{\r
SetupHardware();\r
\r
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY\r
- "Mass Storage Host Demo running.\r\n" ESC_INVERSE_OFF));\r
+ puts_P(PSTR(ESC_FG_CYAN "Mass Storage Host Demo running.\r\n" ESC_FG_WHITE));\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
\r
SerialStream_Init(9600, false);\r
LEDs_Init();\r
Buttons_Init();\r
+ USB_Init();\r
}\r
\r
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and\r
* starts the library USB task to begin the enumeration and USB management process.\r
*/\r
-void EVENT_USB_DeviceAttached(void)\r
+void EVENT_USB_Host_DeviceAttached(void)\r
{\r
- puts_P(PSTR("Device Attached.\r\n"));\r
+ puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));\r
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
}\r
\r
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and\r
* stops the library USB task management process.\r
*/\r
-void EVENT_USB_DeviceUnattached(void)\r
+void EVENT_USB_Host_DeviceUnattached(void)\r
{\r
- puts_P(PSTR("\r\nDevice Unattached.\r\n"));\r
+ puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
}\r
\r
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully\r
* enumerated by the host and is now ready to be used by the application.\r
*/\r
-void EVENT_USB_DeviceEnumerationComplete(void)\r
+void EVENT_USB_Host_DeviceEnumerationComplete(void)\r
{\r
LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
}\r
\r
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */\r
-void EVENT_USB_HostError(const uint8_t ErrorCode)\r
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)\r
{\r
USB_ShutDown();\r
\r
- puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"\r
+ " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
for(;;);\r
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while\r
* enumerating an attached USB device.\r
*/\r
-void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
{\r
- puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
- printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);\r
- printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);\r
+ printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"\r
+ " -- Error Code %d\r\n"\r
+ " -- Sub Error Code %d\r\n"\r
+ " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
}\r
switch (USB_HostState)\r
{\r
case HOST_STATE_Addressed:\r
- /* Standard request to set the device configuration to configuration 1 */\r
- USB_ControlRequest = (USB_Request_Header_t)\r
- {\r
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),\r
- .bRequest = REQ_SetConfiguration,\r
- .wValue = 1,\r
- .wIndex = 0,\r
- .wLength = 0,\r
- };\r
- \r
- /* Select the control pipe for the request transfer */\r
- Pipe_SelectPipe(PIPE_CONTROLPIPE);\r
-\r
- /* Send the request, display error and wait for device detach if request fails */\r
- if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)\r
- {\r
- puts_P(PSTR("Control Error (Set Configuration).\r\n"));\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
-\r
- /* Indicate error via status LEDs */\r
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
-\r
- /* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
- break;\r
- }\r
- \r
- USB_HostState = HOST_STATE_Configured;\r
- break;\r
- case HOST_STATE_Configured:\r
puts_P(PSTR("Getting Config Data.\r\n"));\r
\r
/* Get and process the configuration descriptor data */\r
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)\r
{\r
if (ErrorCode == ControlError)\r
- puts_P(PSTR("Control Error (Get Configuration).\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));\r
else\r
- puts_P(PSTR("Invalid Device.\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));\r
\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error via status LEDs */\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
- puts_P(PSTR("Mass Storage Disk Enumerated.\r\n"));\r
+ /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */\r
+ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)\r
+ {\r
+ printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"\r
+ " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
