# make doxygen = Generate DoxyGen documentation for the project (must have\r
# DoxyGen installed)\r
#\r
-# make debug = Start either simulavr or avarice as specified for debugging, \r
+# make debug = Start either simulavr or avarice as specified for debugging,\r
# with avr-gdb or avr-insight as the front end for debugging.\r
#\r
# make filename.s = Just compile filename.c into the assembler code only.\r
\r
\r
# Target board (see library "Board Types" documentation, NONE for projects not requiring\r
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called \r
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called\r
# "Board" inside the application directory.\r
-BOARD = USBKEY\r
+BOARD = USBKEY\r
\r
\r
# Processor frequency.\r
-# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency in Hz. You can then use this symbol in your source code to \r
+# This will define a symbol, F_CPU, in all source code files equal to the\r
+# processor frequency in Hz. You can then use this symbol in your source code to\r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
#\r
\r
\r
# Input clock frequency.\r
-# This will define a symbol, F_CLOCK, in all source code files equal to the \r
+# This will define a symbol, F_CLOCK, in all source code files equal to the\r
# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
\r
\r
# Path to the LUFA library\r
-LUFA_PATH = ../../..\r
+LUFA_PATH = ../../../\r
\r
\r
-# LUFA library compile-time options\r
+# LUFA library compile-time options and predefined tokens\r
LUFA_OPTS = -D USB_DEVICE_ONLY\r
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8\r
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1\r
LUFA_OPTS += -D USE_FLASH_DESCRIPTORS\r
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
\r
+LUFA_OPTS += -D AUDIO_OUT_STEREO\r
+#LUFA_OPTS += -D AUDIO_OUT_MONO\r
+#LUFA_OPTS += -D AUDIO_OUT_PORTC\r
+\r
+\r
+# Create the LUFA source path variables by including the LUFA root makefile\r
+include $(LUFA_PATH)/LUFA/makefile\r
+\r
\r
# List C source files here. (C dependencies are automatically generated.)\r
SRC = $(TARGET).c \\r
Descriptors.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \\r
- $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/MIDI.c \\r
+ $(LUFA_SRC_USB) \\r
+ $(LUFA_SRC_USBCLASS)\r
\r
\r
# List C++ source files here. (C dependencies are automatically generated.)\r
-CPPSRC = \r
+CPPSRC =\r
\r
\r
# List Assembler source files here.\r
ASRC =\r
\r
\r
-# Optimization level, can be [0, 1, 2, 3, s]. \r
+# Optimization level, can be [0, 1, 2, 3, s].\r
# 0 = turn off optimization. s = optimize for size.\r
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)\r
OPT = s\r
# gnu89 = c89 plus GCC extensions\r
# c99 = ISO C99 standard (not yet fully implemented)\r
# gnu99 = c99 plus GCC extensions\r
-CSTANDARD = -std=gnu99\r
+CSTANDARD = -std=c99\r
\r
\r
# Place -D or -U options here for C sources\r
-CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)\r
+CDEFS = -DF_CPU=$(F_CPU)UL\r
+CDEFS += -DF_CLOCK=$(F_CLOCK)UL\r
+CDEFS += -DBOARD=BOARD_$(BOARD)\r
+CDEFS += $(LUFA_OPTS)\r
\r
\r
# Place -D or -U options here for ASM sources\r
-ADEFS = -DF_CPU=$(F_CPU)\r
-\r
+ADEFS = -DF_CPU=$(F_CPU)\r
+ADEFS += -DF_CLOCK=$(F_CLOCK)UL\r
+ADEFS += -DBOARD=BOARD_$(BOARD)\r
+ADEFS += $(LUFA_OPTS)\r
\r
# Place -D or -U options here for C++ sources\r
-CPPDEFS = -DF_CPU=$(F_CPU)UL\r
+CPPDEFS = -DF_CPU=$(F_CPU)UL\r
+CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL\r
+CPPDEFS += -DBOARD=BOARD_$(BOARD)\r
+CPPDEFS += $(LUFA_OPTS)\r
#CPPDEFS += -D__STDC_LIMIT_MACROS\r
#CPPDEFS += -D__STDC_CONSTANT_MACROS\r
\r
CFLAGS += -fno-inline-small-functions\r
CFLAGS += -fpack-struct\r
CFLAGS += -fshort-enums\r
+CFLAGS += -fno-strict-aliasing\r
CFLAGS += -Wall\r
CFLAGS += -Wstrict-prototypes\r
-CFLAGS += -Wundef\r
+#CFLAGS += -mshort-calls\r
#CFLAGS += -fno-unit-at-a-time\r
+#CFLAGS += -Wundef\r
#CFLAGS += -Wunreachable-code\r
