Ooops - TeensyHID bootloader makefile should use a 16MHz FCPU, not 8MHz.

[pub/USBasp.git] / Projects / AVRISP / AVRISP.txt

diff --git a/Projects/AVRISP/AVRISP.txt b/Projects/AVRISP/AVRISP.txt
index 2de8dd2..35cf937 100644 (file)
--- a/Projects/AVRISP/AVRISP.txt
+++ b/Projects/AVRISP/AVRISP.txt
@@ -6,9 +6,9 @@
  \r
 /** \mainpage AVRISP MKII Programmer Project\r
  *\r
  \r
 /** \mainpage AVRISP MKII Programmer Project\r
  *\r

- *  \section SSec_Compat Demo Compatibility:\r
+ *  \section SSec_Compat Project Compatibility:\r

  *\r
  *\r

- *  The following list indicates what microcontrollers are compatible with this demo.\r
+ *  The following list indicates what microcontrollers are compatible with this project.\r

  *\r
  *  - Series 7 USB AVRs\r
  *  - Series 6 USB AVRs\r
  *\r
  *  - Series 7 USB AVRs\r
  *  - Series 6 USB AVRs\r


@@ -17,7 +17,7 @@
  *\r
  *  \section SSec_Info USB Information:\r
  *\r
  *\r
  *  \section SSec_Info USB Information:\r
  *\r

- *  The following table gives a rundown of the USB utilization of this demo.\r
+ *  The following table gives a rundown of the USB utilization of this project.\r

  *\r
  * <table>\r
  *  <tr>\r
  *\r
  * <table>\r
  *  <tr>\r


@@ -67,7 +67,7 @@
  *  While this application can be compiled for USB AVRs with as little as 8KB of FLASH, for full functionality 16KB or more\r
  *  of FLASH is required. On 8KB devices, either ISP or PDI programming support can be disabled to reduce program size.\r
  *\r
  *  While this application can be compiled for USB AVRs with as little as 8KB of FLASH, for full functionality 16KB or more\r
  *  of FLASH is required. On 8KB devices, either ISP or PDI programming support can be disabled to reduce program size.\r
  *\r

- *\r
+ *  \section Sec_ISP ISP Connections\r

  *  Connections to the device for SPI programming (when enabled):\r
  *\r
  *  <table>\r
  *  Connections to the device for SPI programming (when enabled):\r
  *\r
  *  <table>\r


@@ -111,7 +111,7 @@
  *  <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n\r
  *  <b><sup>2</sup></b> <i>See \ref SSec_Options section</i>\r
  *\r
  *  <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n\r
  *  <b><sup>2</sup></b> <i>See \ref SSec_Options section</i>\r
  *\r

- *\r
+ *  \section Sec_PDI PDI Connections\r

  *  Connections to the device for PDI programming<b><sup>1</sup></b> (when enabled):\r
  *\r
  *  <table>\r
  *  Connections to the device for PDI programming<b><sup>1</sup></b> (when enabled):\r
  *\r
  *  <table>\r


@@ -152,12 +152,12 @@
  *   </tr>\r
  *  </table>\r
  *\r
  *   </tr>\r
  *  </table>\r
  *\r

- *  <b><sup>1</sup></b> When PDI_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together\r
- *                      via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.\r
+ *  <b><sup>1</sup></b> <i>When PDI_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together\r
+ *                         via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>\r

  *\r
  *  \section SSec_Options Project Options\r
  *\r
  *\r
  *  \section SSec_Options Project Options\r
  *\r

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.\r
+ *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.\r

  *\r
  *  <table>\r
  *   <tr>\r
  *\r
  *  <table>\r
  *   <tr>\r