of that file.\r
-\r
-SHOW_INCLUDE_FILES = YES\r
-\r
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] \r
-# is inserted in the documentation for inline members.\r
-\r
-INLINE_INFO = YES\r
-\r
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen \r
-# will sort the (detailed) documentation of file and class members \r
-# alphabetically by member name. If set to NO the members will appear in \r
-# declaration order.\r
-\r
-SORT_MEMBER_DOCS = YES\r
-\r
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the \r
-# brief documentation of file, namespace and class members alphabetically \r
-# by member name. If set to NO (the default) the members will appear in \r
-# declaration order.\r
-\r
-SORT_BRIEF_DOCS = NO\r
-\r
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the \r
-# hierarchy of group names into alphabetical order. If set to NO (the default) \r
-# the group names will appear in their defined order.\r
-\r
-SORT_GROUP_NAMES = NO\r
-\r
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be \r
-# sorted by fully-qualified names, including namespaces. If set to \r
-# NO (the default), the class list will be sorted only by class name, \r
-# not including the namespace part. \r
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.\r
-# Note: This option applies only to the class list, not to the \r
-# alphabetical list.\r
-\r
-SORT_BY_SCOPE_NAME = NO\r
-\r
-# The GENERATE_TODOLIST tag can be used to enable (YES) or \r
-# disable (NO) the todo list. This list is created by putting \todo \r
-# commands in the documentation.\r
-\r
-GENERATE_TODOLIST = NO\r
-\r
-# The GENERATE_TESTLIST tag can be used to enable (YES) or \r
-# disable (NO) the test list. This list is created by putting \test \r
-# commands in the documentation.\r
-\r
-GENERATE_TESTLIST = NO\r
-\r
-# The GENERATE_BUGLIST tag can be used to enable (YES) or \r
-# disable (NO) the bug list. This list is created by putting \bug \r
-# commands in the documentation.\r
-\r
-GENERATE_BUGLIST = NO\r
-\r
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or \r
-# disable (NO) the deprecated list. This list is created by putting \r
-# \deprecated commands in the documentation.\r
-\r
-GENERATE_DEPRECATEDLIST= YES\r
-\r
-# The ENABLED_SECTIONS tag can be used to enable conditional \r
-# documentation sections, marked by \if sectionname ... \endif.\r
-\r
-ENABLED_SECTIONS = \r
-\r
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines \r
-# the initial value of a variable or define consists of for it to appear in \r
-# the documentation. If the initializer consists of more lines than specified \r
-# here it will be hidden. Use a value of 0 to hide initializers completely. \r
-# The appearance of the initializer of individual variables and defines in the \r
-# documentation can be controlled using \showinitializer or \hideinitializer \r
-# command in the documentation regardless of this setting.\r
-\r
-MAX_INITIALIZER_LINES = 30\r
-\r
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated \r
-# at the bottom of the documentation of classes and structs. If set to YES the \r
-# list will mention the files that were used to generate the documentation.\r
-\r
-SHOW_USED_FILES = YES\r
-\r
-# If the sources in your project are distributed over multiple directories \r
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy \r
-# in the documentation. The default is NO.\r
-\r
-SHOW_DIRECTORIES = YES\r
-\r
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.\r
-# This will remove the Files entry from the Quick Index and from the \r
-# Folder Tree View (if specified). The default is YES.\r
-\r
-SHOW_FILES = YES\r
-\r
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the \r
-# Namespaces page. This will remove the Namespaces entry from the Quick Index\r
-# and from the Folder Tree View (if specified). The default is YES.\r
-\r
-SHOW_NAMESPACES = YES\r
-\r
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that \r
-# doxygen should invoke to get the current version for each file (typically from \r
-# the version control system). Doxygen will invoke the program by executing (via \r
-# popen()) the command <command> <input-file>, where <command> is the value of \r
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file \r
-# provided by doxygen. Whatever the program writes to standard output \r
-# is used as the file version. See the manual for examples.\r
-\r
-FILE_VERSION_FILTER = \r
-\r
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by \r
-# doxygen. The layout file controls the global structure of the generated output files \r
-# in an output format independent way. The create the layout file that represents \r
-# doxygen's defaults, run doxygen with the -l option. You can optionally specify a \r
-# file name after the option, if omitted DoxygenLayout.xml will be used as the name \r
-# of the layout file.\r
-\r
-LAYOUT_FILE = \r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to warning and progress messages\r
-#---------------------------------------------------------------------------\r
-\r
-# The QUIET tag can be used to turn on/off the messages that are generated \r
-# by doxygen. Possible values are YES and NO. If left blank NO is used.\r
-\r
-QUIET = YES\r
-\r
-# The WARNINGS tag can be used to turn on/off the warning messages that are \r
-# generated by doxygen. Possible values are YES and NO. If left blank \r
-# NO is used.\r
-\r
-WARNINGS = YES\r
-\r
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings \r
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will \r
-# automatically be disabled.\r
-\r
-WARN_IF_UNDOCUMENTED = YES\r
-\r
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for \r
-# potential errors in the documentation, such as not documenting some \r
-# parameters in a documented function, or documenting parameters that \r
-# don't exist or using markup commands wrongly.\r
-\r
-WARN_IF_DOC_ERROR = YES\r
-\r
-# This WARN_NO_PARAMDOC option can be abled to get warnings for \r
-# functions that are documented, but have no documentation for their parameters \r
-# or return value. If set to NO (the default) doxygen will only warn about \r
-# wrong or incomplete parameter documentation, but not about the absence of \r
