Clean up excessive whitespace at the end of each line using the wspurify tool made...

[pub/USBasp.git] / Demos / Device / LowLevel / DualVirtualSerial / DualVirtualSerial.c

diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
index 6746308..45159a8 100644 (file)
--- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
+++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.

-              
+

   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */


@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 

-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this

   software and its documentation for any purpose is hereby granted
   software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in

   all copies and that both that the copyright notice and this
   all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the

   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this


@@ -33,7 +33,7 @@
  *  Main source file for the DualVirtualSerial demo. This file contains the main tasks of the demo and
  *  is responsible for the initial application hardware configuration.
  */
  *  Main source file for the DualVirtualSerial demo. This file contains the main tasks of the demo and
  *  is responsible for the initial application hardware configuration.
  */

- 
+

 #include "DualVirtualSerial.h"
 
 /** Contains the current baud rate and other settings of the first virtual serial port. While this demo does not use
 #include "DualVirtualSerial.h"
 
 /** Contains the current baud rate and other settings of the first virtual serial port. While this demo does not use


@@ -69,7 +69,7 @@ CDC_Line_Coding_t LineEncoding2 = { .BaudRateBPS = 0,
 int main(void)
 {
        SetupHardware();
 int main(void)
 {
        SetupHardware();

-       
+

        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
        sei();
 
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
        sei();
 


@@ -160,14 +160,14 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
        {
                case REQ_GetLineEncoding:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
        {
                case REQ_GetLineEncoding:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))

-                       {       
+                       {

                                Endpoint_ClearSETUP();
 
                                /* Write the line coding data to the control endpoint */
                                Endpoint_ClearSETUP();
 
                                /* Write the line coding data to the control endpoint */

-                               Endpoint_Write_Control_Stream_LE(LineEncodingData, sizeof(CDC_Line_Coding_t));                          
+                               Endpoint_Write_Control_Stream_LE(LineEncodingData, sizeof(CDC_Line_Coding_t));

                                Endpoint_ClearOUT();
                        }
                                Endpoint_ClearOUT();
                        }

-                       
+

                        break;
                case REQ_SetLineEncoding:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
                        break;
                case REQ_SetLineEncoding:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))


@@ -178,7 +178,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
                                Endpoint_Read_Control_Stream_LE(LineEncodingData, sizeof(CDC_Line_Coding_t));
                                Endpoint_ClearIN();
                        }
                                Endpoint_Read_Control_Stream_LE(LineEncodingData, sizeof(CDC_Line_Coding_t));
                                Endpoint_ClearIN();
                        }

-       
+

                        break;
                case REQ_SetControlLineState:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
                        break;
                case REQ_SetControlLineState:
                        if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))


@@ -186,7 +186,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
                                Endpoint_ClearSETUP();
                                Endpoint_ClearStatusStage();
                        }
                                Endpoint_ClearSETUP();
                                Endpoint_ClearStatusStage();
                        }

-       
+

                        break;
        }
 }
                        break;
        }
 }


@@ -199,7 +199,7 @@ void CDC1_Task(void)
        char*       ReportString    = NULL;
        uint8_t     JoyStatus_LCL   = Joystick_GetStatus();
        static bool ActionSent      = false;
        char*       ReportString    = NULL;
        uint8_t     JoyStatus_LCL   = Joystick_GetStatus();
        static bool ActionSent      = false;

-       
+

        /* Device must be connected and configured for the task to run */
        if (USB_DeviceState != DEVICE_STATE_Configured)
          return;
        /* Device must be connected and configured for the task to run */
        if (USB_DeviceState != DEVICE_STATE_Configured)
          return;


@@ -222,26 +222,26 @@ void CDC1_Task(void)
        if ((ReportString != NULL) && (ActionSent == false) && LineEncoding1.BaudRateBPS)
        {
                ActionSent = true;
        if ((ReportString != NULL) && (ActionSent == false) && LineEncoding1.BaudRateBPS)
        {
                ActionSent = true;

-               
+

                /* Select the Serial Tx Endpoint */
                Endpoint_SelectEndpoint(CDC1_TX_EPNUM);
 
                /* Write the String to the Endpoint */
                Endpoint_Write_Stream_LE(ReportString, strlen(ReportString));
                /* Select the Serial Tx Endpoint */
                Endpoint_SelectEndpoint(CDC1_TX_EPNUM);
 
                /* Write the String to the Endpoint */
                Endpoint_Write_Stream_LE(ReportString, strlen(ReportString));

-               
+

                /* Finalize the stream transfer to send the last packet */
                Endpoint_ClearIN();
 
                /* Wait until the endpoint is ready for another packet */
                Endpoint_WaitUntilReady();
                /* Finalize the stream transfer to send the last packet */
                Endpoint_ClearIN();
 
                /* Wait until the endpoint is ready for another packet */
                Endpoint_WaitUntilReady();

-               
+

                /* Send an empty packet to ensure that the host does not buffer data sent to it */
                Endpoint_ClearIN();
        }
 
        /* Select the Serial Rx Endpoint */
        Endpoint_SelectEndpoint(CDC1_RX_EPNUM);
                /* Send an empty packet to ensure that the host does not buffer data sent to it */
                Endpoint_ClearIN();
        }
 
        /* Select the Serial Rx Endpoint */
        Endpoint_SelectEndpoint(CDC1_RX_EPNUM);

-       
+

        /* Throw away any received data from the host */
        if (Endpoint_IsOUTReceived())
          Endpoint_ClearOUT();
        /* Throw away any received data from the host */
        if (Endpoint_IsOUTReceived())
          Endpoint_ClearOUT();


@@ -258,16 +258,16 @@ void CDC2_Task(void)
 
        /* Select the Serial Rx Endpoint */
        Endpoint_SelectEndpoint(CDC2_RX_EPNUM);
 
        /* Select the Serial Rx Endpoint */
        Endpoint_SelectEndpoint(CDC2_RX_EPNUM);

-       
+

        /* Check to see if any data has been received */
        if (Endpoint_IsOUTReceived())
        {
                /* Create a temp buffer big enough to hold the incoming endpoint packet */
                uint8_t  Buffer[Endpoint_BytesInEndpoint()];
        /* Check to see if any data has been received */
        if (Endpoint_IsOUTReceived())
        {
                /* Create a temp buffer big enough to hold the incoming endpoint packet */
                uint8_t  Buffer[Endpoint_BytesInEndpoint()];

-               
+

                /* Remember how large the incoming packet is */
                uint16_t DataLength = Endpoint_BytesInEndpoint();
                /* Remember how large the incoming packet is */
                uint16_t DataLength = Endpoint_BytesInEndpoint();

-       
+

                /* Read in the incoming packet into the buffer */
                Endpoint_Read_Stream_LE(&Buffer, DataLength);
 
                /* Read in the incoming packet into the buffer */
                Endpoint_Read_Stream_LE(&Buffer, DataLength);
 


@@ -276,7 +276,7 @@ void CDC2_Task(void)
 
                /* Select the Serial Tx Endpoint */
                Endpoint_SelectEndpoint(CDC2_TX_EPNUM);
 
                /* Select the Serial Tx Endpoint */
                Endpoint_SelectEndpoint(CDC2_TX_EPNUM);

-               
+

                /* Write the received data to the endpoint */
                Endpoint_Write_Stream_LE(&Buffer, DataLength);
 
                /* Write the received data to the endpoint */
                Endpoint_Write_Stream_LE(&Buffer, DataLength);
 


@@ -290,3 +290,4 @@ void CDC2_Task(void)
                Endpoint_ClearIN();
        }
 }
                Endpoint_ClearIN();
        }
 }

+