/*
LUFA Library
Copyright (C) Dean Camera, 2010.
-
+
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
#include <stdio.h>
#include <string.h>
-
+
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
uint8_t DataOUTPipeNumber; /**< Pipe number of the CDC interface's OUT data pipe. */
bool DataOUTPipeDoubleBank; /**< Indicates if the CDC interface's OUT data pipe should use double banking. */
- uint8_t NotificationPipeNumber; /**< Pipe number of the CDC interface's IN notification endpoint, if used. */
+ uint8_t NotificationPipeNumber; /**< Pipe number of the CDC interface's IN notification endpoint, if used. */
bool NotificationPipeDoubleBank; /**< Indicates if the CDC interface's notification pipe should use double banking. */
} Config; /**< Config data for the USB class interface within the device. All elements in this section
* <b>must</b> be set or the interface will fail to enumerate and operate correctly.
* Configured state.
*/
uint8_t ControlInterfaceNumber; /**< Interface index of the CDC-ACM control interface within the attached device. */
-
+
uint16_t DataINPipeSize; /**< Size in bytes of the CDC interface's IN data pipe. */
uint16_t DataOUTPipeSize; /**< Size in bytes of the CDC interface's OUT data pipe. */
uint16_t NotificationPipeSize; /**< Size in bytes of the CDC interface's IN notification pipe, if used. */
-
+
struct
{
uint8_t HostToDevice; /**< Control line states from the host to device, as a set of CDC_CONTROL_LINE_OUT_*
* masks. This value is updated each time \ref CDC_Host_USBTask() is called.
*/
} ControlLineStates; /**< Current states of the virtual serial port's control lines between the device and host. */
-
+
struct
{
uint32_t BaudRateBPS; /**< Baud rate of the virtual serial port, in bits per second. */
* the interface is enumerated.
*/
} USB_ClassInfo_CDC_Host_t;
-
+
/* Enums: */
/** Enum for the possible error codes returned by the \ref CDC_Host_ConfigurePipes() function. */
enum CDC_Host_EnumerationFailure_ErrorCodes_t
CDC_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
CDC_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible CDC interface was not found in the device's Configuration Descriptor. */
};
-
+
/* Function Prototypes: */
/** General management task for a given CDC host class interface, required for the correct operation of the interface. This should
* be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state.
*/
void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
+
/** Host interface configuration routine, to configure a given CDC host interface instance using the Configuration
* Descriptor read from an attached USB device. This function automatically updates the given CDC Host instance's
* state values and configures the pipes required to communicate with the interface if it is found within the device.
uint8_t CDC_Host_ConfigurePipes(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
uint16_t ConfigDescriptorSize,
void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
+
/** Sets the line encoding for the attached device's virtual serial port. This should be called when the LineEncoding
* values of the interface have been changed to push the new settings to the USB device.
*
* \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
*/
uint8_t CDC_Host_SendControlLineStateChange(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
+
/** Sends a Send Break request to the device. This is generally used to separate data data or to indicate a special condition
* to the receiving device.
*
*/
uint8_t CDC_Host_SendBreak(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
const uint8_t Duration) ATTR_NON_NULL_PTR_ARG(1);
-
+
/** Sends a given string to the attached USB device, if connected. If a device is not connected when the function is called, the
* string is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the
- * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
+ * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
* packed into a single pipe packet, increasing data throughput.
*
* \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
uint8_t CDC_Host_SendString(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
const char* const Data,
const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
+
/** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the
* byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the
- * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
+ * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
* packed into a single pipe packet, increasing data throughput.
*
* \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
* \return Next received byte from the device, or a negative value if no data received.
*/
int16_t CDC_Host_ReceiveByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
+
/** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.
*
* \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
static uint8_t DCOMP_CDC_Host_NextCDCInterfaceEndpoint(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
#endif
#endif
-
+
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
/** @} */
+
projects / pub / USBasp.git / blobdiff