/*
LUFA Library
- Copyright (C) Dean Camera, 2010.
-
+ Copyright (C) Dean Camera, 2011.
+
dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
+ www.lufa-lib.org
*/
/*
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
*
* Host mode driver for the library USB Printer Class driver.
*
- * \note This file should not be included directly. It is automatically included as needed by the class driver
- * dispatch header located in LUFA/Drivers/USB/Class/Printer.h.
+ * \note This file should not be included directly. It is automatically included as needed by the USB module driver
+ * dispatch header located in LUFA/Drivers/USB.h.
*/
/** \ingroup Group_USBClassPrinter
- * @defgroup Group_USBClassPrinterHost Printer Class Host Mode Driver
+ * \defgroup Group_USBClassPrinterHost Printer Class Host Mode Driver
*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
* - LUFA/Drivers/USB/Class/Host/Printer.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
*
- * \section Module Description
+ * \section Sec_ModDescription Module Description
* Host Mode USB Class driver framework interface, for the Printer USB Class driver.
*
* @{
/* Includes: */
#include "../../USB.h"
#include "../Common/Printer.h"
-
+
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_PRINTER_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/Class/Printer.h instead.
+ #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
#endif
/* Public Interface - May be used in end-application: */
/** \brief Printer Class Host Mode Configuration and State Structure.
*
* Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the Printer class driver functions as the PRNTInterfaceInfo parameter. This
+ * and passed to each of the Printer class driver functions as the \c PRNTInterfaceInfo parameter. This
* stores each Printer interface's configuration and state information.
*/
typedef struct
} USB_ClassInfo_PRNT_Host_t;
/* Enums: */
- enum PRNTHost_EnumerationFailure_ErrorCodes_t
+ enum PRNT_Host_EnumerationFailure_ErrorCodes_t
{
PRNT_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
PRNT_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
- PRNT_ENUMERROR_NoPrinterInterfaceFound = 2, /**< A compatible Printer interface was not found in the device's Configuration Descriptor. */
- PRNT_ENUMERROR_EndpointsNotFound = 3, /**< Compatible Printer endpoints were not found in the device's interfaces. */
+ PRNT_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible Printer interface was not found in the device's Configuration Descriptor. */
+ PRNT_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
};
-
+
/* Function Prototypes: */
+ /** General management task for a given Printer host class interface, required for the correct operation of
+ * the interface. This should be called frequently in the main program loop, before the master USB management task
+ * \ref USB_USBTask().
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ */
+ void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
/** Host interface configuration routine, to configure a given Printer host interface instance using the
* Configuration Descriptor read from an attached USB device. This function automatically updates the given Printer
* instance's state values and configures the pipes required to communicate with the interface if it is found within
* the device. This should be called once after the stack has enumerated the attached device, while the host state
* machine is in the Addressed state.
*
+ * \note The pipe index numbers as given in the interface's configuration structure must not overlap with any other
+ * interface, or pipe bank corruption will occur. Gaps in the allocated pipe numbers or non-sequential indexes
+ * within a single interface is allowed, but no two interfaces of any type have have interleaved pipe indexes.
+ *
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor.
*
- * \return A value from the \ref PRNTHost_EnumerationFailure_ErrorCodes_t enum.
+ * \return A value from the \ref PRNT_Host_EnumerationFailure_ErrorCodes_t enum.
*/
uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
uint16_t ConfigDescriptorSize,
void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
+
/** Configures the printer to enable Bidirectional mode, if it is not already in this mode. This should be called
* once the connected device's configuration has been set, to ensure the printer is ready to accept commands.
*
* \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
*/
uint8_t PRNT_Host_SetBidirectionalMode(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
+
/** Retrieves the status of the virtual Printer port's inbound status lines. The result can then be masked against the
- * PRNT_PORTSTATUS_* macros to determine the printer port's status.
+ * \c PRNT_PORTSTATUS_* macros to determine the printer port's status.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
* \param[out] PortStatus Location where the retrieved port status should be stored.
*/
uint8_t PRNT_Host_SoftReset(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+ /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.
+ *
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ *
+ * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
+ */
+ uint8_t PRNT_Host_Flush(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Sends the given null terminated string to the attached printer's input endpoint.
+ *
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ * \param[in] String Pointer to a null terminated string to send.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
+ void* String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
/** Sends the given raw data stream to the attached printer's input endpoint. This should contain commands that the
* printer is able to understand - for example, PCL data. Not all printers accept all printer languages; see
* \ref PRNT_Host_GetDeviceID() for details on determining acceptable languages for an attached printer.
*
- * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
* call will fail.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- void* Buffer,
- const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+ uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
+ void* Buffer,
+ const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
+ /** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the
+ * byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the
+ * \ref PRNT_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
+ * packed into a single pipe packet, increasing data throughput.
+ *
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ * \param[in] Data Byte of data to send to the device.
+ *
+ * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
+ */
+ uint8_t PRNT_Host_SendByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
+ const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
/** Determines the number of bytes received by the printer interface from the device, waiting to be read. This indicates the number
* of bytes in the IN pipe bank only, and thus the number of calls to \ref PRNT_Host_ReceiveByte() which are guaranteed to succeed
* immediately. If multiple bytes are to be received, they should be buffered by the user application, as the pipe bank will not be
* released back to the USB controller until all bytes are read.
*
- * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
* call will fail.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
*
* \return Total number of buffered bytes received from the device.
*/
- uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo);
-
+ uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo);
+
/** Reads a byte of data from the device. If no data is waiting to be read of if a USB device is not connected, the function
* returns a negative value. The \ref PRNT_Host_BytesReceived() function may be queried in advance to determine how many bytes
* are currently buffered in the Printer interface's data receive pipe.
*
- * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
* call will fail.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
* \return Next received byte from the device, or a negative value if no data received.
*/
int16_t PRNT_Host_ReceiveByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo);
-
+
/** Retrieves the attached printer device's ID string, formatted according to IEEE 1284. This string is sent as a
* Unicode string from the device and is automatically converted to an ASCII encoded C string by this function, thus
* the maximum reportable string length is two less than the size given (to accommodate the Unicode string length
char* const DeviceIDString,
const uint16_t BufferSize) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
- /* Inline Functions: */
- /** General management task for a given Printer host class interface, required for the correct operation of
- * the interface. This should be called frequently in the main program loop, before the master USB management task
- * \ref USB_USBTask().
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- */
- static inline void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
- static inline void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo)
- {
- (void)PRNTInterfaceInfo;
- }
-
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
- /* Macros: */
- #define PRINTER_CLASS 0x07
- #define PRINTER_SUBCLASS 0x01
- #define PRINTER_PROTOCOL 0x02
-
- #define REQ_GetDeviceID 0
- #define REQ_GetPortStatus 1
- #define REQ_SoftReset 2
-
- #define PRNT_FOUND_DATAPIPE_IN (1 << 0)
- #define PRNT_FOUND_DATAPIPE_OUT (1 << 1)
-
/* Function Prototypes: */
- #if defined(__INCLUDE_FROM_PRINTER_CLASS_HOST_C)
- static uint8_t DCOMP_PRNT_NextPRNTInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_PRNT_NextPRNTInterfaceEndpoint(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
+ #if defined(__INCLUDE_FROM_PRINTER_HOST_C)
+ static uint8_t DCOMP_PRNT_Host_NextPRNTInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
+ static uint8_t DCOMP_PRNT_Host_NextPRNTInterfaceEndpoint(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
#endif
#endif
-
+
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
/** @} */
+
projects / pub / USBasp.git / blobdiff