Fix up core library makefile clean target to properly remove dependency files.

[pub/USBasp.git] / Projects / Magstripe / Magstripe.txt

diff --git a/Projects/Magstripe/Magstripe.txt b/Projects/Magstripe/Magstripe.txt
index 9c73c7b..9c39cbf 100644 (file)
--- a/Projects/Magstripe/Magstripe.txt
+++ b/Projects/Magstripe/Magstripe.txt
@@ -10,8 +10,8 @@
  *
  *  The following list indicates what microcontrollers are compatible with this project.
  *
  *
  *  The following list indicates what microcontrollers are compatible with this project.
  *

- *  - AT90USB1287
- *  - AT90USB1286
+ *  \li AT90USB1287
+ *  \li AT90USB1286

  *
  *  \section Sec_Info USB Information:
  *
  *
  *  \section Sec_Info USB Information:
  *


@@ -35,7 +35,7 @@
  *   <td>USBIF HID Standard, USBIF HID Usage Tables</td>
  *  </tr>
  *  <tr>
  *   <td>USBIF HID Standard, USBIF HID Usage Tables</td>
  *  </tr>
  *  <tr>

- *   <td><b>Usable Speeds:</b></td>
+ *   <td><b>Supported USB Speeds:</b></td>

  *   <td>Full Speed Mode</td>
  *  </tr>
  * </table>
  *   <td>Full Speed Mode</td>
  *  </tr>
  * </table>


@@ -87,13 +87,11 @@
  *   </tr>
  *  </table>
  *
  *   </tr>
  *  </table>
  *

- *  This project is based on the LUFA Keyboard projectnstration application,
- *  written by Denver Gingerich.
+ *  This project is based on the LUFA Keyboard project demonstration application, written by Denver Gingerich.

  *
  *

- *  This application uses a keyboard HID driver to communicate the data collected
- *  a TTL magnetic stripe reader to the connected computer. The raw bitstream
- *  obtained from the magnetic stripe reader is "typed" through the keyboard
- *  driver as 0's and 1's. After every card swipe, the project will send a return key.
+ *  This application uses a keyboard HID driver to communicate the data collected a TTL magnetic stripe reader
+ *  to the connected computer. The raw bitstream obtained from the magnetic stripe reader is "typed" through
+ *  the keyboard driver as 0's and 1's. After every card swipe, the project will send a return key.

  *
  *  \section Sec_Options Project Options
  *
  *
  *  \section Sec_Options Project Options
  *


@@ -112,52 +110,52 @@
  *   </tr>
  *   <tr>
  *    <td>MAG_T1_CLOCK</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T1_CLOCK</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>Mask for the magnetic card reader's CLOCK line for the reader's track 1 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T1_DATA</td>
  *    <td>Mask for the magnetic card reader's CLOCK line for the reader's track 1 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T1_DATA</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>Mask for the magnetic card reader's DATA line for the reader's track 1 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T2_CLOCK</td>
  *    <td>Mask for the magnetic card reader's DATA line for the reader's track 1 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T2_CLOCK</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>Mask for the magnetic card reader's CLOCK line for the reader's track 2 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T2_DATA</td>
  *    <td>Mask for the magnetic card reader's CLOCK line for the reader's track 2 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T2_DATA</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>Mask for the magnetic card reader's DATA line for the reader's track 2 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T3_CLOCK</td>
  *    <td>Mask for the magnetic card reader's DATA line for the reader's track 2 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T3_CLOCK</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>Mask for the magnetic card reader's CLOCK line for the reader's track 3 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T3_DATA</td>
  *    <td>Mask for the magnetic card reader's CLOCK line for the reader's track 3 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_T3_DATA</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>Mask for the magnetic card reader's DATA line for the reader's track 3 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_CARDPRESENT</td>
  *    <td>Mask for the magnetic card reader's DATA line for the reader's track 3 output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_CARDPRESENT</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>Mask for the magnetic card reader's card detection output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_PIN</td>
  *    <td>Mask for the magnetic card reader's card detection output.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_PIN</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>PIN register that the magnetic card reader device is attached to.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_PORT</td>
  *    <td>PIN register that the magnetic card reader device is attached to.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_PORT</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>PORT register that the magnetic card reader device is attached to.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_DDR</td>
  *    <td>PORT register that the magnetic card reader device is attached to.</td>
  *   </tr>
  *   <tr>
  *    <td>MAG_DDR</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>DDR register that the magnetic card reader device is attached to.</td>
  *   </tr>
  *  </table>
  *    <td>DDR register that the magnetic card reader device is attached to.</td>
  *   </tr>
  *  </table>