Clean up excessive whitespace at the end of each line using the wspurify tool made...

[pub/USBasp.git] / Demos / Device / LowLevel / Mouse / Mouse.c

diff --git a/Demos/Device/LowLevel/Mouse/Mouse.c b/Demos/Device/LowLevel/Mouse/Mouse.c
index 6aa258a..23df2a6 100644 (file)
--- a/Demos/Device/LowLevel/Mouse/Mouse.c
+++ b/Demos/Device/LowLevel/Mouse/Mouse.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.

-              
+

   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */


@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 

-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this

   software and its documentation for any purpose is hereby granted
   software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in

   all copies and that both that the copyright notice and this
   all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the

   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this


@@ -33,7 +33,7 @@
  *  Main source file for the Mouse demo. This file contains the main tasks of the demo and
  *  is responsible for the initial application hardware configuration.
  */
  *  Main source file for the Mouse demo. This file contains the main tasks of the demo and
  *  is responsible for the initial application hardware configuration.
  */

- 
+

 #include "Mouse.h"
 
 /** Indicates what report mode the host has requested, true for normal HID reporting mode, false for special boot
 #include "Mouse.h"
 
 /** Indicates what report mode the host has requested, true for normal HID reporting mode, false for special boot


@@ -47,7 +47,7 @@ bool UsingReportProtocol = true;
 uint16_t IdleCount = HID_IDLE_CHANGESONLY;
 
 /** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
 uint16_t IdleCount = HID_IDLE_CHANGESONLY;
 
 /** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle

- *  milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request 
+ *  milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request

  *  the current idle period via a Get Idle HID class request, thus its value must be preserved.
  */
 uint16_t IdleMSRemaining = 0;
  *  the current idle period via a Get Idle HID class request, thus its value must be preserved.
  */
 uint16_t IdleMSRemaining = 0;


@@ -59,7 +59,7 @@ uint16_t IdleMSRemaining = 0;
 int main(void)
 {
        SetupHardware();
 int main(void)
 {
        SetupHardware();

-       
+

        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
        sei();
 
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
        sei();
 


@@ -110,7 +110,7 @@ void EVENT_USB_Device_Disconnect(void)
 
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
  *  of the USB device after enumeration - the device endpoints are configured and the mouse reporting task started.
 
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
  *  of the USB device after enumeration - the device endpoints are configured and the mouse reporting task started.

- */ 
+ */

 void EVENT_USB_Device_ConfigurationChanged(void)
 {
        bool ConfigSuccess = true;
 void EVENT_USB_Device_ConfigurationChanged(void)
 {
        bool ConfigSuccess = true;


@@ -123,7 +123,7 @@ void EVENT_USB_Device_ConfigurationChanged(void)
        USB_Device_EnableSOFEvents();
 
        /* Indicate endpoint configuration success or failure */
        USB_Device_EnableSOFEvents();
 
        /* Indicate endpoint configuration success or failure */

-       LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); 
+       LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);

 }
 
 /** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific
 }
 
 /** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific


@@ -152,20 +152,20 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
                                /* Clear the report data afterwards */
                                memset(&MouseReportData, 0, sizeof(MouseReportData));
                        }
                                /* Clear the report data afterwards */
                                memset(&MouseReportData, 0, sizeof(MouseReportData));
                        }

-               
+

                        break;
                case REQ_GetProtocol:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
                        {
                                Endpoint_ClearSETUP();
                        break;
                case REQ_GetProtocol:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
                        {
                                Endpoint_ClearSETUP();

-                               
+

                                /* Write the current protocol flag to the host */
                                Endpoint_Write_Byte(UsingReportProtocol);
                                /* Write the current protocol flag to the host */
                                Endpoint_Write_Byte(UsingReportProtocol);

-                               
+

                                Endpoint_ClearIN();
                                Endpoint_ClearStatusStage();
                        }
                                Endpoint_ClearIN();
                                Endpoint_ClearStatusStage();
                        }

-                       
+

                        break;
                case REQ_SetProtocol:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
                        break;
                case REQ_SetProtocol:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))


@@ -176,7 +176,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
                                /* Set or clear the flag depending on what the host indicates that the current Protocol should be */
                                UsingReportProtocol = (USB_ControlRequest.wValue != 0);
                        }
                                /* Set or clear the flag depending on what the host indicates that the current Protocol should be */
                                UsingReportProtocol = (USB_ControlRequest.wValue != 0);
                        }

-                       
+

                        break;
                case REQ_SetIdle:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
                        break;
                case REQ_SetIdle:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))


@@ -187,13 +187,13 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
                                /* Get idle period in MSB, must multiply by 4 to get the duration in milliseconds */
                                IdleCount = ((USB_ControlRequest.wValue & 0xFF00) >> 6);
                        }
                                /* Get idle period in MSB, must multiply by 4 to get the duration in milliseconds */
                                IdleCount = ((USB_ControlRequest.wValue & 0xFF00) >> 6);
                        }

-                       
+

                        break;
                case REQ_GetIdle:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
                        break;
                case REQ_GetIdle:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))

-                       {               
+                       {

                                Endpoint_ClearSETUP();
                                Endpoint_ClearSETUP();

-                               
+

                                /* Write the current idle duration to the host, must be divided by 4 before sent to host */
                                Endpoint_Write_Byte(IdleCount >> 2);
 