-# documentation.\r
-\r
-WARN_NO_PARAMDOC = YES\r
-\r
-# The WARN_FORMAT tag determines the format of the warning messages that \r
-# doxygen can produce. The string should contain the $file, $line, and $text \r
-# tags, which will be replaced by the file and line number from which the \r
-# warning originated and the warning text. Optionally the format may contain \r
-# $version, which will be replaced by the version of the file (if it could \r
-# be obtained via FILE_VERSION_FILTER)\r
-\r
-WARN_FORMAT = "$file:$line: $text"\r
-\r
-# The WARN_LOGFILE tag can be used to specify a file to which warning \r
-# and error messages should be written. If left blank the output is written \r
-# to stderr.\r
-\r
-WARN_LOGFILE = \r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the input files\r
-#---------------------------------------------------------------------------\r
-\r
-# The INPUT tag can be used to specify the files and/or directories that contain \r
-# documented source files. You may enter file names like "myfile.cpp" or \r
-# directories like "/usr/src/myproject". Separate the files or directories \r
-# with spaces.\r
-\r
-INPUT = ./\r
-\r
-# This tag can be used to specify the character encoding of the source files \r
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is \r
-# also the default input encoding. Doxygen uses libiconv (or the iconv built \r
-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for \r
-# the list of possible encodings.\r
-\r
-INPUT_ENCODING = UTF-8\r
-\r
-# If the value of the INPUT tag contains directories, you can use the \r
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp \r
-# and *.h) to filter out the source-files in the directories. If left \r
-# blank the following patterns are tested: \r
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx \r
-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90\r
-\r
-FILE_PATTERNS = *.h \\r
- *.c \\r
- *.txt\r
-\r
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories \r
-# should be searched for input files as well. Possible values are YES and NO. \r
-# If left blank NO is used.\r
-\r
-RECURSIVE = YES\r
-\r
-# The EXCLUDE tag can be used to specify files and/or directories that should \r
-# excluded from the INPUT source files. This way you can easily exclude a \r
-# subdirectory from a directory tree whose root is specified with the INPUT tag.\r
-\r
-EXCLUDE = Documentation/\r
-\r
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or \r
-# directories that are symbolic links (a Unix filesystem feature) are excluded \r
-# from the input.\r
-\r
-EXCLUDE_SYMLINKS = NO\r
-\r
-# If the value of the INPUT tag contains directories, you can use the \r
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude \r
-# certain files from those directories. Note that the wildcards are matched \r
-# against the file with absolute path, so to exclude all test directories \r
-# for example use the pattern */test/*\r
-\r
-EXCLUDE_PATTERNS = */LowLevel/USBMode.h\r
-\r
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names \r
-# (namespaces, classes, functions, etc.) that should be excluded from the \r
-# output. The symbol name can be a fully qualified name, a word, or if the \r
-# wildcard * is used, a substring. Examples: ANamespace, AClass, \r
-# AClass::ANamespace, ANamespace::*Test\r
-\r
-EXCLUDE_SYMBOLS = __*\r
-\r
-# The EXAMPLE_PATH tag can be used to specify one or more files or \r
-# directories that contain example code fragments that are included (see \r
-# the \include command).\r
-\r
-EXAMPLE_PATH = \r
-\r
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the \r
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp \r
-# and *.h) to filter out the source-files in the directories. If left \r
-# blank all files are included.\r
-\r
-EXAMPLE_PATTERNS = *\r
-\r
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be \r
-# searched for input files to be used with the \include or \dontinclude \r
-# commands irrespective of the value of the RECURSIVE tag. \r
-# Possible values are YES and NO. If left blank NO is used.\r
-\r
-EXAMPLE_RECURSIVE = NO\r
-\r
-# The IMAGE_PATH tag can be used to specify one or more files or \r
-# directories that contain image that are included in the documentation (see \r
-# the \image command).\r
-\r
-IMAGE_PATH = \r
-\r
-# The INPUT_FILTER tag can be used to specify a program that doxygen should \r
-# invoke to filter for each input file. Doxygen will invoke the filter program \r
-# by executing (via popen()) the command <filter> <input-file>, where <filter> \r
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an \r
-# input file. Doxygen will then use the output that the filter program writes \r
-# to standard output. If FILTER_PATTERNS is specified, this tag will be \r
-# ignored.\r
-\r
-INPUT_FILTER = \r
-\r
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern \r
-# basis. Doxygen will compare the file name with each pattern and apply the \r
-# filter if there is a match. The filters are a list of the form: \r
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further \r
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER \r
-# is applied to all files.\r
-\r
-FILTER_PATTERNS = \r
-\r
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using \r
-# INPUT_FILTER) will be used to filter the input files when producing source \r
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).\r
-\r
-FILTER_SOURCE_FILES = NO\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to source browsing\r
-#---------------------------------------------------------------------------\r
-\r
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will \r
-# be generated. Documented entities will be cross-referenced with these sources. \r
-# Note: To get rid of all source code in the generated output, make sure also \r
-# VERBATIM_HEADERS is set to NO.\r
-\r
-SOURCE_BROWSER = NO\r
-\r
-# Setting the INLINE_SOURCES tag to YES will include the body \r
-# of functions and classes directly in the documentation.\r
-\r
-INLINE_SOURCES = NO\r
-\r
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct \r
-# doxygen to hide any special comment blocks from generated source code \r
-# fragments. Normal C and C++ comments will always remain visible.\r
