Clean up excessive whitespace at the end of each line using the wspurify tool made...

[pub/USBasp.git] / Demos / Device / ClassDriver / MassStorageKeyboard / MassStorageKeyboard.txt

diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
index 2a579c8..f93a5ff 100644 (file)
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
@@ -3,7 +3,7 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */

- 
+

 /** \mainpage Combined Mass Storage and Keyboard Device Demo
  *
  *  \section SSec_Compat Demo Compatibility:
 /** \mainpage Combined Mass Storage and Keyboard Device Demo
  *
  *  \section SSec_Compat Demo Compatibility:


@@ -29,7 +29,7 @@
  *    <td>Mass Storage Device \n
  *        Human Interface Device</td>
  *   </tr>
  *    <td>Mass Storage Device \n
  *        Human Interface Device</td>
  *   </tr>

- *   <tr> 
+ *   <tr>

  *    <td><b>USB Subclasses:</b></td>
  *    <td>Bulk-Only Transport \n
  *        Keyboard Subclass</td>
  *    <td><b>USB Subclasses:</b></td>
  *    <td>Bulk-Only Transport \n
  *        Keyboard Subclass</td>


@@ -49,24 +49,24 @@
  *   </tr>
  *  </table>
  *
  *   </tr>
  *  </table>
  *

- *  \section SSec_Description Project Description: 
+ *  \section SSec_Description Project Description:

  *
  *  Combined Mass Storage and Keyboard demonstration application. This gives a
  *  simple reference application for implementing a dual class USB Mass Storage
  *  and USB HID Keyboard device using the basic USB UFI and HID drivers in all
  *  modern OSes (i.e. no special drivers required).
  *
  *  Combined Mass Storage and Keyboard demonstration application. This gives a
  *  simple reference application for implementing a dual class USB Mass Storage
  *  and USB HID Keyboard device using the basic USB UFI and HID drivers in all
  *  modern OSes (i.e. no special drivers required).

- *  
+ *

  *  On start-up the system will automatically enumerate and function as an
  *  external mass storage device (which may be formatted and used in the same
  *  manner as commercial USB Mass Storage devices) and a USB keyboard.
  *  On start-up the system will automatically enumerate and function as an
  *  external mass storage device (which may be formatted and used in the same
  *  manner as commercial USB Mass Storage devices) and a USB keyboard.

- *     
+ *

  *  You will need to format the mass storage drive upon first run of this
  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.
  *
  *  Keys on the USB keyboard can be pressed by moving the board's Joystick.
  *  You will need to format the mass storage drive upon first run of this
  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.
  *
  *  Keys on the USB keyboard can be pressed by moving the board's Joystick.

- *  
+ *

  *  The USB control endpoint is managed entirely by the library using endpoint
  *  interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
  *  the host to reset the Mass Storage device state during long transfers without
  *  The USB control endpoint is managed entirely by the library using endpoint
  *  interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
  *  the host to reset the Mass Storage device state during long transfers without


@@ -90,3 +90,4 @@
  *   </tr>
  *  </table>
  */
  *   </tr>
  *  </table>
  */

+