#CFLAGS += -Wsign-compare\r
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)\r
CPPFLAGS += -fshort-enums\r
CPPFLAGS += -fno-exceptions\r
CPPFLAGS += -Wall\r
-CFLAGS += -Wundef\r
+CPPFLAGS += -Wundef\r
#CPPFLAGS += -mshort-calls\r
#CPPFLAGS += -fno-unit-at-a-time\r
#CPPFLAGS += -Wstrict-prototypes\r
# for use in COFF files, additional information about filenames\r
# and function names needs to be present in the assembler source\r
# files -- see avr-libc docs [FIXME: not yet described there]\r
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex \r
+# -listing-cont-lines: Sets the maximum number of continuation lines of hex\r
# dump that will be displayed for a given single line of source input.\r
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100\r
\r
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt\r
\r
# If this is left blank, then it will use the Standard printf version.\r
-PRINTF_LIB = \r
+PRINTF_LIB =\r
#PRINTF_LIB = $(PRINTF_LIB_MIN)\r
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)\r
\r
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt\r
\r
# If this is left blank, then it will use the Standard scanf version.\r
-SCANF_LIB = \r
+SCANF_LIB =\r
#SCANF_LIB = $(SCANF_LIB_MIN)\r
#SCANF_LIB = $(SCANF_LIB_FLOAT)\r
\r
# Each directory must be seperated by a space.\r
# Use forward slashes for directory separators.\r
# For a directory that has spaces, enclose it in quotes.\r
-EXTRALIBDIRS = \r
+EXTRALIBDIRS =\r
\r
\r
\r
# -Wl,...: tell GCC to pass this to linker.\r
# -Map: create map file\r
# --cref: add cross reference to map file\r
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
-LDFLAGS += -Wl,--relax \r
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
+LDFLAGS += -Wl,--relax\r
LDFLAGS += -Wl,--gc-sections\r
LDFLAGS += $(EXTMEMOPTS)\r
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))\r
\r
#---------------- Programming Options (avrdude) ----------------\r
\r
-# Programming hardware: alf avr910 avrisp bascom bsd \r
-# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500\r
-#\r
+# Programming hardware\r
# Type: avrdude -c ?\r
# to get a full listing.\r
#\r
#AVRDUDE_NO_VERIFY = -V\r
\r
# Increase verbosity level. Please use this when submitting bug\r
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> \r
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>\r
# to submit bug reports.\r
#AVRDUDE_VERBOSE = -v -v\r
\r
DEBUG_PORT = 4242\r
\r
# Debugging host used to communicate between GDB / avarice / simulavr, normally\r
-# just set to localhost unless doing some sort of crazy debugging when \r
+# just set to localhost unless doing some sort of crazy debugging when\r
# avarice is running on a different computer.\r
DEBUG_HOST = localhost\r
\r
COPY = cp\r
WINSHELL = cmd\r
\r
+\r
# Define Messages\r
# English\r
MSG_ERRORS_NONE = Errors: none\r
MSG_BEGIN = -------- begin --------\r
MSG_END = -------- end --------\r
-MSG_SIZE_BEFORE = Size before: \r
+MSG_SIZE_BEFORE = Size before:\r
MSG_SIZE_AFTER = Size after:\r
MSG_COFF = Converting to AVR COFF:\r
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:\r
\r
\r
# Define all object files.\r
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) \r
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)\r
\r
# Define all listing files.\r
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) \r
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)\r
\r
\r
# Compiler flags to generate dependency files.\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )\r
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )\r
\r
+\r
sizebefore:\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
- @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
-\r
-checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
- @echo\r
- @echo Checking for invalid events...\r
- @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
- grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