-\r
-STRIP_CODE_COMMENTS = YES\r
-\r
-# If the REFERENCED_BY_RELATION tag is set to YES \r
-# then for each documented function all documented \r
-# functions referencing it will be listed.\r
-\r
-REFERENCED_BY_RELATION = NO\r
-\r
-# If the REFERENCES_RELATION tag is set to YES \r
-# then for each documented function all documented entities \r
-# called/used by that function will be listed.\r
-\r
-REFERENCES_RELATION = NO\r
-\r
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)\r
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from\r
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will\r
-# link to the source code. Otherwise they will link to the documentstion.\r
-\r
-REFERENCES_LINK_SOURCE = NO\r
-\r
-# If the USE_HTAGS tag is set to YES then the references to source code \r
-# will point to the HTML generated by the htags(1) tool instead of doxygen \r
-# built-in source browser. The htags tool is part of GNU's global source \r
-# tagging system (see http://www.gnu.org/software/global/global.html). You \r
-# will need version 4.8.6 or higher.\r
-\r
-USE_HTAGS = NO\r
-\r
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen \r
-# will generate a verbatim copy of the header file for each class for \r
-# which an include is specified. Set to NO to disable this.\r
-\r
-VERBATIM_HEADERS = NO\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the alphabetical class index\r
-#---------------------------------------------------------------------------\r
-\r
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index \r
-# of all compounds will be generated. Enable this if the project \r
-# contains a lot of classes, structs, unions or interfaces.\r
-\r
-ALPHABETICAL_INDEX = YES\r
-\r
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then \r
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns \r
-# in which this list will be split (can be a number in the range [1..20])\r
-\r
-COLS_IN_ALPHA_INDEX = 5\r
-\r
-# In case all classes in a project start with a common prefix, all \r
-# classes will be put under the same header in the alphabetical index. \r
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that \r
-# should be ignored while generating the index headers.\r
-\r
-IGNORE_PREFIX = \r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the HTML output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will \r
-# generate HTML output.\r
-\r
-GENERATE_HTML = YES\r
-\r
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. \r
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
-# put in front of it. If left blank `html' will be used as the default path.\r
-\r
-HTML_OUTPUT = html\r
-\r
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for \r
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank \r
-# doxygen will generate files with .html extension.\r
-\r
-HTML_FILE_EXTENSION = .html\r
-\r
-# The HTML_HEADER tag can be used to specify a personal HTML header for \r
-# each generated HTML page. If it is left blank doxygen will generate a \r
-# standard header.\r
-\r
-HTML_HEADER = \r
-\r
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for \r
-# each generated HTML page. If it is left blank doxygen will generate a \r
-# standard footer.\r
-\r
-HTML_FOOTER = \r
-\r
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading \r
-# style sheet that is used by each HTML page. It can be used to \r
-# fine-tune the look of the HTML output. If the tag is left blank doxygen \r
-# will generate a default style sheet. Note that doxygen will try to copy \r
-# the style sheet file to the HTML output directory, so don't put your own \r
-# stylesheet in the HTML output directory as well, or it will be erased!\r
-\r
-HTML_STYLESHEET = \r
-\r
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, \r
-# files or namespaces will be aligned in HTML using tables. If set to \r
-# NO a bullet list will be used.\r
-\r
-HTML_ALIGN_MEMBERS = YES\r
-\r
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML \r
-# documentation will contain sections that can be hidden and shown after the \r
-# page has loaded. For this to work a browser that supports \r
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox \r
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).\r
-\r
-HTML_DYNAMIC_SECTIONS = YES\r
-\r
-# If the GENERATE_DOCSET tag is set to YES, additional index files \r
-# will be generated that can be used as input for Apple's Xcode 3 \r
-# integrated development environment, introduced with OSX 10.5 (Leopard). \r
-# To create a documentation set, doxygen will generate a Makefile in the \r
-# HTML output directory. Running make will produce the docset in that \r
-# directory and running "make install" will install the docset in \r
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find \r
-# it at startup. \r
-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.\r
-\r
-GENERATE_DOCSET = NO\r
-\r
-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the \r
-# feed. A documentation feed provides an umbrella under which multiple \r
-# documentation sets from a single provider (such as a company or product suite) \r
-# can be grouped.\r
-\r
-DOCSET_FEEDNAME = "Doxygen generated docs"\r
-\r
-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that \r
-# should uniquely identify the documentation set bundle. This should be a \r
-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen \r
-# will append .docset to the name.\r
-\r
-DOCSET_BUNDLE_ID = org.doxygen.Project\r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files \r
-# will be generated that can be used as input for tools like the \r
-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) \r
-# of the generated HTML documentation.\r
-\r
-GENERATE_HTMLHELP = NO\r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can \r
-# be used to specify the file name of the resulting .chm file. You \r
-# can add a path in front of the file if the result should not be \r
-# written to the html output directory.\r
-\r
-CHM_FILE = \r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can \r
-# be used to specify the location (absolute path including file name) of \r
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run \r
