Clean up excessive whitespace at the end of each line using the wspurify tool made...

[pub/USBasp.git] / LUFA / Drivers / USB / LowLevel / Device.h

diff --git a/LUFA/Drivers/USB/LowLevel/Device.h b/LUFA/Drivers/USB/LowLevel/Device.h
index 03440d2..20c9157 100644 (file)
--- a/LUFA/Drivers/USB/LowLevel/Device.h
+++ b/LUFA/Drivers/USB/LowLevel/Device.h
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.

-              
+

   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */


@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 

-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this

   software and its documentation for any purpose is hereby granted
   software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in

   all copies and that both that the copyright notice and this
   all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the

   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this


@@ -54,7 +54,7 @@
                #include <avr/pgmspace.h>
                #include <avr/eeprom.h>
 
                #include <avr/pgmspace.h>
                #include <avr/eeprom.h>
 

-               #include "../../../Common/Common.h"     
+               #include "../../../Common/Common.h"

                #include "../HighLevel/StdDescriptors.h"
                #include "USBInterrupt.h"
                #include "Endpoint.h"
                #include "../HighLevel/StdDescriptors.h"
                #include "USBInterrupt.h"
                #include "Endpoint.h"


@@ -67,7 +67,7 @@
                #if !defined(__INCLUDE_FROM_USB_DRIVER)
                        #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
                #endif
                #if !defined(__INCLUDE_FROM_USB_DRIVER)
                        #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
                #endif

-                       
+

        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)


@@ -82,7 +82,7 @@
                                 */
                                #define USB_DEVICE_OPT_LOWSPEED            (1 << 0)
                        #endif
                                 */
                                #define USB_DEVICE_OPT_LOWSPEED            (1 << 0)
                        #endif

-                       
+

                        /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
                         *  USB interface should be initialized in full speed (12Mb/s) mode.
                         */
                        /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
                         *  USB interface should be initialized in full speed (12Mb/s) mode.
                         */


@@ -109,7 +109,7 @@
                         *  \see \ref Group_Descriptors for more information on the RMWAKEUP feature and device descriptors.
                         */
                        void USB_Device_SendRemoteWakeup(void);
                         *  \see \ref Group_Descriptors for more information on the RMWAKEUP feature and device descriptors.
                         */
                        void USB_Device_SendRemoteWakeup(void);

-                       
+

                /* Type Defines: */
                        enum USB_Device_States_t
                        {
                /* Type Defines: */
                        enum USB_Device_States_t
                        {


@@ -138,7 +138,7 @@
                                                                                *   resumed.
                                                                                */
                        };
                                                                                *   resumed.
                                                                                */
                        };

-                       
+

                /* Inline Functions: */
                        /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host)
                         *  the frame number is incremented by one.
                /* Inline Functions: */
                        /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host)
                         *  the frame number is incremented by one.


@@ -147,7 +147,7 @@
                        {
                                return UDFNUM;
                        }
                        {
                                return UDFNUM;
                        }

-               
+

                        #if !defined(NO_SOF_EVENTS)
                                /** Enables the device mode Start Of Frame events. When enabled, this causes the
                                 *  \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
                        #if !defined(NO_SOF_EVENTS)
                                /** Enables the device mode Start Of Frame events. When enabled, this causes the
                                 *  \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,


@@ -160,7 +160,7 @@
                                {
                                        USB_INT_Enable(USB_INT_SOFI);
                                }
                                {
                                        USB_INT_Enable(USB_INT_SOFI);
                                }

-                                       
+

                                /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
                                 *  \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
                                 *
                                /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
                                 *  \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
                                 *


@@ -172,13 +172,13 @@
                                        USB_INT_Disable(USB_INT_SOFI);
                                }
                        #endif
                                        USB_INT_Disable(USB_INT_SOFI);
                                }
                        #endif

-                       
+

                /* Function Prototypes: */
                        /** Function to retrieve a given descriptor's size and memory location from the given descriptor type value,
                /* Function Prototypes: */
                        /** Function to retrieve a given descriptor's size and memory location from the given descriptor type value,

-                        *  index and language ID. This function MUST be overridden in the user application (added with full, identical  
+                        *  index and language ID. This function MUST be overridden in the user application (added with full, identical

                         *  prototype and name so that the library can call it to retrieve descriptor data.
                         *
                         *  prototype and name so that the library can call it to retrieve descriptor data.
                         *

-                        *  \param[in] wValue               The type of the descriptor to retrieve in the upper byte, and the index in the 
+                        *  \param[in] wValue               The type of the descriptor to retrieve in the upper byte, and the index in the

                         *                                  lower byte (when more than one descriptor of the given type exists, such as the
                         *                                  case of string descriptors). The type may be one of the standard types defined
                         *                                  in the DescriptorTypes_t enum, or may be a class-specific descriptor type value.
                         *                                  lower byte (when more than one descriptor of the given type exists, such as the
                         *                                  case of string descriptors). The type may be one of the standard types defined
                         *                                  in the DescriptorTypes_t enum, or may be a class-specific descriptor type value.


@@ -193,7 +193,7 @@
                         *
                         *  \note By default, the library expects all descriptors to be located in flash memory via the PROGMEM attribute.
                         *        If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to
                         *
                         *  \note By default, the library expects all descriptors to be located in flash memory via the PROGMEM attribute.
                         *        If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to

-                        *        allow the descriptors to be changed dynamically at runtime) either the USE_RAM_DESCRIPTORS or the 
+                        *        allow the descriptors to be changed dynamically at runtime) either the USE_RAM_DESCRIPTORS or the

                         *        USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D
                         *        switch.
                         *
                         *        USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D
                         *        switch.
                         *


@@ -216,14 +216,14 @@
                        {
                                UDCON |=  (1 << LSM);
                        }
                        {
                                UDCON |=  (1 << LSM);
                        }

-                       
+

                        static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE;
                        static inline void USB_Device_SetFullSpeed(void)
                        {
                                UDCON &= ~(1 << LSM);
                        }
                        #endif
                        static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE;
                        static inline void USB_Device_SetFullSpeed(void)
                        {
                                UDCON &= ~(1 << LSM);
                        }
                        #endif

-                       
+

                        static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
                        static inline void USB_Device_SetDeviceAddress(const uint8_t Address)
                        {
                        static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
                        static inline void USB_Device_SetDeviceAddress(const uint8_t Address)
                        {


@@ -241,3 +241,4 @@
 #endif
 
 /** @} */
 #endif
 
 /** @} */

+