Enhance the HotmailNotifier project so that the LEDs' individual brightness can be...

[pub/USBasp.git] / Demos / Device / LowLevel / Keyboard / Keyboard.h

diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.h b/Demos/Device/LowLevel/Keyboard/Keyboard.h
index f319ab7..889b6f9 100644 (file)
--- a/Demos/Device/LowLevel/Keyboard/Keyboard.h
+++ b/Demos/Device/LowLevel/Keyboard/Keyboard.h
@@ -49,29 +49,30 @@
                #include <LUFA/Version.h>\r
                #include <LUFA/Drivers/USB/USB.h>\r
                #include <LUFA/Drivers/Board/Joystick.h>\r
+               #include <LUFA/Drivers/Board/Buttons.h>\r
                #include <LUFA/Drivers/Board/LEDs.h>\r
 \r
        /* Macros: */\r
                /** Idle period indicating that reports should be sent only when the inputs have changed */\r
-               #define HID_IDLE_CHANGESONLY   0\r
+               #define HID_IDLE_CHANGESONLY      0\r
 \r
                /** HID Class specific request to get the next HID report from the device. */\r
-               #define REQ_GetReport          0x01\r
+               #define REQ_GetReport             0x01\r
 \r
                /** HID Class specific request to get the idle timeout period of the device. */\r
-               #define REQ_GetIdle            0x02\r
+               #define REQ_GetIdle               0x02\r
 \r
                /** HID Class specific request to send the next HID report to the device. */\r
-               #define REQ_SetReport          0x09\r
+               #define REQ_SetReport             0x09\r
 \r
                /** HID Class specific request to set the idle timeout period of the device. */\r
-               #define REQ_SetIdle            0x0A\r
+               #define REQ_SetIdle               0x0A\r
 \r
                /** HID Class specific request to get the current HID protocol in use, either report or boot. */\r
-               #define REQ_GetProtocol        0x03\r
+               #define REQ_GetProtocol           0x03\r
 \r
                /** HID Class specific request to set the current HID protocol in use, either report or boot. */\r
-               #define REQ_SetProtocol        0x0B\r
+               #define REQ_SetProtocol           0x0B\r
 \r
                /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */\r
                #define LEDMASK_USB_NOTREADY      LEDS_LED1\r