-# the HTML help compiler on the generated index.hhp.\r
-\r
-HHC_LOCATION = \r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag \r
-# controls if a separate .chi index file is generated (YES) or that \r
-# it should be included in the master .chm file (NO).\r
-\r
-GENERATE_CHI = NO\r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING\r
-# is used to encode HtmlHelp index (hhk), content (hhc) and project file\r
-# content.\r
-\r
-CHM_INDEX_ENCODING = \r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag \r
-# controls whether a binary table of contents is generated (YES) or a \r
-# normal table of contents (NO) in the .chm file.\r
-\r
-BINARY_TOC = NO\r
-\r
-# The TOC_EXPAND flag can be set to YES to add extra items for group members \r
-# to the contents of the HTML help documentation and to the tree view.\r
-\r
-TOC_EXPAND = YES\r
-\r
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER \r
-# are set, an additional index file will be generated that can be used as input for \r
-# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated \r
-# HTML documentation.\r
-\r
-GENERATE_QHP = NO\r
-\r
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can \r
-# be used to specify the file name of the resulting .qch file. \r
-# The path specified is relative to the HTML output folder.\r
-\r
-QCH_FILE = \r
-\r
-# The QHP_NAMESPACE tag specifies the namespace to use when generating \r
-# Qt Help Project output. For more information please see \r
-# <a href="http://doc.trolltech.com/qthelpproject.html#namespace">Qt Help Project / Namespace</a>.\r
-\r
-QHP_NAMESPACE = org.doxygen.Project\r
-\r
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating \r
-# Qt Help Project output. For more information please see \r
-# <a href="http://doc.trolltech.com/qthelpproject.html#virtual-folders">Qt Help Project / Virtual Folders</a>.\r
-\r
-QHP_VIRTUAL_FOLDER = doc\r
-\r
-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can \r
-# be used to specify the location of Qt's qhelpgenerator. \r
-# If non-empty doxygen will try to run qhelpgenerator on the generated \r
-# .qhp file .\r
-\r
-QHG_LOCATION = \r
-\r
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at \r
-# top of each HTML page. The value NO (the default) enables the index and \r
-# the value YES disables it.\r
-\r
-DISABLE_INDEX = NO\r
-\r
-# This tag can be used to set the number of enum values (range [1..20]) \r
-# that doxygen will group on one line in the generated HTML documentation.\r
-\r
-ENUM_VALUES_PER_LINE = 1\r
-\r
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index\r
-# structure should be generated to display hierarchical information.\r
-# If the tag value is set to FRAME, a side panel will be generated\r
-# containing a tree-like index structure (just like the one that \r
-# is generated for HTML Help). For this to work a browser that supports \r
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, \r
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are \r
-# probably better off using the HTML help feature. Other possible values \r
-# for this tag are: HIERARCHIES, which will generate the Groups, Directories,\r
-# and Class Hierarchy pages using a tree view instead of an ordered list;\r
-# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which\r
-# disables this behavior completely. For backwards compatibility with previous\r
-# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE\r
-# respectively.\r
-\r
-GENERATE_TREEVIEW = YES\r
-\r
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be \r
-# used to set the initial width (in pixels) of the frame in which the tree \r
-# is shown.\r
-\r
-TREEVIEW_WIDTH = 250\r
-\r
-# Use this tag to change the font size of Latex formulas included \r
-# as images in the HTML documentation. The default is 10. Note that \r
-# when you change the font size after a successful doxygen run you need \r
-# to manually remove any form_*.png images from the HTML output directory \r
-# to force them to be regenerated.\r
-\r
-FORMULA_FONTSIZE = 10\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the LaTeX output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will \r
-# generate Latex output.\r
-\r
-GENERATE_LATEX = NO\r
-\r
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. \r
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
-# put in front of it. If left blank `latex' will be used as the default path.\r
-\r
-LATEX_OUTPUT = latex\r
-\r
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be \r
-# invoked. If left blank `latex' will be used as the default command name.\r
-\r
-LATEX_CMD_NAME = latex\r
-\r
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to \r
-# generate index for LaTeX. If left blank `makeindex' will be used as the \r
-# default command name.\r
-\r
-MAKEINDEX_CMD_NAME = makeindex\r
-\r
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact \r
-# LaTeX documents. This may be useful for small projects and may help to \r
-# save some trees in general.\r
-\r
-COMPACT_LATEX = NO\r
-\r
-# The PAPER_TYPE tag can be used to set the paper type that is used \r
-# by the printer. Possible values are: a4, a4wide, letter, legal and \r
-# executive. If left blank a4wide will be used.\r
-\r
-PAPER_TYPE = a4wide\r
-\r
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX \r
-# packages that should be included in the LaTeX output.\r
-\r
-EXTRA_PACKAGES = \r
-\r
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for \r
-# the generated latex document. The header should contain everything until \r
-# the first chapter. If it is left blank doxygen will generate a \r
-# standard header. Notice: only use this tag if you know what you are doing!\r
-\r
-LATEX_HEADER = \r
-\r
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated \r
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will \r
-# contain links (just like the HTML output) instead of page references \r
-# This makes the output suitable for online browsing using a pdf viewer.\r
-\r
-PDF_HYPERLINKS = YES\r
-\r
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of \r
-# plain latex in the generated Makefile. Set this option to YES to get a \r
-# higher quality PDF documentation.\r
-\r
-USE_PDFLATEX = YES\r
-\r
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. \r
