\r
#include "Magstripe.h"\r
\r
-/* Project Tags, for reading out using the ButtLoad project */\r
-BUTTLOADTAG(ProjName, "Magstripe Reader");\r
-BUTTLOADTAG(BuildTime, __TIME__);\r
-BUTTLOADTAG(BuildDate, __DATE__);\r
-BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING);\r
-\r
/* Scheduler Task List */\r
TASK_LIST\r
{\r
- { Task: USB_USBTask , TaskStatus: TASK_STOP },\r
- { Task: USB_Keyboard_Report , TaskStatus: TASK_STOP },\r
- { Task: Magstripe_Read , TaskStatus: TASK_STOP },\r
+ { .Task = USB_USBTask , .TaskStatus = TASK_STOP },\r
+ { .Task = USB_Keyboard_Report , .TaskStatus = TASK_STOP },\r
+ { .Task = Magstripe_Read , .TaskStatus = TASK_STOP },\r
};\r
\r
/* Global Variables */\r
/** Circular buffer to hold the read bits from track 3 of the inserted magnetic card. */\r
BitBuffer_t Track3Data;\r
\r
-/** Delay counter between sucessive key strokes. This is to prevent the OS from ignoring multiple keys in a short\r
+/** Delay counter between successive key strokes. This is to prevent the OS from ignoring multiple keys in a short\r
* period of time due to key repeats. Two milliseconds works for most OSes.\r
*/\r
uint8_t KeyDelayRemaining;\r
EVENT_HANDLER(USB_UnhandledControlPacket)\r
{\r
/* Handle HID Class specific requests */\r
- switch (bRequest)\r
+ switch (USB_ControlRequest.bRequest)\r
{\r
case REQ_GetReport:\r
- if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))\r
+ if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))\r
{\r
USB_KeyboardReport_Data_t KeyboardReportData;\r
\r
/* Create the next keyboard report for transmission to the host */\r
GetNextReport(&KeyboardReportData);\r
\r
- /* Ignore report type and ID number value */\r
- Endpoint_Discard_Word();\r
- \r
- /* Ignore unused Interface number value */\r
- Endpoint_Discard_Word();\r
-\r
- /* Read in the number of bytes in the report to send to the host */\r
- uint16_t wLength = Endpoint_Read_Word_LE();\r
- \r
- /* If trying to send more bytes than exist to the host, clamp the value at the report size */\r
- if (wLength > sizeof(KeyboardReportData))\r
- wLength = sizeof(KeyboardReportData);\r
-\r
- Endpoint_ClearSetupReceived();\r
+ Endpoint_ClearSETUP();\r
\r
/* Write the report data to the control endpoint */\r
- Endpoint_Write_Control_Stream_LE(&KeyboardReportData, wLength);\r
+ Endpoint_Write_Control_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));\r
\r
/* Finalize the stream transfer to send the last packet or clear the host abort */\r
- Endpoint_ClearSetupOUT();\r
+ Endpoint_ClearOUT();\r
}\r
\r
break;\r
case REQ_GetProtocol:\r
- if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))\r
+ if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))\r
{\r
- Endpoint_ClearSetupReceived();\r
+ Endpoint_ClearSETUP();\r
\r
/* Write the current protocol flag to the host */\r
Endpoint_Write_Byte(UsingReportProtocol);\r
\r
/* Send the flag to the host */\r
- Endpoint_ClearSetupIN();\r
+ Endpoint_ClearIN();\r
\r
/* Acknowledge status stage */\r
- while (!(Endpoint_IsSetupOUTReceived()));\r
- Endpoint_ClearSetupOUT();\r
+ while (!(Endpoint_IsOUTReceived()));\r
+ Endpoint_ClearOUT();\r
}\r
\r
break;\r
case REQ_SetProtocol:\r
- if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))\r
+ if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))\r
{\r
- /* Read in the wValue parameter containing the new protocol mode */\r
- uint16_t wValue = Endpoint_Read_Word_LE();\r
- \r
- Endpoint_ClearSetupReceived();\r
+ Endpoint_ClearSETUP();\r
\r
/* Set or clear the flag depending on what the host indicates that the current Protocol should be */\r