                                /* Write the current idle duration to the host, must be divided by 4 before sent to host */
                                Endpoint_Write_Byte(IdleCount >> 2);
 


@@ -221,7 +221,7 @@ void CreateMouseReport(USB_MouseReport_Data_t* const ReportData)
 {
        uint8_t JoyStatus_LCL    = Joystick_GetStatus();
        uint8_t ButtonStatus_LCL = Buttons_GetStatus();
 {
        uint8_t JoyStatus_LCL    = Joystick_GetStatus();
        uint8_t ButtonStatus_LCL = Buttons_GetStatus();

-       
+

        /* Clear the report contents */
        memset(ReportData, 0, sizeof(USB_MouseReport_Data_t));
 
        /* Clear the report contents */
        memset(ReportData, 0, sizeof(USB_MouseReport_Data_t));
 


@@ -237,7 +237,7 @@ void CreateMouseReport(USB_MouseReport_Data_t* const ReportData)
 
        if (JoyStatus_LCL & JOY_PRESS)
          ReportData->Button  = (1 << 0);
 
        if (JoyStatus_LCL & JOY_PRESS)
          ReportData->Button  = (1 << 0);

-         
+

        if (ButtonStatus_LCL & BUTTONS_BUTTON1)
          ReportData->Button |= (1 << 1);
 }
        if (ButtonStatus_LCL & BUTTONS_BUTTON1)
          ReportData->Button |= (1 << 1);
 }


@@ -248,40 +248,40 @@ void SendNextReport(void)
        static USB_MouseReport_Data_t PrevMouseReportData;
        USB_MouseReport_Data_t        MouseReportData;
        bool                          SendReport;
        static USB_MouseReport_Data_t PrevMouseReportData;
        USB_MouseReport_Data_t        MouseReportData;
        bool                          SendReport;

-       
+

        /* Create the next mouse report for transmission to the host */
        CreateMouseReport(&MouseReportData);
        /* Create the next mouse report for transmission to the host */
        CreateMouseReport(&MouseReportData);

-       
+

        /* Check to see if the report data has changed - if so a report MUST be sent */
        SendReport = (memcmp(&PrevMouseReportData, &MouseReportData, sizeof(USB_MouseReport_Data_t)) != 0);
        /* Check to see if the report data has changed - if so a report MUST be sent */
        SendReport = (memcmp(&PrevMouseReportData, &MouseReportData, sizeof(USB_MouseReport_Data_t)) != 0);

-       
+

        /* Override the check if the Y or X values are non-zero - we want continuous movement while the joystick
         * is being held down (via continuous reports), otherwise the cursor will only move once per joystick toggle */
        if ((MouseReportData.Y != 0) || (MouseReportData.X != 0))
          SendReport = true;
        /* Override the check if the Y or X values are non-zero - we want continuous movement while the joystick
         * is being held down (via continuous reports), otherwise the cursor will only move once per joystick toggle */
        if ((MouseReportData.Y != 0) || (MouseReportData.X != 0))
          SendReport = true;

-       
+

        /* Check if the idle period is set and has elapsed */
        if ((IdleCount != HID_IDLE_CHANGESONLY) && (!(IdleMSRemaining)))
        {
                /* Reset the idle time remaining counter */
                IdleMSRemaining = IdleCount;
        /* Check if the idle period is set and has elapsed */
        if ((IdleCount != HID_IDLE_CHANGESONLY) && (!(IdleMSRemaining)))
        {
                /* Reset the idle time remaining counter */
                IdleMSRemaining = IdleCount;

-               
+

                /* Idle period is set and has elapsed, must send a report to the host */
                SendReport = true;
        }
                /* Idle period is set and has elapsed, must send a report to the host */
                SendReport = true;
        }

-       
+

        /* Select the Mouse Report Endpoint */
        Endpoint_SelectEndpoint(MOUSE_EPNUM);
 
        /* Check if Mouse Endpoint Ready for Read/Write and if we should send a new report */
        if (Endpoint_IsReadWriteAllowed() && SendReport)
        /* Select the Mouse Report Endpoint */
        Endpoint_SelectEndpoint(MOUSE_EPNUM);
 
        /* Check if Mouse Endpoint Ready for Read/Write and if we should send a new report */
        if (Endpoint_IsReadWriteAllowed() && SendReport)

-       {       
+       {

                /* Save the current report data for later comparison to check for changes */
                PrevMouseReportData = MouseReportData;
 
                /* Write Mouse Report Data */
                Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData));
                /* Save the current report data for later comparison to check for changes */
                PrevMouseReportData = MouseReportData;
 
                /* Write Mouse Report Data */
                Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData));

-               
+

                /* Finalize the stream transfer to send the last packet */
                Endpoint_ClearIN();
        }
                /* Finalize the stream transfer to send the last packet */
                Endpoint_ClearIN();
        }


@@ -293,7 +293,8 @@ void Mouse_Task(void)
        /* Device must be connected and configured for the task to run */
        if (USB_DeviceState != DEVICE_STATE_Configured)
          return;
        /* Device must be connected and configured for the task to run */
        if (USB_DeviceState != DEVICE_STATE_Configured)
          return;

-         
+

        /* Send the next mouse report to the host */
        SendNextReport();
 }
        /* Send the next mouse report to the host */
        SendNextReport();
 }

+