-# command to the generated LaTeX files. This will instruct LaTeX to keep \r
-# running if errors occur, instead of asking the user for help. \r
-# This option is also used when generating formulas in HTML.\r
-\r
-LATEX_BATCHMODE = NO\r
-\r
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not \r
-# include the index chapters (such as File Index, Compound Index, etc.) \r
-# in the output.\r
-\r
-LATEX_HIDE_INDICES = NO\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the RTF output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output \r
-# The RTF output is optimized for Word 97 and may not look very pretty with \r
-# other RTF readers or editors.\r
-\r
-GENERATE_RTF = NO\r
-\r
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. \r
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
-# put in front of it. If left blank `rtf' will be used as the default path.\r
-\r
-RTF_OUTPUT = rtf\r
-\r
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact \r
-# RTF documents. This may be useful for small projects and may help to \r
-# save some trees in general.\r
-\r
-COMPACT_RTF = NO\r
-\r
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated \r
-# will contain hyperlink fields. The RTF file will \r
-# contain links (just like the HTML output) instead of page references. \r
-# This makes the output suitable for online browsing using WORD or other \r
-# programs which support those fields. \r
-# Note: wordpad (write) and others do not support links.\r
-\r
-RTF_HYPERLINKS = NO\r
-\r
-# Load stylesheet definitions from file. Syntax is similar to doxygen's \r
-# config file, i.e. a series of assignments. You only have to provide \r
-# replacements, missing definitions are set to their default value.\r
-\r
-RTF_STYLESHEET_FILE = \r
-\r
-# Set optional variables used in the generation of an rtf document. \r
-# Syntax is similar to doxygen's config file.\r
-\r
-RTF_EXTENSIONS_FILE = \r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the man page output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will \r
-# generate man pages\r
-\r
-GENERATE_MAN = NO\r
-\r
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. \r
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
-# put in front of it. If left blank `man' will be used as the default path.\r
-\r
-MAN_OUTPUT = man\r
-\r
-# The MAN_EXTENSION tag determines the extension that is added to \r
-# the generated man pages (default is the subroutine's section .3)\r
-\r
-MAN_EXTENSION = .3\r
-\r
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output, \r
-# then it will generate one additional man file for each entity \r
-# documented in the real man page(s). These additional files \r
-# only source the real man page, but without them the man command \r
-# would be unable to find the correct page. The default is NO.\r
-\r
-MAN_LINKS = NO\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the XML output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_XML tag is set to YES Doxygen will \r
-# generate an XML file that captures the structure of \r
-# the code including all documentation.\r
-\r
-GENERATE_XML = NO\r
-\r
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. \r
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
-# put in front of it. If left blank `xml' will be used as the default path.\r
-\r
-XML_OUTPUT = xml\r
-\r
-# The XML_SCHEMA tag can be used to specify an XML schema, \r
-# which can be used by a validating XML parser to check the \r
-# syntax of the XML files.\r
-\r
-XML_SCHEMA = \r
-\r
-# The XML_DTD tag can be used to specify an XML DTD, \r
-# which can be used by a validating XML parser to check the \r
-# syntax of the XML files.\r
-\r
-XML_DTD = \r
-\r
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will \r
-# dump the program listings (including syntax highlighting \r
-# and cross-referencing information) to the XML output. Note that \r
-# enabling this will significantly increase the size of the XML output.\r
-\r
-XML_PROGRAMLISTING = YES\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options for the AutoGen Definitions output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will \r
-# generate an AutoGen Definitions (see autogen.sf.net) file \r
-# that captures the structure of the code including all \r
-# documentation. Note that this feature is still experimental \r
-# and incomplete at the moment.\r
-\r
-GENERATE_AUTOGEN_DEF = NO\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the Perl module output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will \r
-# generate a Perl module file that captures the structure of \r
-# the code including all documentation. Note that this \r
-# feature is still experimental and incomplete at the \r
-# moment.\r
-\r
-GENERATE_PERLMOD = NO\r
-\r
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate \r
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able \r
-# to generate PDF and DVI output from the Perl module output.\r
-\r
-PERLMOD_LATEX = NO\r
-\r
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be \r
-# nicely formatted so it can be parsed by a human reader. This is useful \r
-# if you want to understand what is going on. On the other hand, if this \r
-# tag is set to NO the size of the Perl module output will be much smaller \r
-# and Perl will parse it just the same.\r
-\r
-PERLMOD_PRETTY = YES\r
-\r
-# The names of the make variables in the generated doxyrules.make file \r
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. \r
-# This is useful so different doxyrules.make files included by the same \r
-# Makefile don't overwrite each other's variables.\r
-\r
-PERLMOD_MAKEVAR_PREFIX = \r
-\r
-#---------------------------------------------------------------------------\r
-# Configuration options related to the preprocessor \r
-#---------------------------------------------------------------------------\r
-\r
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will \r
-# evaluate all C-preprocessor directives found in the sources and include \r
-# files.\r
-\r
-ENABLE_PREPROCESSING = YES\r
-\r
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro \r
-# names in the source code. If set to NO (the default) only conditional \r
