/*\r
LUFA Library\r
- Copyright (C) Dean Camera, 2009.\r
+ Copyright (C) Dean Camera, 2010.\r
\r
dean [at] fourwalledcubicle [dot] com\r
www.fourwalledcubicle.com\r
*/\r
\r
/*\r
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
- Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)\r
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+ Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)\r
\r
- Permission to use, copy, modify, and distribute this software\r
- and its documentation for any purpose and without fee is hereby\r
- granted, provided that the above copyright notice appear in all\r
- copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
+ Permission to use, copy, modify, distribute, and sell this \r
+ software and its documentation for any purpose is hereby granted\r
+ without fee, provided that the above copyright notice appear in \r
+ all copies and that both that the copyright notice and this\r
+ permission notice and warranty disclaimer appear in supporting \r
+ documentation, and that the name of the author not be used in \r
+ advertising or publicity pertaining to distribution of the \r
software without specific, written prior permission.\r
\r
The author disclaim all warranties with regard to this\r
\r
#include "KeyboardMouse.h"\r
\r
-/* Global Variables */\r
/** Global structure to hold the current keyboard interface HID report, for transmission to the host */\r
USB_KeyboardReport_Data_t KeyboardReportData;\r
\r
/** Global structure to hold the current mouse interface HID report, for transmission to the host */\r
USB_MouseReport_Data_t MouseReportData;\r
\r
+\r
/** Main program entry point. This routine configures the hardware required by the application, then\r
- * starts the scheduler to run the USB management task.\r
+ * enters a loop to run the application tasks in sequence.\r
*/\r
int main(void)\r
{\r
return;\r
}\r
\r
- /* Read in the LED report from the host */\r
- uint8_t LEDStatus = Endpoint_Read_Byte();\r
- uint8_t LEDMask = LEDS_LED2;\r
- \r
- if (LEDStatus & 0x01) // NUM Lock\r
- LEDMask |= LEDS_LED1;\r
- \r
- if (LEDStatus & 0x02) // CAPS Lock\r
- LEDMask |= LEDS_LED3;\r
-\r
- if (LEDStatus & 0x04) // SCROLL Lock\r
- LEDMask |= LEDS_LED4;\r
-\r
- /* Set the status LEDs to the current HID LED status */\r
- LEDs_SetAllLEDs(LEDMask);\r
+ /* Read in and process the LED report from the host */\r
+ Keyboard_ProcessLEDReport(Endpoint_Read_Byte());\r
\r
/* Clear the endpoint data */\r
Endpoint_ClearOUT();\r
}\r
}\r
\r
+/** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard\r
+ * LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT\r
+ * endpoint, the processing code is placed here to avoid duplicating it and potentially having different\r
+ * behaviour depending on the method used to sent it.\r
+ */\r
+void Keyboard_ProcessLEDReport(const uint8_t LEDStatus)\r
+{\r
+ uint8_t LEDMask = LEDS_LED2;\r
+ \r
+ if (LEDStatus & KEYBOARD_LED_NUMLOCK)\r
+ LEDMask |= LEDS_LED1;\r
+ \r
+ if (LEDStatus & KEYBOARD_LED_CAPSLOCK)\r
+ LEDMask |= LEDS_LED3;\r
+\r
+ if (LEDStatus & KEYBOARD_LED_SCROLLLOCK)\r
+ LEDMask |= LEDS_LED4;\r
+\r
+ /* Set the status LEDs to the current Keyboard LED status */\r
+ LEDs_SetAllLEDs(LEDMask);\r
+}\r
+\r
/** Keyboard task. This generates the next keyboard HID report for the host, and transmits it via the\r
* keyboard IN endpoint when the host is ready for more data. Additionally, it processes host LED status\r
* reports sent to the device via the keyboard OUT reporting endpoint.\r
/* Check if board button is not pressed, if so mouse mode enabled */\r
if (!(Buttons_GetStatus() & BUTTONS_BUTTON1))\r
{\r
+ /* Make sent key uppercase by indicating that the left shift key is pressed */\r
+ KeyboardReportData.Modifier = KEYBOARD_MODIFER_LEFTSHIFT;\r
+\r
if (JoyStatus_LCL & JOY_UP)\r
KeyboardReportData.KeyCode[0] = 0x04; // A\r
else if (JoyStatus_LCL & JOY_DOWN)\r
/* Check if Keyboard LED Endpoint Ready for Read/Write */\r
if (Endpoint_IsReadWriteAllowed())\r
{ \r
- /* Read in the LED report from the host */\r
- uint8_t LEDStatus = Endpoint_Read_Byte();\r
- uint8_t LEDMask = LEDS_LED2;\r
- \r
- if (LEDStatus & 0x01) // NUM Lock\r
- LEDMask |= LEDS_LED1;\r
- \r
- if (LEDStatus & 0x02) // CAPS Lock\r
- LEDMask |= LEDS_LED3;\r
-\r
- if (LEDStatus & 0x04) // SCROLL Lock\r
- LEDMask |= LEDS_LED4;\r
-\r
- /* Set the status LEDs to the current Keyboard LED status */\r
- LEDs_SetAllLEDs(LEDMask);\r
+ /* Read in and process the LED report from the host */\r
+ Keyboard_ProcessLEDReport(Endpoint_Read_Byte());\r
\r
/* Handshake the OUT Endpoint - clear endpoint and ready for next report */\r
Endpoint_ClearOUT();\r
projects / pub / USBasp.git / blobdiff