/*
LUFA Library
Copyright (C) Dean Camera, 2010.
-
+
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
const RFCOMM_Header_t* FrameHeader = (const RFCOMM_Header_t*)Data;
const uint8_t* FrameData = (const uint8_t*)Data + sizeof(RFCOMM_Header_t);
uint16_t FrameDataLen = RFCOMM_GetVariableFieldValue(&FrameData);
-
+
/* Decode the RFCOMM frame type from the header */
switch (FrameHeader->Control & ~FRAME_POLL_FINAL)
{
uint8_t Length;
RFCOMM_MSC_Parameters_t Params;
} MSCommand;
-
+
MSCommand.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_ModemStatus, .EA = true, .CR = true};
MSCommand.Length = (sizeof(MSCommand.Params) << 1) | 0x01;
MSCommand.Params.Channel = (RFCOMM_Address_t){.DLCI = RFCOMMChannel->DLCI, .EA = true, .CR = true};
MSCommand.Params.BreakSignal = RFCOMMChannel->Local.BreakSignal;
/* Send the MSC command to the remote device */
- RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, true, RFCOMM_Frame_UIH, sizeof(MSCommand), &MSCommand, ACLChannel);
+ RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, true, RFCOMM_Frame_UIH, sizeof(MSCommand), &MSCommand, ACLChannel);
}
/** Sends new data through an open logical RFCOMM channel. This should be used to transmit data through a
{
if (RFCOMMChannel->State != RFCOMM_Channel_Open)
return;
-
+
BT_RFCOMM_DEBUG(1, ">> UIH Frame");
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", RFCOMMChannel->DLCI);
/* Send the MSC command to the remote device */
- RFCOMM_SendFrame(RFCOMMChannel->DLCI, false, RFCOMM_Frame_UIH, DataLen, Data, ACLChannel);
+ RFCOMM_SendFrame(RFCOMMChannel->DLCI, false, RFCOMM_Frame_UIH, DataLen, Data, ACLChannel);
}
RFCOMM_Channel_t* RFCOMM_GetFreeChannelEntry(const uint8_t DLCI)
RFCOMMChannel->Local.Signals = RFCOMM_SIGNAL_RTC | RFCOMM_SIGNAL_RTR | RFCOMM_SIGNAL_DV | (1 << 0);
RFCOMMChannel->Local.BreakSignal = 0 | (1 << 0);
RFCOMMChannel->ConfigFlags = 0;
-
+
return RFCOMMChannel;
}
}
-
+
return NULL;
}
for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
{
RFCOMM_Channel_t* CurrRFCOMMChannel = &RFCOMM_Channels[i];
-
+
/* If the current non-closed channel's DLCI matches the search DLCI, return it to the caller */
if ((CurrRFCOMMChannel->State != RFCOMM_Channel_Closed) && (CurrRFCOMMChannel->DLCI == DLCI))
return CurrRFCOMMChannel;
{
uint8_t FirstOctet;
uint8_t SecondOctet = 0;
-
+
FirstOctet = **BufferPos;
(*BufferPos)++;
-
+
/* If the field size is more than a single byte, fetch the next byte in the variable length field */
if (!(FirstOctet & 0x01))
{
uint8_t Data[DataLen];
uint8_t FCS;
} ResponsePacket;
-
+
/* Set the frame header values to the specified address and frame type */
ResponsePacket.FrameHeader.Control = Control;
ResponsePacket.FrameHeader.Address = (RFCOMM_Address_t){.DLCI = DLCI, .EA = true, .CR = CommandResponse};
-
+
/* Set the lower 7 bits of the packet length */
ResponsePacket.Size[0] = (DataLen << 1);
-
+
/* Terminate the size field if size is 7 bits or lower, otherwise set the upper 8 bits of the length */
if (DataLen < 128)
ResponsePacket.Size[0] |= 0x01;
else
ResponsePacket.Size[1] = (DataLen >> 7);
-
+
/* Copy over the packet data from the source buffer to the response packet buffer */
memcpy(ResponsePacket.Data, Data, DataLen);
-
+
/* Determine the length of the frame which is to be used to calculate the CRC value */
uint8_t CRCLength = sizeof(ResponsePacket.FrameHeader);
/* UIH frames do not have the CRC calculated on the Size field in the response, all other frames do */
if ((Control & ~FRAME_POLL_FINAL) != RFCOMM_Frame_UIH)
CRCLength += sizeof(ResponsePacket.Size);
-
+
/* Calculate the frame checksum from the appropriate fields */
ResponsePacket.FCS = RFCOMM_GetFCSValue(&ResponsePacket, CRCLength);
uint8_t Length)
{
uint8_t FCS = 0xFF;
-
+
/* Calculate new Frame CRC value via the given data bytes and the CRC table */
for (uint8_t i = 0; i < Length; i++)
FCS = pgm_read_byte(&CRC8_Table[FCS ^ ((const uint8_t*)FrameStart)[i]]);
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
-
+
/* If the requested channel is currently open, destroy it */
if (RFCOMMChannel != NULL)
RFCOMMChannel->State = RFCOMM_Channel_Closed;
if (FrameAddress->DLCI == RFCOMM_CONTROL_DLCI)
{
BT_RFCOMM_DEBUG(1, ">> UA Sent");
-
+
/* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */
RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
/* Find the existing channel's entry in the channel table */
RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
-
+
/* Existing entry not found, create a new entry for the channel */
if (RFCOMMChannel == NULL)
RFCOMMChannel = RFCOMM_GetFreeChannelEntry(FrameAddress->DLCI);
if (RFCOMMChannel != NULL)
{
BT_RFCOMM_DEBUG(1, ">> UA Sent");
-
+
/* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */
RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
}
}
static void RFCOMM_ProcessUIH(const RFCOMM_Address_t* const FrameAddress,
- const uint16_t FrameLength,
+ const uint16_t FrameLength,
const uint8_t* FrameData,
Bluetooth_Channel_t* const ACLChannel)
{
BT_RFCOMM_DEBUG(1, "<< UIH Received");
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
BT_RFCOMM_DEBUG(2, "-- Length 0x%02X", FrameLength);
-
+
RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
-
+
if (RFCOMMChannel != NULL)
RFCOMM_DataReceived(RFCOMMChannel, FrameLength, FrameData);
}
+
projects / pub / USBasp.git / blobdiff