*
* \param[in] freq Required audio sampling frequency in HZ
*/
- #define AUDIO_SAMPLE_FREQ(freq) {.Byte1 = ((uint32_t)freq & 0x0000FF), .Byte2 = (((uint32_t)freq >> 8) & 0xFF), .Byte3 = (((uint32_t)freq >> 16) & 0xFF)}
+ #define AUDIO_SAMPLE_FREQ(freq) {.Byte1 = ((uint32_t)freq & 0xFF), .Byte2 = (((uint32_t)freq >> 8) & 0xFF), .Byte3 = (((uint32_t)freq >> 16) & 0xFF)}
/** Mask for the attributes parameter of an Audio class-specific Endpoint descriptor, indicating that the endpoint
* accepts only filled endpoint packets of audio samples.
* will accept partially filled endpoint packets of audio samples.
*/
#define AUDIO_EP_ACCEPTS_SMALL_PACKETS (0 << 7)
+
+ /** Mask for the attributes parameter of an Audio class-specific Endpoint descriptor, indicating that the endpoint
+ * allows for sampling frequency adjustments to be made via control requests directed at the endpoint.
+ */
+ #define AUDIO_EP_SAMPLE_FREQ_CONTROL (1 << 0)
+
+ /** Mask for the attributes parameter of an Audio class-specific Endpoint descriptor, indicating that the endpoint
+ * allows for pitch adjustments to be made via control requests directed at the endpoint.
+ */
+ #define AUDIO_EP_PITCH_CONTROL (1 << 1)
/* Enums: */
/** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the Audio
AUDIO_REQ_GetMemory = 0x85, /**< Audio class-specific request to get the memory value of a parameter within the device. */
AUDIO_REQ_GetStatus = 0xFF, /**< Audio class-specific request to get the device status. */
};
+
+ /** Enum for Audio class specific Endpoint control modifiers which can be set and retrieved by a USB host, if the corresponding
+ * endpoint control is indicated to be supported in the Endpoint's Audio-class specific endpoint descriptor.
+ */
+ enum Audio_EndpointControls_t
+ {
+ AUDIO_EPCONTROL_SamplingFreq = 0x01, /**< Sampling frequency adjustment of the endpoint. */
+ AUDIO_EPCONTROL_Pitch = 0x02, /**< Pitch adjustment of the endpoint. */
+ };
/* Type Defines: */
/** \brief Audio class-specific Input Terminal Descriptor (LUFA naming conventions).
uint16_t wFormatTag; /**< Format of the audio stream, see Audio Device Formats specification. */
} ATTR_PACKED USB_Audio_StdDescriptor_Interface_AS_t;
- /** \brief 24-Bit Audio Frequency Structure.
- *
- * Type define for a 24bit audio sample frequency structure. GCC does not contain a built in 24bit datatype,
- * this this structure is used to build up the value instead. Fill this structure with the \ref AUDIO_SAMPLE_FREQ() macro.
- */
- typedef struct
- {
- uint8_t Byte1; /**< Lowest 8 bits of the 24-bit value. */
- uint8_t Byte2; /**< Middle 8 bits of the 24-bit value. */
- uint8_t Byte3; /**< Upper 8 bits of the 24-bit value. */
- } ATTR_PACKED USB_Audio_SampleFreq_t;
-
/** \brief Audio class-specific Format Descriptor (LUFA naming conventions).
*
* Type define for an Audio class-specific audio format descriptor. This is used to give the host full details
*/
} ATTR_PACKED USB_Audio_Descriptor_Format_t;
+ /** \brief 24-Bit Audio Frequency Structure.
+ *
+ * Type define for a 24bit audio sample frequency structure. As GCC does not contain a built in 24-bit datatype,
+ * this this structure is used to build up the value instead. Fill this structure with the \ref AUDIO_SAMPLE_FREQ() macro.
+ */
+ typedef struct
+ {
+ uint8_t Byte1; /**< Lowest 8 bits of the 24-bit value. */
+ uint8_t Byte2; /**< Middle 8 bits of the 24-bit value. */
+ uint8_t Byte3; /**< Upper 8 bits of the 24-bit value. */
+ } ATTR_PACKED USB_Audio_SampleFreq_t;
+
/** \brief Audio class-specific Format Descriptor (USB-IF naming conventions).
*
* Type define for an Audio class-specific audio format descriptor. This is used to give the host full details