- @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
- @if test -s InvalidEvents.tmp; then exit 1; fi\r
-\r
-showliboptions:\r
- @echo\r
- @echo ---- Compile Time Library Options ----\r
- @for i in $(LUFA_OPTS:-D%=%); do \\r
- echo $$i; \\r
- done\r
- @echo --------------------------------------\r
\r
-showtarget:\r
- @echo\r
- @echo --------- Target Information ---------\r
- @echo AVR Model: $(MCU)\r
- @echo Board: $(BOARD)\r
- @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
- @echo --------------------------------------\r
- \r
\r
# Display compiler version information.\r
-gccversion : \r
+gccversion :\r
@$(CC) --version\r
\r
\r
-# Program the device. \r
+# Program the device.\r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
\r
dfu: $(TARGET).hex\r
dfu-programmer $(MCU) erase\r
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) flash $(TARGET).hex\r
dfu-programmer $(MCU) reset\r
\r
flip-ee: $(TARGET).hex $(TARGET).eep\r
$(REMOVE) $(TARGET)eep.hex\r
\r
dfu-ee: $(TARGET).hex $(TARGET).eep\r
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) eeprom-flash $(TARGET).eep\r
dfu-programmer $(MCU) reset\r
\r
\r
# Generate avr-gdb config/init file which does the following:\r
-# define the reset signal, load the target file, connect to target, and set \r
+# define the reset signal, load the target file, connect to target, and set\r
# a breakpoint at main().\r
-gdb-config: \r
+gdb-config:\r
@$(REMOVE) $(GDBINIT_FILE)\r
@echo define reset >> $(GDBINIT_FILE)\r
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)\r
%.hex: %.elf\r
@echo\r
@echo $(MSG_FLASH) $@\r
- $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@\r
+ $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@\r
\r
%.eep: %.elf\r
@echo\r
%.lss: %.elf\r
@echo\r
@echo $(MSG_EXTENDED_LISTING) $@\r
- $(OBJDUMP) -h -z -S $< > $@\r
+ $(OBJDUMP) -h -S -z $< > $@\r
\r
# Create a symbol table from ELF output file.\r
%.sym: %.elf\r
$(OBJDIR)/%.o : %.c\r
@echo\r
@echo $(MSG_COMPILING) $<\r
- $(CC) -c $(ALL_CFLAGS) $< -o $@ \r
+ $(CC) -c $(ALL_CFLAGS) $< -o $@\r
\r
\r
# Compile: create object files from C++ source files.\r
$(OBJDIR)/%.o : %.cpp\r
@echo\r
@echo $(MSG_COMPILING_CPP) $<\r
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@ \r
+ $(CC) -c $(ALL_CPPFLAGS) $< -o $@\r
\r
\r
# Compile: create assembler files from C source files.\r
\r
# Create preprocessed source for use in sending a bug report.\r
%.i : %.c\r
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ \r
- \r
+ $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@\r
+\r
\r
# Target: clean project.\r
-clean: begin clean_list clean_binary end\r
+clean: begin clean_list end\r
\r
-clean_binary:\r
- $(REMOVE) $(TARGET).hex\r
- \r
-clean_list:\r
+clean_list :\r
+ @echo\r
@echo $(MSG_CLEANING)\r
+ $(REMOVE) $(TARGET).hex\r
$(REMOVE) $(TARGET).eep\r
- $(REMOVE) $(TARGET)eep.hex\r
$(REMOVE) $(TARGET).cof\r
$(REMOVE) $(TARGET).elf\r
$(REMOVE) $(TARGET).map\r
$(REMOVE) $(TARGET).sym\r
$(REMOVE) $(TARGET).lss\r
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)\r
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)\r
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)\r
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)\r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
- $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
doxygen:\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all checkinvalidevents showliboptions \\r
-showtarget begin finish end sizebefore sizeafter \\r
-gccversion build elf hex eep lss sym coff extcoff \\r
-program dfu flip flip-ee dfu-ee clean debug \\r
-clean_list clean_binary gdb-config doxygen
\ No newline at end of file
+.PHONY : all begin finish end sizebefore sizeafter gccversion \\r
+build elf hex eep lss sym coff extcoff doxygen clean \\r
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee \\r
+debug gdb-config\r
+\r
projects / pub / USBasp.git / blobdiff