-# compilation will be performed. Macro expansion can be done in a controlled \r
-# way by setting EXPAND_ONLY_PREDEF to YES.\r
-\r
-MACRO_EXPANSION = YES\r
-\r
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES \r
-# then the macro expansion is limited to the macros specified with the \r
-# PREDEFINED and EXPAND_AS_DEFINED tags.\r
-\r
-EXPAND_ONLY_PREDEF = YES\r
-\r
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files \r
-# in the INCLUDE_PATH (see below) will be search if a #include is found.\r
-\r
-SEARCH_INCLUDES = YES\r
-\r
-# The INCLUDE_PATH tag can be used to specify one or more directories that \r
-# contain include files that are not input files but should be processed by \r
-# the preprocessor.\r
-\r
-INCLUDE_PATH = \r
-\r
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard \r
-# patterns (like *.h and *.hpp) to filter out the header-files in the \r
-# directories. If left blank, the patterns specified with FILE_PATTERNS will \r
-# be used.\r
-\r
-INCLUDE_FILE_PATTERNS = \r
-\r
-# The PREDEFINED tag can be used to specify one or more macro names that \r
-# are defined before the preprocessor is started (similar to the -D option of \r
-# gcc). The argument of the tag is a list of macros of the form: name \r
-# or name=definition (no spaces). If the definition and the = are \r
-# omitted =1 is assumed. To prevent a macro definition from being \r
-# undefined via #undef or recursively expanded use the := operator \r
-# instead of the = operator.\r
-\r
-PREDEFINED = __DOXYGEN__\r
-\r
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then \r
-# this tag can be used to specify a list of macro names that should be expanded. \r
-# The macro definition that is found in the sources will be used. \r
-# Use the PREDEFINED tag if you want to use a different macro definition.\r
-\r
-EXPAND_AS_DEFINED = BUTTLOADTAG\r
-\r
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then \r
-# doxygen's preprocessor will remove all function-like macros that are alone \r
-# on a line, have an all uppercase name, and do not end with a semicolon. Such \r
-# function macros are typically used for boiler-plate code, and will confuse \r
-# the parser if not removed.\r
-\r
-SKIP_FUNCTION_MACROS = YES\r
-\r
-#---------------------------------------------------------------------------\r
-# Configuration::additions related to external references \r
-#---------------------------------------------------------------------------\r
-\r
-# The TAGFILES option can be used to specify one or more tagfiles. \r
-# Optionally an initial location of the external documentation \r
-# can be added for each tagfile. The format of a tag file without \r
-# this location is as follows: \r
-# TAGFILES = file1 file2 ... \r
-# Adding location for the tag files is done as follows: \r
-# TAGFILES = file1=loc1 "file2 = loc2" ... \r
-# where "loc1" and "loc2" can be relative or absolute paths or \r
-# URLs. If a location is present for each tag, the installdox tool \r
-# does not have to be run to correct the links.\r
-# Note that each tag file must have a unique name\r
-# (where the name does NOT include the path)\r
-# If a tag file is not located in the directory in which doxygen \r
-# is run, you must also specify the path to the tagfile here.\r
-\r
-TAGFILES = \r
-\r
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create \r
-# a tag file that is based on the input files it reads.\r
-\r
-GENERATE_TAGFILE = \r
-\r
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed \r
-# in the class index. If set to NO only the inherited external classes \r
-# will be listed.\r
-\r
-ALLEXTERNALS = NO\r
-\r
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed \r
-# in the modules index. If set to NO, only the current project's groups will \r
-# be listed.\r
-\r
-EXTERNAL_GROUPS = YES\r
-\r
-# The PERL_PATH should be the absolute path and name of the perl script \r
-# interpreter (i.e. the result of `which perl').\r
-\r
-PERL_PATH = /usr/bin/perl\r
-\r
-#---------------------------------------------------------------------------\r
-# Configuration options related to the dot tool \r
-#---------------------------------------------------------------------------\r
-\r
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will \r
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base \r
-# or super classes. Setting the tag to NO turns the diagrams off. Note that \r
-# this option is superseded by the HAVE_DOT option below. This is only a \r
-# fallback. It is recommended to install and use dot, since it yields more \r
-# powerful graphs.\r
-\r
-CLASS_DIAGRAMS = NO\r
-\r
-# You can define message sequence charts within doxygen comments using the \msc \r
-# command. Doxygen will then run the mscgen tool (see \r
-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the \r
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where \r
-# the mscgen tool resides. If left empty the tool is assumed to be found in the \r
-# default search path.\r
-\r
-MSCGEN_PATH = \r
-\r
-# If set to YES, the inheritance and collaboration graphs will hide \r
-# inheritance and usage relations if the target is undocumented \r
-# or is not a class.\r
-\r
-HIDE_UNDOC_RELATIONS = YES\r
-\r
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is \r
-# available from the path. This tool is part of Graphviz, a graph visualization \r
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section \r
-# have no effect if this option is set to NO (the default)\r
-\r
-HAVE_DOT = NO\r
-\r
-# By default doxygen will write a font called FreeSans.ttf to the output \r
-# directory and reference it in all dot files that doxygen generates. This \r
-# font does not include all possible unicode characters however, so when you need \r
-# these (or just want a differently looking font) you can specify the font name \r
-# using DOT_FONTNAME. You need need to make sure dot is able to find the font, \r
-# which can be done by putting it in a standard location or by setting the \r
-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory \r
-# containing the font.\r
-\r
-DOT_FONTNAME = FreeSans\r
-\r
-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. \r
-# The default size is 10pt.\r
-\r
-DOT_FONTSIZE = 10\r
