\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
\r
- /* Startup message */\r
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY\r
- "Bluetooth Host Demo running.\r\n" ESC_INVERSE_OFF));\r
+ puts_P(PSTR(ESC_FG_CYAN "Bluetooth Host Demo running.\r\n" ESC_FG_WHITE));\r
\r
for (;;)\r
{\r
USB_Init();\r
}\r
\r
-void EVENT_USB_DeviceAttached(void)\r
+void EVENT_USB_Host_DeviceAttached(void)\r
{\r
- puts_P(PSTR("Device Attached.\r\n"));\r
+ puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
}\r
\r
-void EVENT_USB_DeviceUnattached(void)\r
+void EVENT_USB_Host_DeviceUnattached(void)\r
{\r
- puts_P(PSTR("\r\nDevice Unattached.\r\n"));\r
+ puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
}\r
\r
-void EVENT_USB_DeviceEnumerationComplete(void)\r
+void EVENT_USB_Host_DeviceEnumerationComplete(void)\r
{\r
LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
}\r
\r
-void EVENT_USB_HostError(uint8_t ErrorCode)\r
+void EVENT_USB_Host_HostError(uint8_t ErrorCode)\r
{\r
USB_ShutDown();\r
\r
- puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"\r
+ " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
for(;;);\r
}\r
\r
-void EVENT_USB_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode)\r
+void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode)\r
{\r
- puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
- printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);\r
+ printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"\r
+ " -- Error Code %d\r\n"\r
+ " -- Sub Error Code %d\r\n"\r
+ " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
}\r
if ((ErrorCode = ProcessDeviceDescriptor()) != SuccessfulDeviceRead)\r
{\r
if (ErrorCode == ControlErrorDuringDeviceRead)\r
- puts_P(PSTR("Control Error (Get Device).\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));\r
else\r
- puts_P(PSTR("Invalid Device.\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));\r
\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error via status LEDs */\r
LEDs_SetAllLEDs(LEDS_LED1);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
puts_P(PSTR("Bluetooth Dongle Detected.\r\n"));\r
\r
- /* Standard request to set the device configuration to configuration 1 */\r
- USB_ControlRequest = (USB_Request_Header_t)\r
- {\r
- bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),\r
- bRequest: REQ_SetConfiguration,\r
- wValue: 1,\r
- wIndex: 0,\r
- wLength: 0,\r
- };\r
- \r
- /* Select the control pipe for the request transfer */\r
- Pipe_SelectPipe(PIPE_CONTROLPIPE);\r
-\r
- /* Send the request, display error and wait for device detatch if request fails */\r
- if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)\r
+ /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */\r
+ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)\r
{\r
- puts_P(PSTR("Control Error (Set Configuration).\r\n"));\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"\r
+ " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error via status LEDs */\r
LEDs_SetAllLEDs(LEDS_LED1);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
- USB_HostState = HOST_STATE_Configured;\r
- break;\r
- case HOST_STATE_Configured:\r
puts_P(PSTR("Getting Config Data.\r\n"));\r
\r
/* Get and process the configuration descriptor data */\r
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)\r
{\r
if (ErrorCode == ControlErrorDuringConfigRead)\r
- puts_P(PSTR("Control Error (Get Configuration).\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));\r
else\r
- puts_P(PSTR("Invalid Device.\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));\r
\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error via status LEDs */\r
LEDs_SetAllLEDs(LEDS_LED1);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
puts_P(PSTR("Bluetooth Dongle Enumerated.\r\n"));\r
\r
- USB_HostState = HOST_STATE_Ready;\r
- break;\r
- case HOST_STATE_Ready:\r
- /* Do nothing, Bluetooth stack will take care of enumeration */\r
- \r
+ USB_HostState = HOST_STATE_Configured;\r
break;\r
}\r
}\r
projects / pub / USBasp.git / blobdiff