{\r
SetupHardware();\r
\r
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY\r
- "Mouse HID Parser Host Demo running.\r\n" ESC_INVERSE_OFF));\r
+ puts_P(PSTR(ESC_FG_CYAN "Mouse HID Parser Host Demo running.\r\n" ESC_FG_WHITE));\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
\r
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and\r
* starts the library USB task to begin the enumeration and USB management process.\r
*/\r
-void EVENT_USB_DeviceAttached(void)\r
+void EVENT_USB_Host_DeviceAttached(void)\r
{\r
- puts_P(PSTR("Device Attached.\r\n"));\r
+ puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));\r
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
}\r
\r
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and\r
* stops the library USB task management process.\r
*/\r
-void EVENT_USB_DeviceUnattached(void)\r
+void EVENT_USB_Host_DeviceUnattached(void)\r
{\r
- puts_P(PSTR("Device Unattached.\r\n"));\r
+ puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
}\r
\r
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully\r
* enumerated by the host and is now ready to be used by the application.\r
*/\r
-void EVENT_USB_DeviceEnumerationComplete(void)\r
+void EVENT_USB_Host_DeviceEnumerationComplete(void)\r
{\r
LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
}\r
\r
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */\r
-void EVENT_USB_HostError(const uint8_t ErrorCode)\r
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)\r
{\r
USB_ShutDown();\r
\r
- puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"\r
+ " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
for(;;);\r
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while\r
* enumerating an attached USB device.\r
*/\r
-void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
{\r
- puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
- printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);\r
- printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);\r
+ printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"\r
+ " -- Error Code %d\r\n"\r
+ " -- Sub Error Code %d\r\n"\r
+ " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
}\r
/* Switch to determine what user-application handled host state the host state machine is in */\r
switch (USB_HostState)\r
{\r
- case HOST_STATE_Addressed: \r
- /* Standard request to set the device configuration to configuration 1 */\r
- USB_ControlRequest = (USB_Request_Header_t)\r
- {\r
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),\r
- .bRequest = REQ_SetConfiguration,\r
- .wValue = 1,\r
- .wIndex = 0,\r
- .wLength = 0,\r
- };\r
-\r
- /* Select the control pipe for the request transfer */\r
- Pipe_SelectPipe(PIPE_CONTROLPIPE);\r
-\r
- /* Send the request, display error and wait for device detach if request fails */\r
- if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)\r
- {\r
- puts_P(PSTR("Control Error (Set Configuration).\r\n"));\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
-\r
- /* Indicate error via status LEDs */\r
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
- \r
- /* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
- break;\r
- }\r
- \r
- USB_HostState = HOST_STATE_Configured;\r
- break;\r
- case HOST_STATE_Configured:\r
+ case HOST_STATE_Addressed:\r
puts_P(PSTR("Getting Config Data.\r\n"));\r
\r
/* Get and process the configuration descriptor data */\r
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)\r
{\r
if (ErrorCode == ControlError)\r
- puts_P(PSTR("Control Error (Get Configuration).\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));\r
else\r
- puts_P(PSTR("Invalid Device.\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));\r
\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error via status LEDs */\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
+ /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */\r
+ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)\r
+ {\r
+ printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"\r
+ " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
+\r
+ /* Indicate error via status LEDs */\r
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
+ \r
+ /* Wait until USB device disconnected */\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
+ break;\r
+ }\r
+ \r
puts_P(PSTR("Processing HID Report.\r\n"));\r
\r
/* Get and process the device's first HID report descriptor */\r
if ((ErrorCode = GetHIDReportData()) != ParseSuccessful)\r
{\r
- puts_P(PSTR("Report Parse Error.\r\n"));\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "Report Parse Error.\r\n"\r
+ " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error via status LEDs */\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break; \r
}\r
\r
puts_P(PSTR("Mouse Enumerated.\r\n"));\r
- \r
- USB_HostState = HOST_STATE_Ready;\r
+\r
+ USB_HostState = HOST_STATE_Configured;\r
break;\r
- case HOST_STATE_Ready:\r
+ case HOST_STATE_Configured:\r
/* Select and unfreeze mouse data pipe */\r
Pipe_SelectPipe(MOUSE_DATAPIPE); \r
Pipe_Unfreeze();\r
/** Processes a read HID report from an attached mouse, extracting out elements via the HID parser results\r
* as required and displays movement and button presses on the board LEDs.\r
*\r
- * \param MouseReport Pointer to a HID report from an attached mouse device\r
+ * \param[in] MouseReport Pointer to a HID report from an attached mouse device\r
*/\r
void ProcessMouseReport(uint8_t* MouseReport)\r
{\r
if (!(FoundData))\r
continue;\r
\r
- int16_t DeltaMovement;\r
- \r
- if (ReportItem->Attributes.BitSize > 8)\r
- DeltaMovement = (int16_t)ReportItem->Value;\r
- else\r
- DeltaMovement = (int8_t)ReportItem->Value;\r
+ int16_t DeltaMovement = (int16_t)(ReportItem->Value << (16 - ReportItem->Attributes.BitSize));\r
\r
/* Determine if the report is for the X or Y delta movement */\r
if (ReportItem->Attributes.Usage.Usage == USAGE_X)\r
projects / pub / USBasp.git / blobdiff