+\r
+ /* Indicate error via status LEDs */\r
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
+\r
+ /* Wait until USB device disconnected */\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
+ break;\r
+ }\r
\r
- USB_HostState = HOST_STATE_Ready;\r
+ puts_P(PSTR("Mass Storage Disk Enumerated.\r\n"));\r
+\r
+ USB_HostState = HOST_STATE_Configured;\r
break;\r
- case HOST_STATE_Ready:\r
+ case HOST_STATE_Configured:\r
/* Indicate device busy via the status LEDs */\r
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);\r
\r
/* Send the request, display error and wait for device detach if request fails */\r
if ((ErrorCode = MassStore_GetMaxLUN(&MassStore_MaxLUNIndex)) != HOST_SENDCONTROL_Successful)\r
{ \r
- ShowDiskReadError(PSTR("Get Max LUN"), false, ErrorCode);\r
+ ShowDiskReadError(PSTR("Get Max LUN"), ErrorCode);\r
+\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
/* Print number of LUNs detected in the attached device */\r
- printf_P(PSTR("Total LUNs: %d.\r\n"), (MassStore_MaxLUNIndex + 1));\r
+ printf_P(PSTR("Total LUNs: %d - Using first LUN in device.\r\n"), (MassStore_MaxLUNIndex + 1));\r
\r
/* Reset the Mass Storage device interface, ready for use */\r
if ((ErrorCode = MassStore_MassStorageReset()) != HOST_SENDCONTROL_Successful)\r
{\r
- ShowDiskReadError(PSTR("Mass Storage Reset"), false, ErrorCode);\r
+ ShowDiskReadError(PSTR("Mass Storage Reset"), ErrorCode);\r
+ \r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
/* Get sense data from the device - many devices will not accept any other commands until the sense data\r
* is read - both on start-up and after a failed command */\r
SCSI_Request_Sense_Response_t SenseData;\r
- if (((ErrorCode = MassStore_RequestSense(0, &SenseData)) != 0) || (SCSICommandStatus.Status != Command_Pass))\r
+ if ((ErrorCode = MassStore_RequestSense(0, &SenseData)) != 0)\r
{\r
- ShowDiskReadError(PSTR("Request Sense"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);\r
+ ShowDiskReadError(PSTR("Request Sense"), ErrorCode);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
/* Set the prevent removal flag for the device, allowing it to be accessed */\r
- if (((ErrorCode = MassStore_PreventAllowMediumRemoval(0, true)) != 0) || (SCSICommandStatus.Status != Command_Pass))\r
+ if ((ErrorCode = MassStore_PreventAllowMediumRemoval(0, true)) != 0)\r
{\r
- ShowDiskReadError(PSTR("Prevent/Allow Medium Removal"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);\r
+ ShowDiskReadError(PSTR("Prevent/Allow Medium Removal"), ErrorCode);\r
+ \r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
- puts_P(PSTR("Waiting until ready.."));\r
- \r
+ /* Get inquiry data from the device */\r
+ SCSI_Inquiry_Response_t InquiryData;\r
+ if ((ErrorCode = MassStore_Inquiry(0, &InquiryData)) != 0)\r
+ {\r
+ ShowDiskReadError(PSTR("Inquiry"), ErrorCode);\r
+ \r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
+ break;\r
+ }\r
+\r
+ /* Print vendor and product names of attached device */\r
+ printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID);\r
+ \r
/* Wait until disk ready */\r
- do\r
+ puts_P(PSTR("Waiting until ready.."));\r
+\r
+ for (;;)\r
{\r
Serial_TxByte('.');\r
- \r
- if ((ErrorCode = MassStore_TestUnitReady(0)) != 0)\r
+\r
+ /* Abort if device removed */\r
+ if (USB_HostState == HOST_STATE_Unattached)\r
+ break;\r
+\r
+ /* Check to see if the attached device is ready for new commands */\r
+ ErrorCode = MassStore_TestUnitReady(0);\r
+ \r
+ /* If attached device is ready, abort the loop */\r
+ if (!(ErrorCode))\r
+ break;\r
+\r
+ /* If an error othe than a logical command failure (indicating device busy) returned, abort */\r
+ if (ErrorCode != MASS_STORE_SCSI_COMMAND_FAILED)\r
{\r
- ShowDiskReadError(PSTR("Test Unit Ready"), false, ErrorCode);\r
- break; \r
+ ShowDiskReadError(PSTR("Test Unit Ready"), ErrorCode);\r
+\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
+ break;\r
}\r
}\r
- while ((SCSICommandStatus.Status != Command_Pass) && USB_IsConnected);\r
- \r
- /* Abort if device removed */\r
- if (!(USB_IsConnected))\r
- break;\r
\r