- UsingReportProtocol = (wValue != 0x0000);\r
+ UsingReportProtocol = (USB_ControlRequest.wValue != 0x0000);\r
\r
/* Acknowledge status stage */\r
- while (!(Endpoint_IsSetupINReady()));\r
- Endpoint_ClearSetupIN();\r
+ while (!(Endpoint_IsINReady()));\r
+ Endpoint_ClearIN();\r
}\r
\r
break;\r
case REQ_SetIdle:\r
- if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))\r
+ if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))\r
{\r
- /* Read in the wValue parameter containing the idle period */\r
- uint16_t wValue = Endpoint_Read_Word_LE();\r
- \r
- Endpoint_ClearSetupReceived();\r
+ Endpoint_ClearSETUP();\r
\r
/* Get idle period in MSB */\r
- IdleCount = (wValue >> 8);\r
+ IdleCount = (USB_ControlRequest.wValue >> 8);\r
\r
/* Acknowledge status stage */\r
- while (!(Endpoint_IsSetupINReady()));\r
- Endpoint_ClearSetupIN();\r
+ while (!(Endpoint_IsINReady()));\r
+ Endpoint_ClearIN();\r
}\r
\r
break;\r
case REQ_GetIdle:\r
- if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))\r
+ if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))\r
{ \r
- Endpoint_ClearSetupReceived();\r
+ Endpoint_ClearSETUP();\r
\r
/* Write the current idle duration to the host */\r
Endpoint_Write_Byte(IdleCount);\r
\r
/* Send the flag to the host */\r
- Endpoint_ClearSetupIN();\r
+ Endpoint_ClearIN();\r
\r
/* Acknowledge status stage */\r
- while (!(Endpoint_IsSetupOUTReceived()));\r
- Endpoint_ClearSetupOUT();\r
+ while (!(Endpoint_IsOUTReceived()));\r
+ Endpoint_ClearOUT();\r
}\r
\r
break;\r
/* Set the flag indicating that a null report must eventually be sent to release all pressed keys */\r
MustRelease = true;\r
\r
- /* Only send the next key on odd reports, so that they are interpersed with null reports to release keys */\r
+ /* Only send the next key on odd reports, so that they are interspersed with null reports to release keys */\r
if (OddReport)\r
{\r
/* Set the report key code to the key code for the next data bit */\r
return false;\r
}\r
\r
-/** Task to read out data from inserted magnetic cards and place the seperate track data into their respective\r
+/** Task to read out data from inserted magnetic cards and place the separate track data into their respective\r
* data buffers for later sending to the host as keyboard key presses.\r
*/\r
TASK(Magstripe_Read)\r
{\r
- /* Arrays to hold the buffer pointers, clock and data bit masks for the seperate card tracks */\r
+ /* Arrays to hold the buffer pointers, clock and data bit masks for the separate card tracks */\r
const struct\r
{\r
BitBuffer_t* Buffer;\r
}\r
\r
/** Task for the magnetic card reading and keyboard report generation. This task waits until a card is inserted,\r
- * then reads off the card data and sends it to the host as a series of keyboard keypresses via keyboard reports.\r
+ * then reads off the card data and sends it to the host as a series of keyboard key presses via keyboard reports.\r
*/\r
TASK(USB_Keyboard_Report)\r
{\r
Endpoint_SelectEndpoint(KEYBOARD_EPNUM);\r
\r
/* Check if Keyboard Endpoint Ready for Read/Write */\r
- if (Endpoint_ReadWriteAllowed())\r
+ if (Endpoint_IsReadWriteAllowed())\r
{\r
/* Only fetch the next key to send once the period between key presses has elapsed */\r
if (!(KeyDelayRemaining))\r
Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(USB_KeyboardReport_Data_t));\r
\r
/* Finalize the stream transfer to send the last packet */\r
- Endpoint_ClearCurrentBank();\r
+ Endpoint_ClearIN();\r
\r
/* Reset the key delay period counter */\r
KeyDelayRemaining = 2;\r
projects / pub / USBasp.git / blobdiff