Reset version information now that the LUFA-130303 release has been tagged.

[pub/USBasp.git] / Demos / Device / ClassDriver / AudioInput / AudioInput.txt

diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
index fd94748..dfa9362 100644 (file)
--- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
+++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
@@ -10,9 +10,9 @@
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *

- *  - Series 7 USB AVRs (AT90USBxxx7)
- *  - Series 6 USB AVRs (AT90USBxxx6)
- *  - Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)

  *
  *  \section Sec_Info USB Information:
  *
  *
  *  \section Sec_Info USB Information:
  *


@@ -38,7 +38,7 @@
  *        USBIF Audio 1.0 Data Formats Specification</td>
  *   </tr>
  *   <tr>
  *        USBIF Audio 1.0 Data Formats Specification</td>
  *   </tr>
  *   <tr>

- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>

  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>


@@ -72,21 +72,21 @@
  *    <td><b>Description:</b></td>
  *   </tr>
  *   <tr>
  *    <td><b>Description:</b></td>
  *   </tr>
  *   <tr>

+ *    <td>MIC_IN_ADC_CHANNEL</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ *   </tr>
+ *   <tr>

  *    <td>USE_TEST_TONE</td>
  *    <td>USE_TEST_TONE</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
  *        instead of sampling the board microphone.</td>
  *   </tr>
  *   <tr>
  *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
  *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
  *        instead of sampling the board microphone.</td>
  *   </tr>
  *   <tr>
  *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>

- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>

  *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
  *   </tr>
  *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
  *   </tr>

- *   <tr>
- *    <td>AUDIO_SAMPLE_FREQUENCY</td>
- *    <td>Descriptors.h</td>
- *    <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>
- *   </tr>

  *  </table>
  */
 
  *  </table>
  */