for (;;)
{
- switch (USB_HostState)
- {
- case HOST_STATE_Addressed:
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
- uint16_t ConfigDescriptorSize;
- uint8_t ConfigDescriptorData[512];
-
- if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
- sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
- {
- puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (MS_Host_ConfigurePipes(&FlashDisk_MS_Interface,
- ConfigDescriptorSize, ConfigDescriptorData) != MS_ENUMERROR_NoError)
- {
- puts_P(PSTR("Attached Device Not a Valid Mass Storage Device.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
- {
- puts_P(PSTR("Error Setting Device Configuration.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- puts_P(PSTR("Mass Storage Device Enumerated.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
- USB_HostState = HOST_STATE_Configured;
- break;
- case HOST_STATE_Configured:
- LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
- uint8_t MaxLUNIndex;
- if (MS_Host_GetMaxLUN(&FlashDisk_MS_Interface, &MaxLUNIndex))
- {
- puts_P(PSTR("Error retrieving max LUN index.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Total LUNs: %d - Using first LUN in device.\r\n"), (MaxLUNIndex + 1));
-
- if (MS_Host_ResetMSInterface(&FlashDisk_MS_Interface))
- {
- puts_P(PSTR("Error resetting Mass Storage interface.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- SCSI_Request_Sense_Response_t SenseData;
- if (MS_Host_RequestSense(&FlashDisk_MS_Interface, 0, &SenseData) != 0)
- {
- puts_P(PSTR("Error retrieving device sense.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (MS_Host_PreventAllowMediumRemoval(&FlashDisk_MS_Interface, 0, true))
- {
- puts_P(PSTR("Error setting Prevent Device Removal bit.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- SCSI_Inquiry_Response_t InquiryData;
- if (MS_Host_GetInquiryData(&FlashDisk_MS_Interface, 0, &InquiryData))
- {
- puts_P(PSTR("Error retrieving device Inquiry data.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID);
-
- puts_P(PSTR("Waiting until ready...\r\n"));
-
- for (;;)
- {
- uint8_t ErrorCode = MS_Host_TestUnitReady(&FlashDisk_MS_Interface, 0);
-
- if (!(ErrorCode))
- break;
-
- /* Check if an error other than a logical command error (device busy) received */
- if (ErrorCode != MS_ERROR_LOGICAL_CMD_FAILED)
- {
- puts_P(PSTR("Error waiting for device to be ready.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
- }
-
- puts_P(PSTR("Retrieving Capacity...\r\n"));
-
- SCSI_Capacity_t DiskCapacity;
- if (MS_Host_ReadDeviceCapacity(&FlashDisk_MS_Interface, 0, &DiskCapacity))
- {
- puts_P(PSTR("Error retrieving device capacity.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("%lu blocks of %lu bytes.\r\n"), DiskCapacity.Blocks, DiskCapacity.BlockSize);
-
- uint8_t BlockBuffer[DiskCapacity.BlockSize];
-
- if (MS_Host_ReadDeviceBlocks(&FlashDisk_MS_Interface, 0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer))
- {
- puts_P(PSTR("Error reading device block.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- puts_P(PSTR("\r\nContents of first block:\r\n"));
-
- for (uint16_t Chunk = 0; Chunk < (DiskCapacity.BlockSize >> 4); Chunk++)
- {
- uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4];
-
- /* Print out the 16 bytes of the chunk in HEX format */
- for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
- {
- char CurrByte = *(ChunkPtr + ByteOffset);
- printf_P(PSTR("%.2X "), CurrByte);
- }
-
- printf_P(PSTR(" "));
-
- /* Print out the 16 bytes of the chunk in ASCII format */
- for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
- {
- char CurrByte = *(ChunkPtr + ByteOffset);
- putchar(isprint(CurrByte) ? CurrByte : '.');
- }
-
- printf_P(PSTR("\r\n"));
- }
-
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
+ MassStorageHost_Task();
+
MS_Host_USBTask(&FlashDisk_MS_Interface);
USB_USBTask();
}
Serial_CreateStream(NULL);
}
+/** Task to manage an enumerated USB Mass Storage device once connected, to print out
+ * data from the device.
