AppConfigHeaders: Switch class driver Host mode demos to use LUFAConfig.h configurati...

[pub/USBasp.git] / Demos / Device / LowLevel / MassStorage / MassStorage.txt

diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt
index 01865a7..8d04882 100644 (file)
--- a/Demos/Device/LowLevel/MassStorage/MassStorage.txt
+++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt
@@ -47,24 +47,23 @@
  *
  *  \section Sec_Description Project Description:
  *
  *
  *  \section Sec_Description Project Description:
  *

- *  Dual LUN Mass Storage demonstration application. This gives a simple
- *  reference application for implementing a multiple LUN USB Mass Storage
- *  device using the basic USB UFI drivers in all modern OSes (i.e. no
- *  special drivers required).
+ *  Mass Storage device demonstration application. This gives a simple
+ *  reference application for implementing a USB Mass Storage device using
+ *  the basic USB UFI drivers in all modern OSes (i.e. no special drivers
+ *  required).

  *
  *  On start-up the system will automatically enumerate and function as an
  *
  *  On start-up the system will automatically enumerate and function as an

- *  external mass storage device with two LUNs (separate disks) which may
- *  be formatted and used in the same manner as commercial USB Mass Storage
- *  devices.
+ *  external mass storage device which may be formatted and used in the same
+ *  manner as commercial USB Mass Storage devices.

  *
  *

- *  You will need to format the mass storage drives upon first run of this
+ *  You will need to format the mass storage drive upon first run of this

  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.
  *
  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.
  *

- *  This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
- *  value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
- *  255), with each LUN being allocated an equal portion of the available
+ *  This demo is not restricted to only a single LUN (logical disk); by changing
+ *  the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
+ *  (from 1 to 255), with each LUN being allocated an equal portion of the available

  *  Dataflash memory.
  *
  *  The USB control endpoint is managed entirely by the library using endpoint
  *  Dataflash memory.
  *
  *  The USB control endpoint is managed entirely by the library using endpoint