Fix up the incomplete Webserver project so that it integrates with the uIP stack...

[pub/USBasp.git] / Projects / XPLAINBridge / Lib / SoftUART.h

diff --git a/Projects/XPLAINBridge/Lib/SoftUART.h b/Projects/XPLAINBridge/Lib/SoftUART.h
index d992966..7dbf2d5 100644 (file)
--- a/Projects/XPLAINBridge/Lib/SoftUART.h
+++ b/Projects/XPLAINBridge/Lib/SoftUART.h
@@ -1,22 +1,23 @@
 /*\r
 /*\r

-\r
-       soft_uart\r
-\r
-       Copyright John Steggall 2009\r
-\r
+             LUFA Library\r
+     Copyright (C) Dean Camera, 2010.\r
+              \r
+  dean [at] fourwalledcubicle [dot] com\r
+      www.fourwalledcubicle.com\r

 */\r
 \r
 */\r
 \r

-\r

 /*\r
 /*\r

-  Copyright 2009  John Steggall (steggall.j@gmail.com)\r
-\r
-  Permission to use, copy, modify, and distribute this software\r
-  and its documentation for any purpose and without fee is hereby\r
-  granted, provided that the above copyright notice appear in all\r
-  copies and that both that the copyright notice and this\r
-  permission notice and warranty disclaimer appear in supporting\r
-  documentation, and that the name of the author not be used in\r
-  advertising or publicity pertaining to distribution of the\r
+  Copyright 2010  David Prentice (david.prentice [at] farming [dot] uk)\r
+  Copyright 2010  Peter Danneger\r
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+\r
+  Permission to use, copy, modify, distribute, and sell this \r
+  software and its documentation for any purpose is hereby granted\r
+  without fee, provided that the above copyright notice appear in \r
+  all copies and that both that the copyright notice and this\r
+  permission notice and warranty disclaimer appear in supporting \r
+  documentation, and that the name of the author not be used in \r
+  advertising or publicity pertaining to distribution of the \r

   software without specific, written prior permission.\r
 \r
   The author disclaim all warranties with regard to this\r
   software without specific, written prior permission.\r
 \r
   The author disclaim all warranties with regard to this\r


@@ -29,31 +30,31 @@
   this software.\r
 */\r
 \r
   this software.\r
 */\r
 \r

-/* \r
-  Specifically designed for the xplain board, other uses could be made by furkling through the code\r
-  and replacing the port and pin assignments. Also relies on and external interupt to detect the low\r
-  level of the start bit, in this case INT0.\r
-  Always configured to 9600baud. Can be changed by setting the BITLENGTH define to F_CPU/(desired baud)\r
-  code may need optimising when getting any faster to sample the bit in the correct place. No \r
-  compensation has been made for the response time of the int routine.\r
- */\r
-\r
-#ifndef UART_SOFT_H\r
-#define UART_SOFT_H\r
+#ifndef _SOFT_UART_\r
+#define _SOFT_UART_\r

 \r
 \r

-       /*  initialises software uart and enables transmit */\r
-       extern void SoftUART_Init(void);\r
+       /* Includes: */\r
+               #include <avr/io.h>\r
+               #include <avr/interrupt.h>\r
+               #include "SoftUART.h"\r

 \r
 \r

-       /* checks if there is a byte in the receive buffer*/\r
-       extern unsigned char SoftUART_IsReceived(void);\r
+       /* Macros: */\r
+               #define BAUD       9600\r
+               #define BIT_TIME   (uint16_t)((F_CPU + (BAUD / 2)) / BAUD)\r

 \r
 \r

-       /*  returns the received byte */\r
-       extern unsigned char SoftUART_RxByte(void);\r
+               #define SRX        PD0\r
+               #define SRXPIN     PIND\r
+               #define SRXPORT    PORTD\r

 \r
 \r

-       /* starts a byte send and returns the byte to be sent */\r
-       extern unsigned char SoftUART_TxByte(unsigned char data);\r
+               #define STX        PD1\r
+               #define STXPORT    PORTD\r
+               #define STXDDR     DDRD\r

 \r
 \r

-       /* Simulates polling UDRE to see if tx buffer is empty and ready */\r
-       extern unsigned char SoftUART_IsReady(void);\r
+       /* Function Prototypes: */\r
+               unsigned char SoftUART_IsReady(void);\r
+               unsigned char SoftUART_TxByte(unsigned char c);\r
+               unsigned char SoftUART_IsReceived(void);\r
+               unsigned char SoftUART_RxByte(void);\r
+               void SoftUART_Init(void);\r

 \r
 \r

-#endif\r
+#endif
\ No newline at end of file