+ */
+void MassStorageHost_Task(void)
+{
+ if (USB_HostState != HOST_STATE_Configured)
+ return;
+
+ LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+
+ puts_P(PSTR("Waiting until ready...\r\n"));
+
+ for (;;)
+ {
+ uint8_t ErrorCode = MS_Host_TestUnitReady(&FlashDisk_MS_Interface, 0);
+
+ if (!(ErrorCode))
+ break;
+
+ /* Check if an error other than a logical command error (device busy) received */
+ if (ErrorCode != MS_ERROR_LOGICAL_CMD_FAILED)
+ {
+ puts_P(PSTR("Error waiting for device to be ready.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+ }
+
+ puts_P(PSTR("Retrieving Capacity...\r\n"));
+
+ SCSI_Capacity_t DiskCapacity;
+ if (MS_Host_ReadDeviceCapacity(&FlashDisk_MS_Interface, 0, &DiskCapacity))
+ {
+ puts_P(PSTR("Error retrieving device capacity.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ printf_P(PSTR("%lu blocks of %lu bytes.\r\n"), DiskCapacity.Blocks, DiskCapacity.BlockSize);
+
+ uint8_t BlockBuffer[DiskCapacity.BlockSize];
+
+ if (MS_Host_ReadDeviceBlocks(&FlashDisk_MS_Interface, 0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer))
+ {
+ puts_P(PSTR("Error reading device block.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ puts_P(PSTR("\r\nContents of first block:\r\n"));
+
+ for (uint16_t Chunk = 0; Chunk < (DiskCapacity.BlockSize >> 4); Chunk++)
+ {
+ uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4];
+
+ /* Print out the 16 bytes of the chunk in HEX format */
+ for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
+ {
+ char CurrByte = *(ChunkPtr + ByteOffset);
+ printf_P(PSTR("%.2X "), CurrByte);
+ }
+
+ printf_P(PSTR(" "));
+
+ /* Print out the 16 bytes of the chunk in ASCII format */
+ for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
+ {
+ char CurrByte = *(ChunkPtr + ByteOffset);
+ putchar(isprint(CurrByte) ? CurrByte : '.');
+ }
+
+ printf_P(PSTR("\r\n"));
+ }
+
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
+ USB_Host_SetDeviceConfiguration(0);
+}
+
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+ uint16_t ConfigDescriptorSize;
+ uint8_t ConfigDescriptorData[512];
+
+ if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
+ sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
+ {
+ puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ if (MS_Host_ConfigurePipes(&FlashDisk_MS_Interface,
+ ConfigDescriptorSize, ConfigDescriptorData) != MS_ENUMERROR_NoError)
+ {
+ puts_P(PSTR("Attached Device Not a Valid Mass Storage Device.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
+ {
+ puts_P(PSTR("Error Setting Device Configuration.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ uint8_t MaxLUNIndex;
+ if (MS_Host_GetMaxLUN(&FlashDisk_MS_Interface, &MaxLUNIndex))
+ {
+ puts_P(PSTR("Error retrieving max LUN index.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ printf_P(PSTR("Total LUNs: %d - Using first LUN in device.\r\n"), (MaxLUNIndex + 1));
+
+ if (MS_Host_ResetMSInterface(&FlashDisk_MS_Interface))
+ {
+ puts_P(PSTR("Error resetting Mass Storage interface.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ SCSI_Request_Sense_Response_t SenseData;
+ if (MS_Host_RequestSense(&FlashDisk_MS_Interface, 0, &SenseData) != 0)
+ {
+ puts_P(PSTR("Error retrieving device sense.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ if (MS_Host_PreventAllowMediumRemoval(&FlashDisk_MS_Interface, 0, true))
+ {
+ puts_P(PSTR("Error setting Prevent Device Removal bit.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ SCSI_Inquiry_Response_t InquiryData;
+ if (MS_Host_GetInquiryData(&FlashDisk_MS_Interface, 0, &InquiryData))
+ {
+ puts_P(PSTR("Error retrieving device Inquiry data.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID);
+
+ puts_P(PSTR("Mass Storage Device Enumerated.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
projects / pub / USBasp.git / blobdiff