-\r
-# By default doxygen will tell dot to use the output directory to look for the \r
-# FreeSans.ttf font (which doxygen will put there itself). If you specify a \r
-# different font using DOT_FONTNAME you can set the path where dot \r
-# can find it using this tag.\r
-\r
-DOT_FONTPATH = \r
-\r
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen \r
-# will generate a graph for each documented class showing the direct and \r
-# indirect inheritance relations. Setting this tag to YES will force the \r
-# the CLASS_DIAGRAMS tag to NO.\r
-\r
-CLASS_GRAPH = NO\r
-\r
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen \r
-# will generate a graph for each documented class showing the direct and \r
-# indirect implementation dependencies (inheritance, containment, and \r
-# class references variables) of the class with other documented classes.\r
-\r
-COLLABORATION_GRAPH = NO\r
-\r
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen \r
-# will generate a graph for groups, showing the direct groups dependencies\r
-\r
-GROUP_GRAPHS = NO\r
-\r
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and \r
-# collaboration diagrams in a style similar to the OMG's Unified Modeling \r
-# Language.\r
-\r
-UML_LOOK = NO\r
-\r
-# If set to YES, the inheritance and collaboration graphs will show the \r
-# relations between templates and their instances.\r
-\r
-TEMPLATE_RELATIONS = NO\r
-\r
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT \r
-# tags are set to YES then doxygen will generate a graph for each documented \r
-# file showing the direct and indirect include dependencies of the file with \r
-# other documented files.\r
-\r
-INCLUDE_GRAPH = NO\r
-\r
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and \r
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each \r
-# documented header file showing the documented files that directly or \r
-# indirectly include this file.\r
-\r
-INCLUDED_BY_GRAPH = NO\r
-\r
-# If the CALL_GRAPH and HAVE_DOT options are set to YES then \r
-# doxygen will generate a call dependency graph for every global function \r
-# or class method. Note that enabling this option will significantly increase \r
-# the time of a run. So in most cases it will be better to enable call graphs \r
-# for selected functions only using the \callgraph command.\r
-\r
-CALL_GRAPH = NO\r
-\r
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then \r
-# doxygen will generate a caller dependency graph for every global function \r
-# or class method. Note that enabling this option will significantly increase \r
-# the time of a run. So in most cases it will be better to enable caller \r
-# graphs for selected functions only using the \callergraph command.\r
-\r
-CALLER_GRAPH = NO\r
-\r
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen \r
-# will graphical hierarchy of all classes instead of a textual one.\r
-\r
-GRAPHICAL_HIERARCHY = NO\r
-\r
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES \r
-# then doxygen will show the dependencies a directory has on other directories \r
-# in a graphical way. The dependency relations are determined by the #include\r
-# relations between the files in the directories.\r
-\r
-DIRECTORY_GRAPH = NO\r
-\r
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images \r
-# generated by dot. Possible values are png, jpg, or gif\r
-# If left blank png will be used.\r
-\r
-DOT_IMAGE_FORMAT = png\r
-\r
-# The tag DOT_PATH can be used to specify the path where the dot tool can be \r
-# found. If left blank, it is assumed the dot tool can be found in the path.\r
-\r
-DOT_PATH = "C:/Program Files/Graphviz2.18/bin"\r
-\r
-# The DOTFILE_DIRS tag can be used to specify one or more directories that \r
-# contain dot files that are included in the documentation (see the \r
-# \dotfile command).\r
-\r
-DOTFILE_DIRS = \r
-\r
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of \r
-# nodes that will be shown in the graph. If the number of nodes in a graph \r
-# becomes larger than this value, doxygen will truncate the graph, which is \r
-# visualized by representing a node as a red box. Note that doxygen if the \r
-# number of direct children of the root node in a graph is already larger than \r
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note \r
-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.\r
-\r
-DOT_GRAPH_MAX_NODES = 15\r
-\r
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the \r
-# graphs generated by dot. A depth value of 3 means that only nodes reachable \r
-# from the root by following a path via at most 3 edges will be shown. Nodes \r
-# that lay further from the root node will be omitted. Note that setting this \r
-# option to 1 or 2 may greatly reduce the computation time needed for large \r
-# code bases. Also note that the size of a graph can be further restricted by \r
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.\r
-\r
-MAX_DOT_GRAPH_DEPTH = 2\r
-\r
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent \r
-# background. This is disabled by default, because dot on Windows does not \r
-# seem to support this out of the box. Warning: Depending on the platform used, \r
-# enabling this option may lead to badly anti-aliased labels on the edges of \r
-# a graph (i.e. they become hard to read).\r
-\r
-DOT_TRANSPARENT = YES\r
-\r
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output \r
-# files in one run (i.e. multiple -o and -T options on the command line). This \r
-# makes dot run faster, but since only newer versions of dot (>1.8.10) \r
-# support this, this feature is disabled by default.\r
-\r
-DOT_MULTI_TARGETS = NO\r
-\r
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will \r
-# generate a legend page explaining the meaning of the various boxes and \r
-# arrows in the dot generated graphs.\r
-\r
-GENERATE_LEGEND = YES\r
-\r
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will \r
-# remove the intermediate dot files that are used to generate \r
-# the various graphs.\r
-\r
-DOT_CLEANUP = YES\r
-\r
-#---------------------------------------------------------------------------\r
-# Configuration::additions related to the search engine \r
-#---------------------------------------------------------------------------\r
-\r