puts_P(PSTR("\r\nRetrieving Capacity... "));\r
\r
SCSI_Capacity_t DiskCapacity;\r
\r
/* Retrieve disk capacity */\r
- if (((ErrorCode = MassStore_ReadCapacity(0, &DiskCapacity)) != 0) || (SCSICommandStatus.Status != Command_Pass))\r
+ if ((ErrorCode = MassStore_ReadCapacity(0, &DiskCapacity)) != 0)\r
{\r
- ShowDiskReadError(PSTR("Read Capacity"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);\r
+ ShowDiskReadError(PSTR("Read Capacity"), ErrorCode);\r
+ \r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
uint8_t BlockBuffer[DiskCapacity.BlockSize];\r
\r
/* Read in the first 512 byte block from the device */\r
- if (((ErrorCode = MassStore_ReadDeviceBlock(0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0) ||\r
- (SCSICommandStatus.Status != Command_Pass))\r
+ if ((ErrorCode = MassStore_ReadDeviceBlock(0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0)\r
{\r
- ShowDiskReadError(PSTR("Read Device Block"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);\r
+ ShowDiskReadError(PSTR("Read Device Block"), ErrorCode);\r
+ \r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
while (!(Buttons_GetStatus() & BUTTONS_BUTTON1))\r
{\r
/* Abort if device removed */\r
- if (!(USB_IsConnected))\r
+ if (USB_HostState == HOST_STATE_Unattached)\r
break;\r
}\r
+\r
+ /* Abort if device removed */\r
+ if (USB_HostState == HOST_STATE_Unattached)\r
+ break;\r
\r
/* Print out the entire disk contents in ASCII format */\r
- for (uint32_t CurrBlock = 0; CurrBlock < DiskCapacity.Blocks; CurrBlock++)\r
+ for (uint32_t CurrBlockAddress = 0; CurrBlockAddress < DiskCapacity.Blocks; CurrBlockAddress++)\r
{\r
/* Read in the next block of data from the device */\r
- if (((ErrorCode = MassStore_ReadDeviceBlock(0, CurrBlock, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0) ||\r
- (SCSICommandStatus.Status != Command_Pass))\r
+ if ((ErrorCode = MassStore_ReadDeviceBlock(0, CurrBlockAddress, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0)\r
{\r
- ShowDiskReadError(PSTR("Read Device Block"), (SCSICommandStatus.Status != Command_Pass), ErrorCode);\r
+ ShowDiskReadError(PSTR("Read Device Block"), ErrorCode);\r
+ \r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
}\r
\r
/* Abort if device removed */\r
- if (!(USB_IsConnected))\r
+ if (USB_HostState == HOST_STATE_Unattached)\r
break;\r
}\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
- \r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
}\r
* printing error codes to the serial port and waiting until the device is removed before\r
* continuing.\r
*\r
- * \param CommandString ASCII string located in PROGMEM space indicating what operation failed\r
- * \param FailedAtSCSILayer Indicates if the command failed at the (logical) SCSI layer or at the physical USB layer\r
- * \param ErrorCode Error code of the function which failed to complete successfully\r
+ * \param[in] CommandString ASCII string located in PROGMEM space indicating what operation failed\r
+ * \param[in] ErrorCode Error code of the function which failed to complete successfully\r
*/\r
-void ShowDiskReadError(char* CommandString, bool FailedAtSCSILayer, uint8_t ErrorCode)\r
+void ShowDiskReadError(char* CommandString, uint8_t ErrorCode)\r
{\r
- if (FailedAtSCSILayer)\r
+ if (ErrorCode == MASS_STORE_SCSI_COMMAND_FAILED)\r
{\r
/* Display the error code */\r
- printf_P(PSTR(ESC_BG_RED "SCSI command error (%S).\r\n"), CommandString);\r
- printf_P(PSTR(" -- Status Code: %d"), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "SCSI command error (%S).\r\n"), CommandString);\r
}\r
else\r
{\r
/* Display the error code */\r
- printf_P(PSTR(ESC_BG_RED "Command error (%S).\r\n"), CommandString);\r
- printf_P(PSTR(" -- Error Code: %d"), ErrorCode); \r
+ printf_P(PSTR(ESC_FG_RED "Command error (%S).\r\n"), CommandString);\r
+ printf_P(PSTR(" -- Error Code: %d" ESC_FG_WHITE), ErrorCode); \r
}\r
\r
Pipe_Freeze();\r
\r
/* Indicate device error via the status LEDs */\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
-\r
- /* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
}\r
projects / pub / USBasp.git / blobdiff