-# The SEARCHENGINE tag specifies whether or not a search engine should be \r
-# used. If set to NO the values of all tags below this one will be ignored.\r
-\r
-SEARCHENGINE = NO\r
+# Doxyfile 1.8.5
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME = "LUFA Library - Joystick Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF =
+
+# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
+# the documentation. The maximum height of the logo should not exceed 55 pixels
+# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
+# to the output directory.
+
+PROJECT_LOGO =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-
+# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi,
+# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en,
+# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish,
+# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish,
+# Turkish, Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF = "The $name class" \
+ "The $name widget" \
+ "The $name file" \
+ is \
+ provides \
+ specifies \
+ contains \
+ represents \
+ a \
+ an \
+ the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB = NO
+
+# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
+# new page for each member. If set to NO, the documentation of a member will be
+# part of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C.
+#
+# Note For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by by putting a % sign in front of the word
+# or globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES = YES
+
+# This flag is only useful for Objective-C code. When set to YES local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO these classes will be included in the various overviews. This option has
+# no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO the members will appear in declaration order.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING = NO
+
+# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
+# todo list. This list is created by putting \todo commands in the
+# documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST = NO
+
+# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
+# test list. This list is created by putting \test commands in the
+# documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST = NO
+
+# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES the list
+# will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. Do not use file names with spaces, bibtex cannot handle them. See
+# also \cite for info how to create references.
+
+CITE_BIB_FILES =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO doxygen will only warn about wrong or incomplete parameter
+# documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS = *.h \
+ *.c \
+ *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS = __* \
+ INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER ) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user-
+# defined cascading style sheet that is included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefor more robust against future updates.
+# Doxygen will copy the style sheet file to the output directory. For an example
+# see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the stylesheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler ( hhc.exe). If non-empty
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated (
+# YES) or that it should be included in the master .chm file ( NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated (
+# YES) or a normal table of contents ( NO) in the .chm file.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavours of web server based searching depending on the
+# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
+# searching and an index file used by the script. When EXTERNAL_SEARCH is
+# enabled the indexing and searching needs to be provided by external tools. See
+# the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer ( doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer ( doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will
+# replace them by respectively the title of the page, the current date and time,
+# only the current date, the version number of doxygen, the project name (see
+# PROJECT_NAME), or the project number (see PROJECT_NUMBER).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS = YES
+
+# If the LATEX_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION = .3
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a
+# validating XML parser to check the syntax of the XML files.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify a XML DTD, which can be used by a
+# validating XML parser to check the syntax of the XML files.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT = docbook
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
+# Definitions (see http://autogen.sf.net) file that captures the structure of
+# the code including all documentation. Note that this feature is still
+# experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
+# in the source code. If set to NO only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF = YES
+
+# If the SEARCH_INCLUDES tag is set to YES the includes files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED = __DOXYGEN__ \
+ PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all refrences to function-like macros that are alone on a line, have an
+# all uppercase name, and do not end with a semicolon. Such function macros are
+# typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have an unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE =
+
+# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
+# class index. If set to NO only the inherited external classes will be listed.
+# The default value is: NO.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
+# the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS = YES
+
+# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH =
+
+# If set to YES, the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS = 0
+
+# When you want a differently looking font n the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS = NO
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP = YES
projects / pub / USBasp.git / blobdiff